This reverts commit 563b1a35ed1f1151505d4fe5f723827d1b3fd4bc.
Split debug info support is broken when cross compiling
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99973). People
that would like to use it can add it via --extra-cflags.
Reported-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want to capture potential Rust backtraces on panics in our test
logs, which isn't Rust's default behaviour. Set RUST_BACKTRACE=1 in
the add_test_setup environments, so that all our tests get run with
this environment variable set.
This makes the setting of that variable in the gitlab CI template
redundant, so we can remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250310102950.3752908-1-peter.maydell@linaro.org
Until now, FUA was always emulated with a separate flush after the write
for file-posix. The overhead of processing a second request can reduce
performance significantly for a guest disk that has disabled the write
cache, especially if the host disk is already write through, too, and
the flush isn't actually doing anything.
Advertise support for REQ_FUA in write requests and implement it for
Linux AIO and io_uring using the RWF_DSYNC flag for write requests. The
thread pool still performs a separate fdatasync() call. This can be
improved later by using the pwritev2() syscall if available.
As an example, this is how fio numbers can be improved in some scenarios
with this patch (all using virtio-blk with cache=directsync on an nvme
block device for the VM, fio with ioengine=libaio,direct=1,sync=1):
| old | with FUA support
------------------------------+---------------+-------------------
bs=4k, iodepth=1, numjobs=1 | 45.6k iops | 56.1k iops
bs=4k, iodepth=1, numjobs=16 | 183.3k iops | 236.0k iops
bs=4k, iodepth=16, numjobs=1 | 258.4k iops | 311.1k iops
However, not all scenarios are clear wins. On another slower disk I saw
little to no improvment. In fact, in two corner case scenarios, I even
observed a regression, which I however consider acceptable:
1. On slow host disks in a write through cache mode, when the guest is
using virtio-blk in a separate iothread so that polling can be
enabled, and each completion is quickly followed up with a new
request (so that polling gets it), it can happen that enabling FUA
makes things slower - the additional very fast no-op flush we used to
have gave the adaptive polling algorithm a success so that it kept
polling. Without it, we only have the slow write request, which
disables polling. This is a problem in the polling algorithm that
will be fixed later in this series.
2. With a high queue depth, it can be beneficial to have flush requests
for another reason: The optimisation in bdrv_co_flush() that flushes
only once per write generation acts as a synchronisation mechanism
that lets all requests complete at the same time. This can result in
better batching and if the disk is very fast (I only saw this with a
null_blk backend), this can make up for the overhead of the flush and
improve throughput. In theory, we could optionally introduce a
similar artificial latency in the normal completion path to achieve
the same kind of completion batching. This is not implemented in this
series.
Compatibility is not a concern for the kernel side of io_uring, it has
supported RWF_DSYNC from the start. However, io_uring_prep_writev2() is
not available before liburing 2.2.
Linux AIO started supporting it in Linux 4.13 and libaio 0.3.111. The
kernel is not a problem for any supported build platform, so it's not
necessary to add runtime checks. However, openSUSE is still stuck with
an older libaio version that would break the build.
We must detect the presence of the writev2 functions in the user space
libraries at build time to avoid build failures.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250307221634.71951-2-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
./tests/functional/test_aarch64_tcg_plugins.py needs to have plugin
libinsn built. However, it's not listed as a dependency, so meson can't
know it needs to be built.
Thus, we keep track of all plugins, and add them as an explicit
dependency.
Fixes: 4c134d07b9e ("tests: add a new set of tests to exercise plugins")
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-9-alex.bennee@linaro.org>
This option is supported by both gcc (since 4.7) and clang (since
7.0). Not only does this make the linkers job easier by reducing the
amount of ELF it needs to parse it also reduces the total build size
quite considerably. In my case a default build went from 5.8G to
3.9G (vs 1.9G for --disable-debug-info).
The --disable-split-debug option allows distros to keep all the info
together for ease of packaging.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20250306161631.2477685-1-alex.bennee@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Timers must be pinned in memory, because modify() stores a pointer to them
in the TimerList. To express this requirement, change init_full() to take
a pinned reference. Because the only way to obtain a Timer is through
Timer::new(), which is unsafe, modify() can assume that the timer it got
was later initialized; and because the initialization takes a Pin<&mut
Timer> modify() can assume that the timer is pinned. In the future the
pinning requirement will be expressed through the pin_init crate instead.
Note that Timer is a bit different from other users of Opaque, in that
it is created in Rust code rather than C code. This is why it has to
use the unsafe constructors provided by Opaque; and in fact Timer::new()
is also unsafe, because it leaves it to the caller to invoke init_full()
before modify(). Without a call to init_full(), modify() will cause a
NULL pointer dereference.
An alternative could be to combine new() + init_full() by returning a
pinned box; however, using a reference makes it easier to express
the requirement that the opaque outlives the timer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
chardev is using qio functions, so express that in the Meson internal
dependency. (I found this when adding character devices bindings for
Rust; they initially needed the io dependency added by hand).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will introduce a number of devices that are specific to the vmapple
target machine. To keep them all tidily together, let's put them into
a single target directory.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-7-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
... and also to require it (--enable-pvg). While at it, unify the dependency()
call for pvg and metal, which simplifies the logic a bit.
Note that all other Apple frameworks are either required or always-present,
therefore do not add them to the summary in the same way as PVG.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PVG is not cross-architecture; the PVG guest drivers with x86-64 macOS do not give
useful results with the aarch64 macOS host PVG framework, and vice versa.
To express this repurpose CONFIG_MAC_PVG, making it true only if the target has
the same architecture as the host. Furthermore, remove apple-gfx.m unless
one of the devices is actually present.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
v2 changelog:
- Fix Mac (and possibly some other) build issues for two patches
- os: add an ability to lock memory on_fault
- memory: pass MemTxAttrs to memory_access_is_direct()
List of features:
- William's fix on ram hole punching when with file offset
- Daniil's patchset to introduce mem-lock=on-fault
- William's hugetlb hwpoison fix for size report & remap
- David's series to allow qemu debug writes to MMIOs
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZ6zcQBIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbL3wEAqx94NpB/tEEBj6WXE3uV9LqQ0GCTYmV+
MbM51Vep8ksA/35yFn3ltM2yoSnUf9WJW6LXEEKhQlwswI0vChQERgkE
=++O1
-----END PGP SIGNATURE-----
Merge tag 'mem-next-pull-request' of https://gitlab.com/peterx/qemu into staging
Memory pull request for 10.0
v2 changelog:
- Fix Mac (and possibly some other) build issues for two patches
- os: add an ability to lock memory on_fault
- memory: pass MemTxAttrs to memory_access_is_direct()
List of features:
- William's fix on ram hole punching when with file offset
- Daniil's patchset to introduce mem-lock=on-fault
- William's hugetlb hwpoison fix for size report & remap
- David's series to allow qemu debug writes to MMIOs
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZ6zcQBIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbL3wEAqx94NpB/tEEBj6WXE3uV9LqQ0GCTYmV+
# MbM51Vep8ksA/35yFn3ltM2yoSnUf9WJW6LXEEKhQlwswI0vChQERgkE
# =++O1
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 13 Feb 2025 01:37:04 HKT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [full]
# gpg: aka "Peter Xu <peterx@redhat.com>" [full]
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'mem-next-pull-request' of https://gitlab.com/peterx/qemu:
overcommit: introduce mem-lock=on-fault
system: introduce a new MlockState enum
system/vl: extract overcommit option parsing into a helper
os: add an ability to lock memory on_fault
system/physmem: poisoned memory discard on reboot
system/physmem: handle hugetlb correctly in qemu_ram_remap()
physmem: teach cpu_memory_rw_debug() to write to more memory regions
hmp: use cpu_get_phys_page_debug() in hmp_gva2gpa()
memory: pass MemTxAttrs to memory_access_is_direct()
physmem: disallow direct access to RAM DEVICE in address_space_write_rom()
physmem: factor out direct access check into memory_region_supports_direct_access()
physmem: factor out RAM/ROMD check in memory_access_is_direct()
physmem: factor out memory_region_is_ram_device() check in memory_access_is_direct()
system/physmem: take into account fd_offset for file fallocate
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add timer bindings to help handle idiomatic Rust callbacks.
Additionally, wrap QEMUClockType in ClockType binding to avoid unsafe
calls in device code.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250210030051.2562726-7-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used in the following commits to make it possible to only
lock memory on fault instead of right away.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Link: https://lore.kernel.org/r/20250212143920.1269754-2-d-tatianin@yandex-team.ru
[peterx: fail os_mlock(on_fault=1) when not supported]
[peterx: use G_GNUC_UNUSED instead of "(void)on_fault", per Dan]
Signed-off-by: Peter Xu <peterx@redhat.com>
This replaces use of the constants from the QapiSpecialFeatures
enum, with constants from the auto-generate QapiFeatures enum
in qapi-features.h
The 'deprecated' and 'unstable' features still have a little bit of
special handling, being force defined to be the 1st + 2nd features
in the enum, regardless of whether they're used in the schema. This
retains compatibility with common code that references the features
via the QapiSpecialFeatures constants.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250205123550.2754387-5-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Imports tidied up with isort]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We deprecated i686 system mode support for qemu 8.0. However, to
make real cleanups to TCG we need to deprecate all 32-bit hosts.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For system mode, we can rarely support the amount of RAM that
the guest requires. TCG emulation is restricted to round-robin
mode, which solves many of the atomicity issues, but not those
associated with virtio. In any case, round-robin does nothing
to help the speed of emulation.
For user mode, most emulation does not succeed at all. Most
of the time we cannot even load 64-bit non-PIE binaries due
to lack of a 64-bit address space. Threads are run in
parallel, not round-robin, which means that atomicity
is not handled.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Require a 64-bit host binary to spawn a 64-bit guest.
For HVF this is trivially true because macOS 11 dropped
support for 32-bit applications entirely.
For NVMM, NetBSD only enables nvmm on x86_64:
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/dev/nvmm/Makefile?rev=1.1.6.2;content-type=text%2Fplain
For WHPX, we have already dropped support for 32-bit Windows.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Require a 64-bit host binary to spawn a 64-bit guest.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Require a 64-bit host binary to spawn a 64-bit guest.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This reverts commit dae0ec159f9 ("accel: build tcg modular").
The attempt was only enabled for x86, only modularized a small
portion of tcg, and in more than 3 years there have been no
follow-ups to improve the situation.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Without it, recent bindgen will give an error
error: extern block cannot be declared unsafe
if rustc is not new enough to support the "unsafe extern" construct.
Cc: qemu-rust@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250206111514.2134895-1-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 131c58469f6fb68c89b38fee6aba8bbb20c7f4bf)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Without it, recent bindgen will give an error
error: extern block cannot be declared unsafe
if rustc is not new enough to support the "unsafe extern" construct.
Cc: qemu-rust@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250206111514.2134895-1-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Windows uses a special mechanism to enable plugins to work (DLL delay
loading). Option for lld is different than ld.
MSYS2 clang based environment use lld by default, so restricting to this
config on Windows is safe, and will avoid false bug reports.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Tested-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250110203401.178532-4-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-26-alex.bennee@linaro.org>
This attribute is not recognized by clang.
An investigation has been performed to ensure this attribute has no
effect on layout of structures we use in QEMU [1], so it's safe to
remove now.
In the future, we'll forbid introducing new bitfields in packed struct,
as they are the one potentially impacted by this change.
[1] https://lore.kernel.org/qemu-devel/66c346de-7e20-4831-b3eb-1cda83240af9@linaro.org/
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250110203401.178532-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-24-alex.bennee@linaro.org>
Provide a way to report the process load average, via a new
'guest-get-load' command.
This is only implemented for POSIX platforms providing 'getloadavg'.
Example illustrated with qmp-shell:
(QEMU) guest-get-load
{
"return": {
"load15m": 1.546875,
"load1m": 1.669921875,
"load5m": 1.9306640625
}
}
Windows has no native equivalent API, but it would be possible to
simulate it as illustrated here (BSD-3-Clause):
https://github.com/giampaolo/psutil/pull/1485
This is left as an exercise for future contributors.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20241202121927.864335-1-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
MacOS provides a framework (library) that allows any vmm to implement a
paravirtualized 3d graphics passthrough to the host metal stack called
ParavirtualizedGraphics.Framework (PVG). The library abstracts away
almost every aspect of the paravirtualized device model and only provides
and receives callbacks on MMIO access as well as to share memory address
space between the VM and PVG.
This patch implements a QEMU device that drives PVG for the VMApple
variant of it.
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-authored-by: Alexander Graf <graf@amazon.com>
Subsequent changes:
* Cherry-pick/rebase conflict fixes, API use updates.
* Moved from hw/vmapple/ (useful outside that machine type)
* Overhaul of threading model, many thread safety improvements.
* Asynchronous rendering.
* Memory and object lifetime fixes.
* Refactoring to split generic and (vmapple) MMIO variant specific
code.
Implementation wise, most of the complexity lies in the differing threading
models of ParavirtualizedGraphics.framework, which uses libdispatch and
internal locks, versus QEMU, which heavily uses the BQL, especially during
memory-mapped device I/O. Great care has therefore been taken to prevent
deadlocks by never calling into PVG methods while holding the BQL, and
similarly never acquiring the BQL in a callback from PVG. Different strategies
have been used (libdispatch, blocking and non-blocking BHs, RCU, etc.)
depending on the specific requirements at each framework entry and exit point.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-3-phil@philjordan.eu>
[PMD: Re-ordered imported headers, style fixups]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The macOS builds in our CI (and possibly other very recent distros)
are currently broken since the update to libnfs version 6 there.
That version apparently comes with a big API breakage. v5.0.3 was
the final release of the old API (see the libnfs commit here:
https://github.com/sahlberg/libnfs/commit/4379837 ).
Disallow version 6.x for now to get the broken CI job working
again. Once somebody had enough time to adapt our code in
block/nfs.c, we can revert this change again.
Message-ID: <20241218065157.209020-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit e2d98f257138b83b6a492d1da5847a7fe0930d10)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CONFIG_DEVICES is not generated on user emulation, so
do not define it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241218151256.68625-1-philmd@linaro.org>
The macOS builds in our CI (and possibly other very recent distros)
are currently broken since the update to libnfs version 6 there.
That version apparently comes with a big API breakage. v5.0.3 was
the final release of the old API (see the libnfs commit here:
https://github.com/sahlberg/libnfs/commit/4379837 ).
Disallow version 6.x for now to get the broken CI job working
again. Once somebody had enough time to adapt our code in
block/nfs.c, we can revert this change again.
Message-ID: <20241218065157.209020-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make Cargo use unknown_lints = "allow" as well. This is more future
proof as we might add new lints to rust/Cargo.toml that are not supported
by older versions of rustc or clippy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An extra benefit of workspaces is that they allow to place lint level
settings in a single Cargo.toml; the settings are then inherited by
packages in the workspace.
Correspondingly, teach rustc_args.py to get the unexpected_cfgs
configuration from the workspace Cargo.toml.
Note that it is still possible to allow or deny warnings per crate or
module, via the #![] attribute syntax. The rust/qemu-api/src/bindings.rs
file is an example.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cargo.toml makes it possible to describe the desired lint level settings
in a nice format. We can extend this to Meson-built crates, by teaching
rustc_args.py to fetch lint and --check-cfg arguments from Cargo.toml.
--check-cfg arguments come from the unexpected_cfgs lint as well as crate
features
Start with qemu-api, since it already has a [lints.rust] table and
an invocation of rustc_args.py.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only qemu-api needs access to the symbols in config-host.h. Remove
the temptation to use them elsewhere by limiting the --cfg arguments to
the qemu-api crate.
Per-crate invocation of the script will also be needed to add --check-cfg
options for each crate's features (when more complex, build-time
configurable devices are added in the future).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, using cargo with QEMU requires copying by hand the bindings.rs to the
source tree. Instead, we can use an include file to escape the cage of cargo's
mandated source directory structure.
By running cargo within meson's "devenv" and adding a MESON_BUILD_ROOT
environment variable, it is easy for build.rs to find the file. However, the
file must be symlinked into cargo's output directory for rust-analyzer to find
it.
Suggested-by: Junjie Mao <junjie.mao@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We might have more uses for --cfg MESON, even though right now it's only
qemu-api that has generated files. Since we're going to add more flags
to the add_project_arguments calls for Rust, it makes sense to also add
--cfg MESON everywhere.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When building QEMU configure with --disable-gtk --disable-cocoa
on macOS we get:
User interface
Cocoa support : NO
SDL support : YES 2.30.5
SDL image support : NO
GTK support : NO
pixman : YES 0.42.2
VTE support : NO
PNG support : YES 1.6.43
VNC support : YES
VNC SASL support : YES
VNC JPEG support : YES 3.0.3
spice protocol support : YES 0.14.4
spice server support : NO
curses support : YES
brlapi support : NO
User defined options
cocoa : disabled
docs : disabled
gtk : disabled
../system/main.c:30:10: fatal error: 'SDL.h' file not found
30 | #include <SDL.h>
| ^~~~~~~
1 error generated.
Fix by adding the SDL dependency to main.c it's CFLAGS contains
the SDL include directory.
Fixes: 64ed6f92ff ("meson: link emulators without Makefile.target")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20241120114943.85080-1-philmd@linaro.org>
According to our support policy, we only support the two latest
major versions of macOS, and we already removed compatibility code
for older versions. However, it's still possible that people install
an older version of XCode on a recent version of macOS - which won't
be able to compile QEMU anymore, see for example the ticket here:
https://gitlab.com/qemu-project/qemu/-/issues/2694
Thus let's set the expectations right and refuse older versions of
XCode that do not match the two latest versions of macOS anymore.
Message-ID: <20241126081054.244365-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* rust: integration tests
* rust/pl011: add support for migration
* rust/pl011: add TYPE_PL011_LUMINARY device
* rust: add support for older compilers and bindgen
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcrrtIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPIBwf/W0Jo87UauGYufhEmoPvWG1EAQEqP
EzNTzem9Iw92VdiSTkAtED0/TSd8RBJOwDfjjusVXZtuMPwpRNgXaFhYTT5gFTMj
Nk3NZGaX/mbNrtdrukdx9mvUWeovytdZDZccTNkpc3oyiqY9NEz06wZ0tCNJEot6
qO3dEtKXTOQTdx2R3o0oS+2OFDGEEPxZ0PuXN3sClN4iZhGfcIDsjGAWxEh6mCDy
VxqKPdax1Ig1w7M+JMclnpOsVHwcefjHiToNPwhCEGelJ9BZilkViuvBzsVRJJz3
ptYyywBE0FT8MiKQ/wyf7U64qoizJuIgHoQnUGj98hdgvbUUiW5jcBNY3A==
=s591
-----END PGP SIGNATURE-----
Merge tag 'for-upstream-rust' of https://gitlab.com/bonzini/qemu into staging
* rust: cleanups
* rust: integration tests
* rust/pl011: add support for migration
* rust/pl011: add TYPE_PL011_LUMINARY device
* rust: add support for older compilers and bindgen
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcrrtIUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPIBwf/W0Jo87UauGYufhEmoPvWG1EAQEqP
# EzNTzem9Iw92VdiSTkAtED0/TSd8RBJOwDfjjusVXZtuMPwpRNgXaFhYTT5gFTMj
# Nk3NZGaX/mbNrtdrukdx9mvUWeovytdZDZccTNkpc3oyiqY9NEz06wZ0tCNJEot6
# qO3dEtKXTOQTdx2R3o0oS+2OFDGEEPxZ0PuXN3sClN4iZhGfcIDsjGAWxEh6mCDy
# VxqKPdax1Ig1w7M+JMclnpOsVHwcefjHiToNPwhCEGelJ9BZilkViuvBzsVRJJz3
# ptYyywBE0FT8MiKQ/wyf7U64qoizJuIgHoQnUGj98hdgvbUUiW5jcBNY3A==
# =s591
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 06 Nov 2024 18:00:50 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream-rust' of https://gitlab.com/bonzini/qemu: (39 commits)
dockerfiles: install bindgen from cargo on Ubuntu 22.04
rust: make rustfmt optional
rust: allow older version of bindgen
rust: do not use --generate-cstr
rust: allow version 1.63.0 of rustc
rust: clean up detection of the language
rust: do not use MaybeUninit::zeroed()
rust: introduce alternative implementation of offset_of!
rust: create a cargo workspace
rust: synchronize dependencies between subprojects and Cargo.lock
rust: silence unknown warnings for the sake of old compilers
rust: introduce a c_str macro
rust: use std::os::raw instead of core::ffi
rust: fix cfgs of proc-macro2 for 1.63.0
rust: patch bilge-impl to allow compilation with 1.63.0
rust/pl011: Use correct masks for IBRD and FBRD
rust/pl011: remove commented out C code
rust/pl011: add TYPE_PL011_LUMINARY device
rust/pl011: move CLK_NAME static to function scope
rust/pl011: add support for migration
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cope with the old version that is provided in Debian 12.
--size_t-is-usize is needed on bindgen <0.61.0, and it was removed in
bindgen 0.65.0, so check for it in meson.build.
--merge-extern-blocks was added in 0.61.0.
--formatter rustfmt was added in 0.65.0 and is the default, so remove it.
Apart from Debian 12 and Ubuntu 22.04, all other supported distros have
version 0.66.x of bindgen or newer (or do not have bindgen at all).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
