The default PNOR image is erased and not recognised by skiboot, so NVRAM
gets disabled. This change adds a tiny pnor file that is a proper FFS
image with a formatted NVRAM partition. This is recognised by skiboot and
will persist across machine reboots.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The bootrom is a minimal bootrom used to load an NPCM8XX image.
The source code is located in the same repo as the NPCM7XX one:
github.com/google/vbootrom/tree/master/npcm8xx.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-3-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU consumes some device tree blobs, so these have been committed
to the tree in as firmware, along with the device tree source used
to generate them. We know the blobs are "good enough" to have QEMU
boot a system, so we don't really maintain and rebuild the sources.
These blobs were generated with older 'dtc' binaries. We use the
v1.6.1 version since 2021 (commit 962fde57b7 "dtc: Update to version
1.6.1").
Since commit 6e0dc9d2a8 ("meson: compile bundled device trees"),
if dtc binary is available, it is directly used to compile the
device tree sources. New versions of 'dtc' add checks which display
warnings or errors. Our sources are a bit old, so dtc v1.6.1 now
emit the following warnings on a fresh build:
[163/3414] Generating pc-bios/canyonlands.dts with a custom command
pc-bios/canyonlands.dts:47.9-50.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
pc-bios/canyonlands.dts:210.13-429.5: Warning (unit_address_vs_reg): /plb/opb: node has a reg or ranges property, but no unit name
pc-bios/canyonlands.dts:464.26-504.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie"
pc-bios/canyonlands.dts:506.26-546.5: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie"
pc-bios/canyonlands.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
pc-bios/canyonlands.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
pc-bios/canyonlands.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
pc-bios/canyonlands.dts:268.14-289.7: Warning (avoid_unnecessary_addr_size): /plb/opb/ebc/ndfc@3,0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
[164/3414] Generating pc-bios/petalogix-s3adsp1800.dts with a custom command
pc-bios/petalogix-s3adsp1800.dts:258.33-266.5: Warning (interrupt_provider): /plb/interrupt-controller@81800000: Missing #address-cells in interrupt provider
[165/3414] Generating pc-bios/petalogix-ml605.dts with a custom command
pc-bios/petalogix-ml605.dts:234.39-241.5: Warning (interrupt_provider): /axi/interrupt-controller@81800000: Missing #address-cells in interrupt provider
[177/3414] Generating pc-bios/bamboo.dts with a custom command
pc-bios/bamboo.dts:45.9-48.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
pc-bios/bamboo.dts:87.13-154.5: Warning (unit_address_vs_reg): /plb/opb: node has a reg or ranges property, but no unit name
pc-bios/bamboo.dts:198.3-50: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
pc-bios/bamboo.dts:87.13-154.5: Warning (interrupts_property): /plb/opb: Missing interrupt-parent
pc-bios/bamboo.dts:100.14-108.6: Warning (interrupts_property): /plb/opb/ebc: Missing interrupt-parent
From QEMU perspective, these warnings are not really useful. It is
the responsibility of developers adding DT source/blob to QEMU
repository to check the source doesn't produce warnings, but as
long as the blob is useful enough, QEMU can consume it. So these
warnings don't add any value, instead they are noisy and might
distract us to focus on important warnings. Better disable them.
'dtc' provides the '--quiet' option for that [*]:
$ dtc --help
Usage: dtc [options] <input file>
Options: -[qI:O:o:V:d:R:S:p:a:fb:i:H:sW:E:@AThv]
-q, --quiet
Quiet: -q suppress warnings, -qq errors, -qqq all
Update meson to disable these unuseful DTC warnings.
[*] https://lore.kernel.org/qemu-devel/CAFEAcA-WJ9J1YQunJ+bSG=wnpxh1By+Bf18j2CyV7G0vZ=8b7g@mail.gmail.com/
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20231006064750.33852-1-philmd@linaro.org>
Since the netboot code has now been merged into the main s390-ccw.img
binary, we don't need the separate s390-netboot.img anymore. Remove
it and the code that was responsible for loading it.
Message-Id: <20240621082422.136217-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Added loongarch UEFI BIOS support to compiled scripts.
UEFI code images require 16M alignment, flash images require
16M alignment, under the loongarch architecture.This is agreed
upon when the firmware is loaded in QEMU under Loongarch.
The naming of UEFI under loongarch refers to the x86 and arm naming methods,
and the UEFI image names in x86 and arm are:
edk2-i386-code.fd
edk2-i386-vars.fd
edk2-arm-code.fd
edk2-arm-vars.fd
So on loongarch, we named it:
edk2-loongarch64-code.fd
edk2-loongarch64-vars.fd
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Message-ID: <20240724022245.1317884-1-lixianglai@loongson.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Update list of images supported in unpack_edk2_blobs to enable RISC-V
ACPI table testing.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-13-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the missing 64-bit hppa firmware blob so that it gets installed.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 7c0dfcf9395e ("target/hppa: Update SeaBIOS-hppa to version 16")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
If dtc is available, compile the .dts files in the pc-bios directory
instead of using the precompiled binaries.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.
Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and the other files.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcards are mentioned above the definition of the LINKS variable,
but then the recommendation is disattended.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-17-alex.bennee@linaro.org>
This installs VOF-related binaries (the firmware and the preformatted
NVRAM) as those were left out when the VOF was submitted initially.
Fixes: fc8c745d5015 ("spapr: Implement Open Firmware client interface")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20220208103751.1587902-1-aik@ozlabs.ru>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that all RISC-V machines can use OpenSBI BIN images, we remove
OpenSBI ELF images and also exclude these images from BIOS build.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Make pc-bios/meson.build use the files in the source tree as inputs
to bzip2.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new option rom for the multiboot loader, using DMA transfers to copy
data instead of "rep insb".
This significantly lowers QEMU's startup latency by a factor of about 40,
for example, going from 30sec to 0.8sec when loading modules of 120MB
in size.
Signed-off-by: Marcus Hähnel <marcus.haehnel@kernkonzept.com>
Signed-off-by: Adam Lackorzynski <adam@l4re.org>
[Modified to keep the non-DMA code depending on #ifdef USE_FW_CFG_DMA;
do not write below stack. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip the test if bzip2 is not available, and run it after they are
uncompressed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The edk2 firmware blobs are needed to run bios-tables-test. Unpack
them if any UEFI-enabled target is selected, so that the test can run.
This is a bit more than is actually necessary, since bios-tables-test
does not run for all UEFI-enabled targets, but it is the easiest
way to write this logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The --enable-bzip2/--disable-bzip2 configure arguments are
somehow misleading, they check for the bzip2 library, not
the bzip2 program.
We need the bzip2 program to install the EDK2 firmware blobs
(see commit 623ef637a2e "configure: Check bzip2 is available").
Check if the bzip2 program in the global meson.build to avoid
the configuration to succeed, but a later when trying to install
the firmware blobs:
../pc-bios/meson.build:5:2: ERROR: Program 'bzip2' not found
Reported-by: John Snow <jsnow@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: c8d5450bba3 ("configure: move install_blobs from configure to meson")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114174509.2944817-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Globally declare in the main meson.build:
- the list of EDK2 targets,
- whether the EDK2 blobs have to be installed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114174509.2944817-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qboot isn't a bios and shouldnt be named that way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200915120909.20838-2-kraxel@redhat.com
This is a minimalistic boot ROM written specifically for use with QEMU.
It supports loading the second-stage loader from SPI flash into RAM, SMP
boot, and not much else.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-7-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When cross-compiling, by default qemu_datadir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that sl and sv keymaps were not created by qemu-keymap.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
