The heavily imported "system/cpus.h" header includes "accel-ops.h"
to get AccelOpsClass type declaration. Reduce headers pressure by
forward declaring it in "qemu/typedefs.h", where we already
declare the AccelCPUState type.
Reduce "system/cpus.h" inclusions by only including
"system/accel-ops.h" when necessary.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-14-philmd@linaro.org>
TCGCPUOps structure makes more sense in the accelerator context
rather than hardware emulation. Move it under the accel/tcg/ scope.
Mechanical change doing:
$ sed -i -e 's,hw/core/tcg-cpu-ops.h,accel/tcg/cpu-ops.h,g' \
$(git grep -l hw/core/tcg-cpu-ops.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-11-philmd@linaro.org>
While cpu-exec.c is build for each target,tcg_flags helpers
aren't target specific. Move them to cpu-exec-common.c to
build them once.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-8-philmd@linaro.org>
These similarly named functions serve different purposes; add
docstrings to highlight them.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250116213214.5695-1-iii@linux.ibm.com>
Convert all targets simultaneously, as the gen_intermediate_code
function disappears from the target. While there are possible
workarounds, they're larger than simply performing the conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TranslationBlock flags are defined in 'exec/translation-block.h'.
tcg_cflags_has/set() use them, it is more logical to declare them in
the same place. Move them there too.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212144430.66224-2-philmd@linaro.org>
Move cpu_loop_exit_requested() declaration to "exec/cpu-common.h",
along with the related cpu_loop_exit_noexc(), cpu_loop_exit(),
cpu_loop_exit_atomic() and cpu_loop_exit_restore() methods.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241217140648.98538-1-philmd@linaro.org>
Move declarations related to TranslationBlock out of the
generic "internal-target.h" to "tb-internal.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-11-philmd@linaro.org>
log_pc() is only used within cpu-exec.c, no need to
expose it via "internal-target.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-10-philmd@linaro.org>
Move mmap_lock(), mmap_unlock() declarations and the
WITH_MMAP_LOCK_GUARD() definition to 'exec/page-protection.h'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-5-philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Use of these in helpers goes hand-in-hand with tlb_vaddr_to_host
and other probing functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCGCPUOps::cpu_exec_interrupt hook is currently not mandatory; if
it is left NULL then we treat it as if it had returned false. However
since pretty much every architecture needs to handle interrupts,
almost every target we have provides the hook. The one exception is
Tricore, which doesn't currently implement the architectural
interrupt handling.
Add a "do nothing" implementation of cpu_exec_hook for Tricore,
assert on startup that the CPU does provide the hook, and remove
the runtime NULL check before calling it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240712113949.4146855-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that all targets set TCGCPUOps::cpu_exec_halt, we can make it
mandatory and remove the fallback handling that calls cpu_has_work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The TCGCPUOps::cpu_exec_halt method is called from cpu_handle_halt()
when the CPU is halted, so that a target CPU emulation can do
anything target-specific it needs to do. (At the moment we only use
this on i386.)
The current specification of the method doesn't allow the target
specific code to do something different if the CPU is about to come
out of the halt state, because cpu_handle_halt() only determines this
after the method has returned. (If the method called cpu_has_work()
itself this would introduce a potential race if an interrupt arrived
between the target's method implementation checking and
cpu_handle_halt() repeating the check.)
Change the definition of the method so that it returns a bool to
tell cpu_handle_halt() whether to stay in halt or not.
We will want this for the Arm target, where FEAT_WFxT wants to do
some work only for the case where the CPU is in halt but about to
leave it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-2-peter.maydell@linaro.org
Record the fact that we've found a breakpoint on the page
in which a TranslationBlock is running.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not open-code cpu_loop_exit_requested().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240428214915.10339-9-philmd@linaro.org>
set_helper_retaddr() is only used in accel/tcg/user-exec.c.
clear_helper_retaddr() is only used in accel/tcg/cpu-exec.c
and accel/tcg/user-exec.c.
No need to expose their definitions to all user-emulation
files including "exec/cpu_ldst.h", move them to a new
"user-retaddr.h" header (restricted to accel/tcg/).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-19-philmd@linaro.org>
Avoid CPUArchState local variable when cpu_env() is used once.
Mechanical patch using the following Coccinelle spatch script:
@@
type CPUArchState;
identifier env;
expression cs;
@@
{
- CPUArchState *env = cpu_env(cs);
... when != env
- env
+ cpu_env(cs)
... when != env
}
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If a page table is in IO memory and lookup_tb_ptr probes
the TLB it can result in a page table walk for the instruction
fetch. If this hits IO memory and io_prepare falsely assumes
it needs to do a TLB recompile.
Avoid that by setting can_do_io at the start of lookup_tb_ptr.
Link: https://lore.kernel.org/qemu-devel/CAFEAcA_a_AyQ=Epz3_+CheAT8Crsk9mOu894wbNW_FywamkZiw@mail.gmail.com/#t
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240219173153.12114-2-Jonathan.Cameron@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move this x86-specific code out of the generic accel/tcg/.
Reported-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240124101639.30056-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to make accel/tcg/ target agnostic,
introduce the cpu_exec_halt() handler.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240124101639.30056-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is now trivial, and with inlining we can
re-use the calling function's tcg_ops variable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move this x86-specific code out of the generic accel/tcg/.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240124101639.30056-8-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to make accel/tcg/ target agnostic,
introduce the need_replay_interrupt() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20240124101639.30056-7-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert packed logic to dumb icount_exit_request() helper.
No functional change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240124101639.30056-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the manual rcu_read_(un)lock calls in cpu_exec().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240124074201.8239-2-philmd@linaro.org>
[rth: Use RCU_READ_LOCK_GUARD not WITH_RCU_READ_LOCK_GUARD]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unless I'm missing something egregious, the jmp cache is only every
populated with a valid entry by the same thread that reads the cache.
Therefore, the contents of any valid entry are always consistent and
there is no need for any acquire/release magic.
Indeed ->tb has to be accessed with atomics, because concurrent
invalidations would otherwise cause data races. But ->pc is only ever
accessed by one thread, and accesses to ->tb and ->pc within tb_lookup
can never race with another tb_lookup. While the TranslationBlock
(especially the flags) could be modified by a concurrent invalidation,
store-release and load-acquire operations on the cache entry would
not add any additional ordering beyond what you get from performing
the accesses within a single thread.
Because of this, there is really nothing to win in splitting the CF_PCREL
and !CF_PCREL paths. It is easier to just always use the ->pc field in
the jump cache.
I noticed this while working on splitting commit 8ed558ec0cb
("accel/tcg: Introduce TARGET_TB_PCREL", 2022-10-04) into multiple
pieces, for the sake of finding a more fine-grained bisection
result for https://gitlab.com/qemu-project/qemu/-/issues/2092.
It does not (and does not intend to) fix that issue; therefore
it may make sense to not commit it until the root cause
of issue #2092 is found.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240122153409.351959-1-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is causing regressions that have not been analyzed yet. Revert the
change on stable branches.
Cc: qemu-stable@nongnu.org
Cc: Michael Tokarev <mjt@tls.msk.ru>
Related: https://gitlab.com/qemu-project/qemu/-/issues/2092
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Now the VM can trigger a synchronous backdoor stopping the VM and returning to LibAFL.
- LibAFL will exit with a corresponding exit reason to perform actions accordingly (checkout the LibAFL patch for more details).
- The breakpoint mechanism has been merged with this system (not tested yet, may not work out of the box).
- The main difference with the backdoor is that it will always stop the VM.
In cpu_exec_step_atomic, we did not set CF_LAST_IO, which lead
to a loop with cpu_io_recompile.
But since 18a536f1f8 ("Always require can_do_io") we no longer
need a flag to indicate when the last insn should have can_do_io set,
so remove the flag entirely.
Reported-by: Clément Chigot <chigot@adacore.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1961
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move target-agnostic declarations from "internal-target.h"
to a new "internal-common.h" header.
monitor.c now don't include target specific headers and can
be compiled once in system_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
