Allow both user-only and system mode to run pa2.0 cpus.
Avoid creating a separate qemu-system-hppa64 binary;
force the qemu-hppa binary to use TARGET_ABI32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hoist the resolution of d up one level above do_unit_cond.
All computations are logical, and are simplified by using a mask of the
correct width, after which the result may be compared with zero.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hoist the resolution of d up one level above do_sed_cond.
The MOVB comparison and the existing shift/extract/deposit
are all 32-bit.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The sar shift amount register is limited to 5 bits when running
a 32-bit CPU. Strip off the remaining bits.
The interesting part is, that this register allows to detect at runtime
if a physical CPU is capable to execute PA2.0 (64-bit) instructions.
Signed-off-by: Helge Deller <deller@gmx.de>
We need to make sure the link is masked properly along the
use_nullify_skip path. The other three settings of a link
register already use this.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will be how we ensure that the IAOQ is always
valid per PSW.W, therefore all stores to these two
variables must be done with this function.
Use third argument -1 if the destination is always dynamic,
and fourth argument NULL if the destination is always static.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In form_gva and cpu_get_tb_cpu_state, we must truncate when PSW_W == 0.
In space_select, the bits that choose the space depend on PSW_W.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prepare for the qemu binary supporting both pa10 and pa20
at the same time.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Select the proper carry bit for input to the arithmetic
and for output for the condition.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This instruction always uses the input carry from bit 32,
but produces all 16 output carry bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The destination is TCGv_i32, so use tcg_gen_qemu_ld_i32
not tcg_gen_qemu_ld_reg.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace with tcg_temp_new_tl without recording into ctx.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace with tcg_temp_new without recording into ctx.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a separate mmu index for PSW_P enabled vs disabled.
This means we can elide the tlb flush in cpu_hppa_put_psw
when PSW_P changes. This turns out to be the majority
of all tlb flushes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wire up the hppa diag instruction to support Block-TLBs
when called with the 0x100 value.
The diag_btlb() helper function does all necessary steps
to emulate the PDC BTLB firmware function, which includes
providing BTLB info, adding a new BTLB, deleting a BTLB
and removing all BTLBs.
Signed-off-by: Helge Deller <deller@gmx.de>
All these files only access the translator_ld/st API declared
in "exec/translator.h". The CPU ld/st API from declared in
"exec/cpu_ldst.h" is not used, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-5-philmd@linaro.org>
Add two macros which convert privilege level to/from MMU index:
- PRIV_TO_MMU_IDX(priv)
returns the MMU index for the given privilege level
- MMU_IDX_TO_PRIV(mmu_idx)
returns the corresponding privilege level for this MMU index
The introduction of those macros make the code easier to read and
will help to improve performance in follow-up patch.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses were read-write, so replace with a new
allocation and initialization.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a C test instead of a pre-processor test for the id.
Use tcg_constant_i64 instead of tcg_const_i64.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wasn't actually used at all, just some unused
macro re-definitions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fid instruction (Floating-Point Identify) puts the FPU model and
revision into the Status Register. Since those values shouldn't be 0,
store values there which a PCX-L2 (for 32-bit) or a PCX-W2 (for 64-bit)
would return. Noticed while trying to install MPE/iX.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Qemu currently emulates a 32-bit CPU only, and crashes with this error
when it faces a 64-bit load (e.g. "ldd 0(r26),r0") or a 64-bit store
(e.g. "std r26,0(r26)") instruction in the guest:
ERROR:../qemu/tcg/tcg-op.c:2822:tcg_canonicalize_memop: code should not be reached
Add checks for 64-bit sizes and generate an illegal instruction
exception if necessary.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
