The new decoder likes to compute the address in A0 very early, so the
gen_lea_v_seg in gen_pop_T0 would clobber the address of the memory
operand. Instead use T0 since it is already available and will be
overwritten immediately after.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_lea_v_seg (called by gen_add_A0_ds_seg) already zeroes any
bits of s->A0 beyond s->aflag. It does so before summing the
segment base and, if not in 64-bit mode, also after summing it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OF is equal to the carry flag, so use the same CCPrepare.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take advantage of the fact that there can be no 1 bits between SF and OF.
If they were adjacent, you could sum SF and get a carry only if SF was
already set. Then the value of OF in the sum is the XOR of OF itself,
the carry (which is SF) and 0 (the value of the OF bit in the addend):
this is OF^SF exactly.
Because OF and SF are not adjacent, just place more 1 bits to the
left so that the carry propagates, which means summing CC_O - CC_S.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In 32-bit mode, pc = eip + cs_base is also 32-bit, and must wrap.
Failure to do so results in incorrect memory exceptions to the guest.
Before 732d548732ed, this was implicitly done via truncation to
target_ulong but only in qemu-system-i386, not qemu-system-x86_64.
To fix this, we must add conditional zero-extensions.
Since we have to test for 32 vs 64-bit anyway, note that cs_base
is always zero in 64-bit mode.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2022
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231212172510.103305-1-richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
(target/ was cleaned from invalid CONFIG_SOFTMMU uses at
commit cab35c73be, but these files were merged few days
after, thus missed the cleanup.)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004082239.27251-1-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just remove the declaration. There is nothing in the function after the
switch statement, so it is safe to do.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
32-bit binaries can run on a long mode processor even if the kernel
is 64-bit, of course, and this can have slightly different behavior;
for example, SYSCALL is allowed on Intel processors.
Allow reporting LM to programs running under user mode emulation,
so that "-cpu" can be used with named CPU models even for qemu-i386
and even without disabling LM by hand.
Fortunately, most of the runtime code in QEMU has to depend on HF_LMA_MASK
or on HF_CS64_MASK (which is anyway false for qemu-i386's 32-bit code
segment) rather than TARGET_X86_64, therefore all that is needed is an
update of linux-user's ring 0 setup.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1534
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only
exposes it for 64-bit targets. For system emulation just reuse the
helper; for user-mode emulation the ABI is the same as "int $80".
The BSDs does not support any fast system call mechanism in 32-bit
mode so add to bsd-user the same stub that FreeBSD has for 64-bit
compatibility mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RDPID corresponds to a RDMSR(TSC_AUX); however, it is unprivileged
so for user-mode emulation we must provide the value that the kernel
places in the MSR. For Linux, it is a combination of the current CPU
and the current NUMA node, both of which can be retrieved with getcpu(2).
Also try sched_getcpu(), which might be there on the BSDs. If there is
no portable way to retrieve the current CPU id from userspace, return 0.
RDTSCP is reimplemented as RDTSC + RDPID ECX; the differences in terms
of serializability are not relevant to QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WBNOINVD is the same as INVD or WBINVD as far as TCG is concerned,
since there is no cache in TCG and therefore no invalidation side effect
in WBNOINVD.
With respect to SVM emulation, processors that do not support WBNOINVD
will ignore the prefix and treat it as WBINVD, while those that support
it will generate exactly the same vmexit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to a typo or perhaps a brain fart, the INVD vmexit was never generated.
Fix it (but not that fixing just the typo would break both INVD and WBINVD,
due to a case of two wrongs making a right).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since cpu_mmu_index() is well-defined for user-only,
we can remove the surrounding #ifdef'ry entirely.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses are strictly read-only. Most of the obviously so,
as direct arguments to gen_helper_*.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compute the eflags write mask separately, leaving one call
to the helper. Use tcg_constant_i32.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since tcg_temp_new is now identical, use that.
In some cases we can avoid a copy from A0 or T0.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-8-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_gen_atomic_cmpxchg_i128 for the atomic case,
and tcg_gen_qemu_ld/st_i128 otherwise.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_gen_atomic_cmpxchg_i64 for the atomic case,
and tcg_gen_nonatomic_cmpxchg_i64 otherwise.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When translating code that is using LAHF and SAHF in combination with the
REX prefix, the instructions should not use any other register than AH;
however, QEMU selects SPL (SP being register 4, just like AH) if the
REX prefix is present. To fix this, use deposit directly without
going through gen_op_mov_v_reg and gen_op_mov_reg_v.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/130
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unlike the memory case, where "the destination operand receives a write
cycle without regard to the result of the comparison", rm must not be
touched altogether if the write fails, including not zero-extending
it on 64-bit processors. This is not how the movcond currently works,
because it is always followed by a gen_op_mov_reg_v to rm.
To fix it, introduce a new function that is similar to gen_op_mov_reg_v
but writes to a TCG temporary.
Considering that gen_extu(ot, oldv) is not needed in the memory case
either, the two cases for register and memory destinations are different
enough that one might as well fuse the two "if (mod == 3)" into one.
So do that too.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/508
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[rth: Add a test case ]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The helpers for reset_rf, cli, sti, clac, stac are
completely trivial; implement them inline.
Drop some nearby #if 0 code.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
