The 970 logic does not apply to dcbzep, which is an e500 insn.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of passing a bool and select a value within dcbz_common() let
the callers pass in the right value to avoid this conditional
statement. On PPC dcbz is often used to zero memory and some code uses
it a lot. This change improves the run time of a test case that copies
memory with a dcbz call in every iteration from 6.23 to 5.83 seconds.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240622204833.5F7C74E6000@zero.eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Avoid a race condition with munmap in another thread.
Use around blocks that exclusively use "host_fn".
Keep the blocks as small as possible, but without setting
and clearing for every operation on one page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use these in helper_dc_dva and the FEAT_MOPS routines to
avoid a race condition with munmap in another thread.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Starting with the "Sandy Bridge" generation, Intel CPUs provide a RAPL
interface (Running Average Power Limit) for advertising the accumulated
energy consumption of various power domains (e.g. CPU packages, DRAM,
etc.).
The consumption is reported via MSRs (model specific registers) like
MSR_PKG_ENERGY_STATUS for the CPU package power domain. These MSRs are
64 bits registers that represent the accumulated energy consumption in
micro Joules. They are updated by microcode every ~1ms.
For now, KVM always returns 0 when the guest requests the value of
these MSRs. Use the KVM MSR filtering mechanism to allow QEMU handle
these MSRs dynamically in userspace.
To limit the amount of system calls for every MSR call, create a new
thread in QEMU that updates the "virtual" MSR values asynchronously.
Each vCPU has its own vMSR to reflect the independence of vCPUs. The
thread updates the vMSR values with the ratio of energy consumed of
the whole physical CPU package the vCPU thread runs on and the
thread's utime and stime values.
All other non-vCPU threads are also taken into account. Their energy
consumption is evenly distributed among all vCPUs threads running on
the same physical CPU package.
To overcome the problem that reading the RAPL MSR requires priviliged
access, a socket communication between QEMU and the qemu-vmsr-helper is
mandatory. You can specified the socket path in the parameter.
This feature is activated with -accel kvm,rapl=true,path=/path/sock.sock
Actual limitation:
- Works only on Intel host CPU because AMD CPUs are using different MSR
adresses.
- Only the Package Power-Plane (MSR_PKG_ENERGY_STATUS) is reported at
the moment.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-4-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, there is no way to execute the query-cpu-model-expansion
command to retrieve a comprehenisve list of deprecated properties, as
the result is dependent per-model. To enable this, the expansion output
is modified as such:
When reporting a "full" CPU model, show the *entire* list of deprecated
properties regardless if they are supported on the model. A full
expansion outputs all known CPU model properties anyway, so it makes
sense to report all deprecated properties here too.
This allows management apps to query a single model (e.g. host) to
acquire the full list of deprecated properties.
Additionally, when reporting a "static" CPU model, the command will
only show deprecated properties that are a subset of the model's
*enabled* properties. This is more accurate than how the query was
handled before, which blindly reported deprecated properties that
were never otherwise introduced for certain models.
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-ID: <20240719181741.35146-1-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The semihosting feature depends on TCG (due to the probe_access
API access). Although TCG is the single accelerator currently
available for the xtensa target, use the Kconfig "imply" directive
which is more correct (if we were to support a different accel).
Reported-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-8-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-15-alex.bennee@linaro.org>
Semihosting currently uses the TCG probe_access API. To prepare for
encoding the TCG dependency in Kconfig, do not enable it unless TCG
is available.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240717105723.58965-7-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-14-alex.bennee@linaro.org>
Semihosting currently uses the TCG probe_access API. To prepare for
encoding the TCG dependency in Kconfig, do not enable it unless TCG
is available.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240717105723.58965-6-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-13-alex.bennee@linaro.org>
The semihosting feature depends on TCG (due to the probe_access
API access). Although TCG is the single accelerator currently
available for the m68k target, use the Kconfig "imply" directive
which is more correct (if we were to support a different accel).
Reported-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-5-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-12-alex.bennee@linaro.org>
Since the SEMIHOSTING feature is optional, we need
a stub to link when it is disabled.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-4-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-11-alex.bennee@linaro.org>
Since the SEMIHOSTING feature is optional, we need
a stub to link when it is disabled.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-3-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-10-alex.bennee@linaro.org>
Coverity reported a memory leak (CID 1549757) in this code and its
admittedly rather clumsy handling of extending the command table.
Instead of handing over a full array of the commands lets use the
lighter weight GPtrArray and simply test for the presence of each
entry as we go. This avoids complications of transferring ownership of
arrays and keeps the final command entries as static entries in the
target code.
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Gustavo Bueno Romero <gustavo.romero@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-4-alex.bennee@linaro.org>
GDB already support LoongArch vector extension[1], QEMU gdb adds
LoongArch vector registers support, so that users can use 'info all-registers'
to get all vector registers values.
[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=1e9569f383a3d5a88ee07d0c2401bd95613c222e
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewd-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240711024454.3075183-1-gaosong@loongson.cn>
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
-----BEGIN PGP SIGNATURE-----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=/aEm
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaZFlUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3iJuEACtVh1Wp93XMsL3llAZkQlx
# DUCnDCvAM2qiiTIMOqPQzeKTIkRV9aFh1YWzOtMFKai6UkBU6p1b4bPqb5SIr99G
# Ayps4+WzAHsjTqBGEpIIDWL6GqMwv9azBnRAYNb+Cg9O3SzEnCdGOKCfGYTXXPRz
# zQ1NIgqZSUC5jg3XgkU22J3VMsOUWijbzxnGXhOyemSIEhREl+t6Ns3ca3n47/jk
# JIw1g6o0mpefPPkaLq6ftVwpn1L63iYQugn4VCrIhtIoOM8vmnShbI9/GwzL4AYk
# n28nwPl948Xby13kCYmu6Slt8Rmm7M33pBDJzsVtbaeBSd44XHrov8Y1+e1FhAco
# lxrWY/2rG9HiWKGLdAeCKwVxB186DKiTmuK7lcN+eBu3VbOLjDiVE0d1bK4HqGyc
# nzA/Aq81Y9p5Z7wzX40sVFlq0j1pQDQWk6GgPfMA4ueHKEEobxC3C+k1q9m02gjQ
# qesOFzViiGe0j7JER84qqcatIaTk09xfbXL/uMZx8oP/iKa1pyMUx2blChXOXVTx
# oGkO2h3/QCpRIos8d8WM/bso16EkpraInM4748iumSLuxDxTwiIikK/hpsCLDwUN
# dLsH/hAMz+yQOFubFoRt4IlsGVnk5asmTDMb4S8RojdF2KzHuzbJMgdEOe62631g
# IOAc7Tn3TIm5MpAxXOXgJA==
# =/aEm
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 11:19:17 PM AEST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
hvf: arm: Do not advance PC when raising an exception
tests/arm-cpu-features: Do not assume PMU availability
tests/tcg/aarch64: Add test cases for SME FMOPA (widening)
target/arm: Use FPST_F16 for SME FMOPA (widening)
target/arm: Use float_status copy in sme_fmopa_s
hw/arm/smmu: Refactor SMMU OAS
hw/arm/smmuv3: Support and advertise nesting
hw/arm/smmuv3: Handle translation faults according to SMMUPTWEventInfo
hw/arm/smmuv3: Support nested SMMUs in smmuv3_notify_iova()
hw/arm/smmu: Support nesting in the rest of commands
hw/arm/smmu: Introduce smmu_iotlb_inv_asid_vmid
hw/arm/smmu: Support nesting in smmuv3_range_inval()
hw/arm/smmu-common: Support nested translation
hw/arm/smmu-common: Add support for nested TLB
hw/arm/smmu-common: Rework TLB lookup for nesting
hw/arm/smmuv3: Translate CD and TT using stage-2 table
hw/arm/smmu: Introduce CACHED_ENTRY_TO_ADDR
hw/arm/smmu: Consolidate ASID and VMID types
hw/arm/smmu: Split smmuv3_translate()
hw/arm/smmu: Use enum for SMMU stage
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
hvf did not advance PC when raising an exception for most unhandled
system registers, but it mistakenly advanced PC when raising an
exception for GICv3 registers.
Cc: qemu-stable@nongnu.org
Fixes: a2260983c655 ("hvf: arm: Add support for GICv3")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240716-pmu-v3-4-8c7c1858a227@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This operation has float16 inputs and thus must use
the FZ16 control not the FZ control.
Cc: qemu-stable@nongnu.org
Fixes: 3916841ac75 ("target/arm: Implement FMOPA, FMOPS (widening)")
Reported-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-3-richard.henderson@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2374
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We made a copy above because the fp exception flags
are not propagated back to the FPST register, but
then failed to use the copy.
Cc: qemu-stable@nongnu.org
Fixes: 558e956c719 ("target/arm: Implement FMOPA, FMOPS (non-widening)")
Signed-off-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-2-richard.henderson@linaro.org
[rth: Split from a larger patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit c1a1f80518d360b when we added the FEAT_LSE2 relaxations to
the alignment requirements for atomic and ordered loads and stores,
we didn't quite get it right for LDAPR/LDAPRH/LDAPRB with no
immediate offset. These instructions were handled in the old decoder
as part of disas_ldst_atomic(), but unlike all the other insns that
function decoded (LDADD, LDCLR, etc) these insns are "ordered", not
"atomic", so they should be using check_ordered_align() rather than
check_atomic_align(). Commit c1a1f80518d360b used
check_atomic_align() regardless for everything in
disas_ldst_atomic(). We then carried that incorrect check over in
the decodetree conversion, where LDAPR/LDAPRH/LDAPRB are now handled
by trans_LDAPR().
The effect is that when FEAT_LSE2 is implemented, these instructions
don't honour the SCTLR_ELx.nAA bit and will generate alignment
faults when they should not.
(The LDAPR insns with an immediate offset were in disas_ldst_ldapr_stlr()
and then in trans_LDAPR_i() and trans_STLR_i(), and have always used
the correct check_ordered_align().)
Use check_ordered_align() in trans_LDAPR().
Cc: qemu-stable@nongnu.org
Fixes: c1a1f80518d360b ("target/arm: Relax ordered/atomic alignment checks for LSE2")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240709134504.3500007-3-peter.maydell@linaro.org
When we converted the LDAPR/STLR instructions to decodetree we
accidentally introduced a regression where the offset is negative.
The 9-bit immediate field is signed, and the old hand decoder
correctly used sextract32() to get it out of the insn word,
but the ldapr_stlr_i pattern in the decode file used "imm:9"
instead of "imm:s9", so it treated the field as unsigned.
Fix the pattern to treat the field as a signed immediate.
Cc: qemu-stable@nongnu.org
Fixes: 2521b6073b7 ("target/arm: Convert LDAPR/STLR (imm) to decodetree")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2419
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240709134504.3500007-2-peter.maydell@linaro.org
* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5
-----BEGIN PGP SIGNATURE-----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=pM6B
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.1
* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmaYeUcACgkQr3yVEwxT
# gBMtdw//U2NbmnmECa0uXuE7fdFul0tUkl2oHb9Cr8g5Se5g/HVFqexAKOFZ8Lcm
# DvTl94zJ2dms4RntcmJHwTIusa+oU6qqOekediotjgpeH4BHZNCOHe0E9hIAHn9F
# uoJ1P186L7VeVr7OFAAgSCE7F6egCk7iC0h8L8/vuL4xcuyfbZ2r7ybiTl1+45N2
# YBBv5/00wsYnyMeqRYYtyqgX9QR017JRqNSfTJSbKxhQM/L1GA1xxisUvIGeyDqc
# Pn8E3dMN6sscR6bPs4RP+SBi0JIlRCgth/jteSUkbYf42osw3/5sl4oK/e6Xiogo
# SjELOF7QJNxE8H6EUIScDaCVB5ZhvELZcuOL2NRdUuVDkjhWXM633HwfEcXkZdFK
# W/H9wOvNxPAJIOGXOpv10+MLmhdyIOZwE0uk6evHvdcTn3FP9DurdUCc1se0zKOA
# Qg/H6usTbLGNQ7KKTNQ6GpQ6u89iE1CIyZqYVvB1YuF5t7vtAmxvNk3SVZ6aq3VL
# lPJW2Zd1eO09Q+kRnBVDV7MV4OJrRNsU+ryd91NrSVo9aLADtyiNC28dCSkjU3Gn
# 6YQZt65zHuhH5IBB/PGIPo7dLRT8KNWOiYVoy3c6p6DC6oXsKIibh0ue1nrVnnVQ
# NRqyxPYaj6P8zzqwTk+iJj36UXZZVtqPIhtRu9MrO6Opl2AbsXI=
# =pM6B
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 12:09:11 PM AEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu: (30 commits)
roms/opensbi: Update to v1.5
hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate'
target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR
target/riscv: Expose the Smcntrpmf config
target/riscv: Do not setup pmu timer if OF is disabled
target/riscv: More accurately model priv mode filtering.
target/riscv: Start counters from both mhpmcounter and mcountinhibit
target/riscv: Enforce WARL behavior for scounteren/hcounteren
target/riscv: Save counter values during countinhibit update
target/riscv: Implement privilege mode filtering for cycle/instret
target/riscv: Only set INH fields if priv mode is available
target/riscv: Add cycle & instret privilege mode filtering support
target/riscv: Add cycle & instret privilege mode filtering definitions
target/riscv: Add cycle & instret privilege mode filtering properties
target/riscv: Fix the predicate functions for mhpmeventhX CSRs
target/riscv: Combine set_mode and set_virt functions.
target/riscv/kvm: update KVM regs to Linux 6.10-rc5
disas/riscv: Add decode for Zawrs extension
target/riscv: Validate the mode in write_vstvec
disas/riscv: Support zabha disassemble
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both CSRRS and CSRRC always read the addressed CSR and cause any read side
effects regardless of rs1 and rd fields. Note that if rs1 specifies a register
holding a zero value other than x0, the instruction will still attempt to write
the unmodified value back to the CSR and will cause any attendant side effects.
So if CSRRS or CSRRC tries to write a read-only CSR with rs1 which specifies
a register holding a zero value, an illegal instruction exception should be
raised.
Signed-off-by: Yu-Ming Chang <yumin686@andestech.com>
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <172100444279.18077.6893072378718059541-0@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a new config for Smcntrpmf extension so that it can be enabled/
disabled from the qemu commandline.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-13-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The timer is setup function is invoked in both hpmcounter
write and mcountinhibit write path. If the OF bit set, the
LCOFI interrupt is disabled. There is no benefitting in
setting up the qemu timer until LCOFI is cleared to indicate
that interrupts can be fired again.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-12-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In case of programmable counters configured to count inst/cycles
we often end-up with counter not incrementing at all from kernel's
perspective.
For example:
- Kernel configures hpm3 to count instructions and sets hpmcounter
to -10000 and all modes except U mode are inhibited.
- In QEMU we configure a timer to expire after ~10000 instructions.
- Problem is, it's often the case that kernel might not even schedule
Umode task and we hit the timer callback in QEMU.
- In the timer callback we inject the interrupt into kernel, kernel
runs the handler and reads hpmcounter3 value.
- Given QEMU maintains individual counters to count for each privilege
mode, and given umode never ran, the umode counter didn't increment
and QEMU returns same value as was programmed by the kernel when
starting the counter.
- Kernel checks for overflow using previous and current value of the
counter and reprograms the counter given there wasn't an overflow
as per the counter value. (Which itself is a problem. We have QEMU
telling kernel that counter3 overflowed but the counter value
returned by QEMU doesn't seem to reflect that.).
This change makes sure that timer is reprogrammed from the handler
if the counter didn't overflow based on the counter value.
Second, this change makes sure that whenever the counter is read,
it's value is updated to reflect the latest count.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-11-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently we start timer counter from write_mhpmcounter path only
without checking for mcountinhibit bit. This changes adds mcountinhibit
check and also programs the counter from write_mcountinhibit as well.
When a counter is stopped using mcountinhibit we simply update
the value of the counter based on current host ticks and save
it for future reads.
We don't need to disable running timer as pmu_timer_trigger_irq
will discard the interrupt if the counter has been inhibited.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-10-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
scounteren/hcountern are also WARL registers similar to mcountern.
Only set the bits for the available counters during the write to
preserve the WARL behavior.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-9-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, if a counter monitoring cycle/instret is stopped via
mcountinhibit we just update the state while the value is saved
during the next read. This is not accurate as the read may happen
many cycles after the counter is stopped. Ideally, the read should
return the value saved when the counter is stopped.
Thus, save the value of the counter during the inhibit update
operation and return that value during the read if corresponding bit
in mcountihibit is set.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-8-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Privilege mode filtering can also be emulated for cycle/instret by
tracking host_ticks/icount during each privilege mode switch. This
patch implements that for both cycle/instret and mhpmcounters. The
first one requires Smcntrpmf while the other one requires Sscofpmf
to be enabled.
The cycle/instret are still computed using host ticks when icount
is not enabled. Otherwise, they are computed using raw icount which
is more accurate in icount mode.
Co-Developed-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-7-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the INH fields are set in mhpmevent uncoditionally
without checking if a particular priv mode is supported or not.
Suggested-by: Alistair Francis <alistair23@gmail.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-6-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU only calculates dummy cycles and instructions, so there is no
actual means to stop the icount in QEMU. Hence this patch merely adds
the functionality of accessing the cfg registers, and cause no actual
effects on the counting of cycle and instret counters.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-5-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the definitions for ISA extension smcntrpmf.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-4-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the properties for ISA extension smcntrpmf. Patches
implementing it will follow.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-3-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mhpmeventhX CSRs are available for RV32. The predicate function
should check that first before checking sscofpmf extension.
Fixes: 14664483457b ("target/riscv: Add sscofpmf extension support")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240711-smcntrpmf_v7-v8-2-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Combining riscv_cpu_set_virt_enabled() and riscv_cpu_set_mode()
functions. This is to make complete mode change information
available through a single function.
This allows to easily differentiate between HS->VS, VS->HS
and VS->VS transitions when executing state update codes.
For example: One use-case which inspired this change is
to update mode-specific instruction and cycle counters
which requires information of both prev mode and current
mode.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240711-smcntrpmf_v7-v8-1-b7c38ae7b263@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Two new regs added: ztso and zacas.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709085431.455541-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Base on the riscv-privileged spec, vstvec substitutes for the usual stvec.
Therefore, the encoding of the MODE should also be restricted to 0 and 1.
Signed-off-by: Jiayi Li <lijiayi@eswincomputing.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240701022553.1982-1-lijiayi@eswincomputing.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-11-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-10-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-9-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-8-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-7-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zama16b is the property that misaligned load/stores/atomics within
a naturally aligned 16-byte region are atomic.
According to the specification, Zama16b applies only to AMOs, loads
and stores defined in the base ISAs, and loads and stores of no more
than XLEN bits defined in the F, D, and Q extensions. Thus it should
not apply to zacas or RVC instructions.
For an instruction in that set, if all accessed bytes lie within 16B granule,
the instruction will not raise an exception for reasons of address alignment,
and the instruction will give rise to only one memory operation for the
purposes of RVWMO—i.e., it will execute atomically.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-6-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zcmop defines eight 16-bit MOP instructions named C.MOP.n, where n is
an odd integer between 1 and 15, inclusive. C.MOP.n is encoded in
the reserved encoding space corresponding to C.LUI xn, 0.
Unlike the MOPs defined in the Zimop extension, the C.MOP.n instructions
are defined to not write any register.
In current implementation, C.MOP.n only has an check function, without any
other more behavior.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Message-ID: <20240709113652.1239-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zimop extension defines an encoding space for 40 MOPs.The Zimop
extension defines 32 MOP instructions named MOP.R.n, where n is
an integer between 0 and 31, inclusive. The Zimop extension
additionally defines 8 MOP instructions named MOP.RR.n, where n
is an integer between 0 and 7.
These 40 MOPs initially are defined to simply write zero to x[rd],
but are designed to be redefined by later extensions to perform some
other action.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Message-ID: <20240709113652.1239-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix the superfluous trailing semicolon in target/hexagon/imported/mmvec/
ext.idef.
Cc: Brian Cain <bcain@quicinc.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
=cZhV
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/tcg: fixes for seg_helper.c
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
# TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
# XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
# y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
# Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
# JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
# =cZhV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 02:34:05 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386/tcg: save current task state before loading new one
target/i386/tcg: use X86Access for TSS access
target/i386/tcg: check for correct busy state before switching to a new task
target/i386/tcg: Compute MMU index once
target/i386/tcg: Introduce x86_mmu_index_{kernel_,}pl
target/i386/tcg: Reorg push/pop within seg_helper.c
target/i386/tcg: use PUSHL/PUSHW for error code
target/i386/tcg: Allow IRET from user mode to user mode with SMAP
target/i386/tcg: Remove SEG_ADDL
target/i386/tcg: fix POP to memory in long mode
hpet: fix HPET_TN_SETVAL for high 32-bits of the comparator
hpet: fix clamping of period
docs: Update description of 'user=username' for '-run-with'
qemu/timer: Add host ticks function for LoongArch
scsi: fix regression and honor bootindex again for legacy drives
hw/scsi/lsi53c895a: bump instruction limit in scripts processing to fix regression
disas: Fix build against Capstone v6
cpu: Free queued CPU work
Revert "qemu-char: do not operate on sources from finalize callbacks"
i386/sev: Don't allow automatic fallback to legacy KVM_SEV*_INIT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCGCPUOps::cpu_exec_interrupt hook is currently not mandatory; if
it is left NULL then we treat it as if it had returned false. However
since pretty much every architecture needs to handle interrupts,
almost every target we have provides the hook. The one exception is
Tricore, which doesn't currently implement the architectural
interrupt handling.
Add a "do nothing" implementation of cpu_exec_hook for Tricore,
assert on startup that the CPU does provide the hook, and remove
the runtime NULL check before calling it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240712113949.4146855-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is how the steps are ordered in the manual. EFLAGS.NT is
overwritten after the fact in the saved image.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
