In the past a single AioContext was used for block I/O and it was
fetched using blk_get_aio_context(). Nowadays the block layer supports
running I/O from any AioContext and multiple AioContexts at the same
time. Remove the dma_blk_io() AioContext argument and use the current
AioContext instead.
This makes calling the function easier and enables multiple IOThreads to
use dma_blk_io() concurrently for the same block device.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250311132616.1049687-3-stefanha@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_arch_available() is a bit simpler to understand while
reviewing than the undocumented arch_type variable.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250305005225.95051-5-philmd@linaro.org>
Both qemu_minrampagesize() and qemu_maxrampagesize() are
related to host memory backends, having the following call
stack:
qemu_minrampagesize()
-> find_min_backend_pagesize()
-> object_dynamic_cast(obj, TYPE_MEMORY_BACKEND)
qemu_maxrampagesize()
-> find_max_backend_pagesize()
-> object_dynamic_cast(obj, TYPE_MEMORY_BACKEND)
Having TYPE_MEMORY_BACKEND defined in "system/hostmem.h":
include/system/hostmem.h:23:#define TYPE_MEMORY_BACKEND "memory-backend"
Move their prototype declaration to "system/hostmem.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20250308230917.18907-7-philmd@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250311085743.21724-2-philmd@linaro.org
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Commit fc4e394b28 removed the last caller of blk_op_is_blocked(). Remove
the now unused function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250206165331.379033-1-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mostly revert commit c80cafa0c73 ("system: Add qemu_init_arch_modules")
but using target_name() instead of the target specific 'TARGET_NAME'
definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250305005225.95051-3-philmd@linaro.org>
The heavily imported "system/cpus.h" header includes "accel-ops.h"
to get AccelOpsClass type declaration. Reduce headers pressure by
forward declaring it in "qemu/typedefs.h", where we already
declare the AccelCPUState type.
Reduce "system/cpus.h" inclusions by only including
"system/accel-ops.h" when necessary.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-14-philmd@linaro.org>
Since commit 740b1759734 ("cpu-timers, icount: new modules")
we don't need to expose icount_align_option to all the
system code, we can restrict it to TCG. Since it is used as
a boolean, declare it as 'bool' type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-10-philmd@linaro.org>
Currently we handle the 'dumpdtb' machine sub-option ad-hoc in every
board model that has an FDT. It's up to the board code to make sure
it calls qemu_fdt_dumpdtb() in the right place.
This means we're inconsistent and often just ignore the user's
command line argument:
* if the board doesn't have an FDT at all
* if the board supports FDT, but there happens not to be one
present (usually because of a missing -fdt option)
This isn't very helpful because it gives the user no clue why their
option was ignored.
However, in order to support the QMP/HMP dumpdtb commands we require
now that every FDT machine stores a pointer to the FDT in
MachineState::fdt. This means we can handle -machine dumpdtb
centrally by calling the qmp_dumpdtb() function, unifying its
handling with the QMP/HMP commands. All the board code calls to
qemu_fdt_dumpdtb() can then be removed.
For this commit we retain the existing behaviour that if there
is no FDT we silently ignore the -machine dumpdtb option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Locking the memory without MCL_ONFAULT instantly prefaults any mmaped
anonymous memory with a write-fault, which introduces a lot of extra
overhead in terms of memory usage when all you want to do is to prevent
kcompactd from migrating and compacting QEMU pages. Add an option to
only lock pages lazily as they're faulted by the process by using
MCL_ONFAULT if asked.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Link: https://lore.kernel.org/r/20250212143920.1269754-5-d-tatianin@yandex-team.ru
Signed-off-by: Peter Xu <peterx@redhat.com>
Replace the boolean value enable_mlock with an enum and add a helper to
decide whether we should be calling os_mlock.
This is a stepping stone towards introducing a new mlock mode, which
will be the third possible state of this enum.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Link: https://lore.kernel.org/r/20250212143920.1269754-4-d-tatianin@yandex-team.ru
Signed-off-by: Peter Xu <peterx@redhat.com>
This will be used in the following commits to make it possible to only
lock memory on fault instead of right away.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Link: https://lore.kernel.org/r/20250212143920.1269754-2-d-tatianin@yandex-team.ru
[peterx: fail os_mlock(on_fault=1) when not supported]
[peterx: use G_GNUC_UNUSED instead of "(void)on_fault", per Dan]
Signed-off-by: Peter Xu <peterx@redhat.com>
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
=UF0n
-----END PGP SIGNATURE-----
Merge tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
# KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
# 2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
# NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
# 42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
# Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
# 87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
# =UF0n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Feb 2025 08:54:51 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu:
tests/tcg: Add late gdbstub attach test
docs/user: Document the %d placeholder and suspend=n QEMU_GDB features
gdbstub: Allow late attachment
osdep: Introduce qemu_kill_thread()
user: Introduce host_interrupt_signal
user: Introduce user/signal.h
gdbstub: Try unlinking the unix socket before binding
gdbstub: Allow the %d placeholder in the socket path
tests/qtest/migration: Pick smoke tests
tests/qtest/migration: Add --full option
Revert "util/timer: avoid deadlock when shutting down"
tests/qtest: tighten up the checks on clock_step
tests/qtest: rename qtest_send_prefix and roll-up into qtest_send
tests/qtest: simplify qtest_process_inbuf
tests/qtest: don't step clock at start of npcm7xx periodic IRQ test
tests/qtest: don't attempt to clock_step while waiting for virtio ISR
tests/docker: replicate the check-rust-tools-nightly CI job
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qtest_send_prefix never actually sent something over the chardev, all
it does is print the timestamp to the QTEST_LOG when enabled. So
rename the function, make it static, remove the unused CharDev and
simplify all the call sites by handling that directly with
qtest_send (and qtest_log_send).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-6-alex.bennee@linaro.org>
Expose the method docstring in the header, and mention
returned value must be free'd by caller.
Reported-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241111170333.43833-2-philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By changing the way the main QEMU event loop is invoked, I inadvertently
changed the BQL status of exit notifiers: some of them implicitly
assumed they would be called with the BQL held; the BQL is however
not held during the exit(status) call in qemu_default_main().
Instead of attempting to ensuring we always call exit() from the BQL -
including any transitive calls - this change adds a BQL lock guard to
qemu_run_exit_notifiers, ensuring the BQL will always be held in the
exit notifiers.
Additionally, the BQL promise is now documented at the
qemu_{add,remove}_exit_notifier() declarations.
Fixes: f5ab12caba4f ("ui & main loop: Redesign of system-specific main
thread event handling")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2771
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Since commit c4b3f46c151 ("include/exec: Move vaddr defines to
separate file") we only need to include "exec/vaddr.h" to get
the 'vaddr' type definition, no need for "exec/cpu-common.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20241217151305.29196-4-philmd@linaro.org>
Nothing requires definitions from "exec/cpu-common.h",
do not include this header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20241217151305.29196-3-philmd@linaro.org>
"exec/confidential-guest-support.h" is specific to system
emulation, so move it under the system/ namespace.
Mechanical change doing:
$ sed -i \
-e 's,exec/confidential-guest-support.h,sysemu/confidential-guest-support.h,' \
$(git grep -l exec/confidential-guest-support.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20241218155913.72288-2-philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
