The check for fp_excp_el in assert_fp_access_checked is
incorrect. For SME, with StreamingMode enabled, the access
is really against the streaming mode vectors, and access
to the normal fp registers is allowed to be disabled.
C.f. sme_enabled_check.
Convert sve_access_checked to match, even though we don't
currently check the exception state.
Cc: qemu-stable@nongnu.org
Fixes: 3d74825f4d6 ("target/arm: Add SME enablement checks")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250307190415.982049-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move ARMFPStatusFlavour to cpu.h with which to index
this array. For now, place the array in an anonymous
union with the existing structures. Adjust the order
of the existing structures to match the enum.
Simplify fpstatus_ptr() using the new array.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250129013857.135256-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For FEAT_AFP, we want to emit different code when FPCR.NEP is set, so
that instead of zeroing the high elements of a vector register when
we write the output of a scalar operation to it, we instead merge in
those elements from one of the source registers. Since this affects
the generated code, we need to put FPCR.NEP into the TBFLAGS.
FPCR.NEP is treated as 0 when in streaming SVE mode and FEAT_SME_FA64
is not implemented or not enabled; we can implement this logic in
rebuild_hflags_a64().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When FPCR.AH is 1, the behaviour of some instructions changes:
* AdvSIMD BFCVT, BFCVTN, BFCVTN2, BFMLALB, BFMLALT
* SVE BFCVT, BFCVTNT, BFMLALB, BFMLALT, BFMLSLB, BFMLSLT
* SME BFCVT, BFCVTN, BFMLAL, BFMLSL (these are all in SME2 which
QEMU does not yet implement)
* FRECPE, FRECPS, FRECPX, FRSQRTE, FRSQRTS
The behaviour change is:
* the instructions do not update the FPSR cumulative exception flags
* trapped floating point exceptions are disabled (a no-op for QEMU,
which doesn't implement FPCR.{IDE,IXE,UFE,OFE,DZE,IOE})
* rounding is always round-to-nearest-even regardless of FPCR.RMode
* denormalized inputs and outputs are always flushed to zero, as if
FPCR.{FZ,FIZ} is {1,1}
* FPCR.FZ16 is still honoured for half-precision inputs
(See the Arm ARM DDI0487L.a section A1.5.9.)
We can provide all these behaviours with another pair of float_status fields
which we use only for these insns, when FPCR.AH is 1. These float_status
fields will always have:
* flush_to_zero and flush_inputs_to_zero set for the non-F16 field
* rounding mode set to round-to-nearest-even
and so the only FPCR fields they need to honour are DN and FZ16.
In this commit we only define the new fp_status fields and give them
the required behaviour when FPSR is updated. In subsequent commits
we will arrange to use this new fp_status field for the instructions
that should be affected by FPCR.AH in this way.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We are going to need to generate different code in some cases when
FPCR.AH is 1. For example:
* Floating point neg and abs must not flip the sign bit of NaNs
* some insns (FRECPE, FRECPS, FRECPX, FRSQRTE, FRSQRTS, and various
BFCVT and BFM bfloat16 ops) need to use a different float_status
to the usual one
Encode FPCR.AH into the A64 tbflags, so we can refer to it at
translate time.
Because we now have a bit in FPCR that affects codegen, we can't mark
the AArch64 FPCR register as being SUPPRESS_TB_END any more; writes
to it will now end the TB and trigger a regeneration of hflags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Now we have moved all the uses of vfp.fp_status_f16 and FPST_FPCR_F16
to the new A32 or A64 fields, we can remove these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-19-peter.maydell@linaro.org
As the first part of splitting the existing fp_status_f16
into separate float_status fields for AArch32 and AArch64
(so that we can make FEAT_AFP control bits apply only
for AArch64), define the two new fp_status_f16_a32 and
fp_status_f16_a64 fields, but don't use them yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-14-peter.maydell@linaro.org
Now we have moved all the uses of vfp.fp_status and FPST_FPCR
to either the A32 or A64 fields, we can remove these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-13-peter.maydell@linaro.org
We want to split the existing fp_status in the Arm CPUState into
separate float_status fields for AArch32 and AArch64. (This is
because new control bits defined by FEAT_AFP only have an effect for
AArch64, not AArch32.) To make this split we will:
* define new fp_status_a32 and fp_status_a64 which have
identical behaviour to the existing fp_status
* move existing uses of fp_status to fp_status_a32 or
fp_status_a64 as appropriate
* delete the old fp_status when it has no uses left
In this patch we add the new float_status fields.
We will also need to split fp_status_f16, but we will do that
as a separate series of patches.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-7-peter.maydell@linaro.org
TB compile flags, tb_page_addr_t type, tb_cflags() and few
other methods are defined in "exec/translation-block.h".
All these files don't include "exec/translation-block.h" but
include "exec/exec-all.h" which include it. Explicitly include
"exec/translation-block.h" to be able to remove it from
"exec/exec-all.h" later when it won't be necessary. Otherwise
we'd get errors such:
accel/tcg/internal-target.h:59:20: error: a parameter list without types is only allowed in a function definition
59 | void tb_lock_page0(tb_page_addr_t);
| ^
accel/tcg/tb-hash.h:64:23: error: unknown type name 'tb_page_addr_t'
64 | uint32_t tb_hash_func(tb_page_addr_t phys_pc, vaddr pc,
| ^
accel/tcg/tcg-accel-ops.c:62:36: error: use of undeclared identifier 'CF_CLUSTER_SHIFT'
62 | cflags = cpu->cluster_index << CF_CLUSTER_SHIFT;
| ^
accel/tcg/watchpoint.c:102:47: error: use of undeclared identifier 'CF_NOIRQ'
102 | cpu->cflags_next_tb = 1 | CF_NOIRQ | curr_cflags(cpu);
| ^
target/i386/helper.c:536:28: error: use of undeclared identifier 'CF_PCREL'
536 | if (tcg_cflags_has(cs, CF_PCREL)) {
| ^
target/rx/cpu.c:51:21: error: incomplete definition of type 'struct TranslationBlock'
51 | cpu->env.pc = tb->pc;
| ~~^
system/physmem.c:2977:9: error: call to undeclared function 'tb_invalidate_phys_range'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
2977 | tb_invalidate_phys_range(addr, addr + length - 1);
| ^
plugins/api.c:96:12: error: call to undeclared function 'tb_cflags'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
96 | return tb_cflags(tcg_ctx->gen_tb) & CF_MEMI_ONLY;
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-5-philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241211163036.2297116-68-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the current implementation out of translate-neon.c,
and extend to handle all element sizes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241211163036.2297116-54-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pairwise addition with and without accumulation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241211163036.2297116-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241211163036.2297116-43-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add gvec interfaces for CNT and RBIT operations.
Use ctpop8 for CNT and revbit+bswap for RBIT.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241211163036.2297116-40-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add gvec interfaces for CLS and CLZ operations.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241211163036.2297116-38-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 4c2c0474693229c1f533239bb983495c5427784d.
This commit tried to fix a problem with our usage of MMU indexes when
EL3 is AArch32, using what it described as a "more complicated
approach" where we share the same MMU index values for Secure PL1&0
and NonSecure PL1&0. In theory this should work, but the change
didn't account for (at least) two things:
(1) The design change means we need to flush the TLBs at any point
where the CPU state flips from one to the other. We already flush
the TLB when SCR.NS is changed, but we don't flush the TLB when we
take an exception from NS PL1&0 into Mon or when we return from Mon
to NS PL1&0, and the commit didn't add any code to do that.
(2) The ATS12NS* address translate instructions allow Mon code (which
is Secure) to do a stage 1+2 page table walk for NS. I thought this
was OK because do_ats_write() does a page table walk which doesn't
use the TLBs, so because it can pass both the MMU index and also an
ARMSecuritySpace argument we can tell the table walk that we want NS
stage1+2, not S. But that means that all the code within the ptw
that needs to find e.g. the regime EL cannot do so only with an
mmu_idx -- all these functions like regime_sctlr(), regime_el(), etc
would need to pass both an mmu_idx and the security_space, so they
can tell whether this is a translation regime controlled by EL1 or
EL3 (and so whether to look at SCTLR.S or SCTLR.NS, etc).
In particular, because regime_el() wasn't updated to look at the
ARMSecuritySpace it would return 1 even when the CPU was in Monitor
mode (and the controlling EL is 3). This meant that page table walks
in Monitor mode would look at the wrong SCTLR, TCR, etc and would
generally fault when they should not.
Rather than trying to make the complicated changes needed to rescue
the design of 4c2c04746932, we revert it in order to instead take the
route that that commit describes as "the most straightforward" fix,
where we add new MMU indexes EL30_0, EL30_3, EL30_3_PAN to correspond
to "Secure PL1&0 at PL0", "Secure PL1&0 at PL1", and "Secure PL1&0 at
PL1 with PAN".
This revert will re-expose the "spurious alignment faults in
Secure PL0" issue #2326; we'll fix it again in the next commit.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241101142845.1712482-2-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
While these functions really do return a 32-bit value,
widening the return type means that we need do less
marshalling between TCG types.
Remove NeonGenNarrowEnvFn typedef; add NeonGenOne64OpEnvFn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240912024114.1097832-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240912024114.1097832-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle the two special cases within these new
functions instead of higher in the call stack.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240912024114.1097832-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our current usage of MMU indexes when EL3 is AArch32 is confused.
Architecturally, when EL3 is AArch32, all Secure code runs under the
Secure PL1&0 translation regime:
* code at EL3, which might be Mon, or SVC, or any of the
other privileged modes (PL1)
* code at EL0 (Secure PL0)
This is different from when EL3 is AArch64, in which case EL3 is its
own translation regime, and EL1 and EL0 (whether AArch32 or AArch64)
have their own regime.
We claimed to be mapping Secure PL1 to our ARMMMUIdx_EL3, but didn't
do anything special about Secure PL0, which meant it used the same
ARMMMUIdx_EL10_0 that NonSecure PL0 does. This resulted in a bug
where arm_sctlr() incorrectly picked the NonSecure SCTLR as the
controlling register when in Secure PL0, which meant we were
spuriously generating alignment faults because we were looking at the
wrong SCTLR control bits.
The use of ARMMMUIdx_EL3 for Secure PL1 also resulted in the bug that
we wouldn't honour the PAN bit for Secure PL1, because there's no
equivalent _PAN mmu index for it.
We could fix this in one of two ways:
* The most straightforward is to add new MMU indexes EL30_0,
EL30_3, EL30_3_PAN to correspond to "Secure PL1&0 at PL0",
"Secure PL1&0 at PL1", and "Secure PL1&0 at PL1 with PAN".
This matches how we use indexes for the AArch64 regimes, and
preserves propirties like being able to determine the privilege
level from an MMU index without any other information. However
it would add two MMU indexes (we can share one with ARMMMUIdx_EL3),
and we are already using 14 of the 16 the core TLB code permits.
* The more complicated approach is the one we take here. We use
the same MMU indexes (E10_0, E10_1, E10_1_PAN) for Secure PL1&0
than we do for NonSecure PL1&0. This saves on MMU indexes, but
means we need to check in some places whether we're in the
Secure PL1&0 regime or not before we interpret an MMU index.
The changes in this commit were created by auditing all the places
where we use specific ARMMMUIdx_ values, and checking whether they
needed to be changed to handle the new index value usage.
Note for potential stable backports: taking also the previous
(comment-change-only) commit might make the backport easier.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2326
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240809160430.1144805-3-peter.maydell@linaro.org
With pcrel, we cannot check the guarded page bit at translation
time, as different mappings of the same physical page may or may
not have the GP bit set.
Instead, add a couple of helpers to check the page at runtime,
after all other filters that might obviate the need for the check.
The set_btype_for_br call must be moved after the gen_a64_set_pc
call to ensure the current pc can still be computed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240802003028.795476-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have refactored the set/get functions so that the FPSCR
format is no longer the authoritative one, we can keep FPSR and FPCR
in separate CPU state fields.
As well as the get and set functions, we also have a scattering of
places in the code which directly access vfp.xregs[ARM_VFP_FPSCR] to
extract single fields which are stored there. These all change to
directly access either vfp.fpsr or vfp.fpcr, depending on the
location of the field. (Most commonly, this is the NZCV flags.)
We make the field in the CPU state struct 64 bits, because
architecturally FPSR and FPCR are 64 bits. However we leave the
types of the arguments and return values of the get/set functions as
32 bits, since we don't need to make that change with the current
architecture and various callsites would be unable to handle
set bits in the high half (for instance the gdbstub protocol
assumes they're only 32 bit registers).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-7-peter.maydell@linaro.org
We already have a gvec helper for the operations, but we aren't
using it on the aa32 neon side. Create a unified expander for
use by both aa32 and aa64 translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240528203044.612851-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This eliminates the last uses of these neon helpers.
Incorporate the MO_64 expanders as an option to the vector expander.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240528203044.612851-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the last instructions within handle_simd_3same_pair
so remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240524232121.284515-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To keep the multiple update check, replace insn_start
with insn_start_updated.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
FEAT_NV2 requires that when HCR_EL2.{NV,NV2} == 0b11 then accesses by
EL1 to certain system registers are redirected to RAM. The full list
of affected registers is in the table in rule R_CSRPQ in the Arm ARM.
The registers may be normally accessible at EL1 (like ACTLR_EL1), or
normally UNDEF at EL1 (like HCR_EL2). Some registers redirect to RAM
only when HCR_EL2.NV1 is 0, and some only when HCR_EL2.NV1 is 1;
others trap in both cases.
Add the infrastructure for identifying which registers should be
redirected and turning them into memory accesses.
This code does not set the correct syndrome or arrange for the
exception to be taken to the correct target EL if the access via
VNCR_EL2 faults; we will do that in the next commit.
Subsequent commits will mark up the relevant regdefs to set their
nv2_redirect_offset, and if relevant one of the two flags which
indicates that the redirect happens only for a particular value of
HCR_EL2.NV1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Under FEAT_NV2, when HCR_EL2.{NV,NV2} == 0b11 at EL1, accesses to the
registers SPSR_EL2, ELR_EL2, ESR_EL2, FAR_EL2 and TFSR_EL2 (which
would UNDEF without FEAT_NV or FEAT_NV2) should instead access the
equivalent EL1 registers SPSR_EL1, ELR_EL1, ESR_EL1, FAR_EL1 and
TFSR_EL1.
Because there are only five registers involved and the encoding for
the EL1 register is identical to that of the EL2 register except
that opc1 is 0, we handle this by finding the EL1 register in the
hash table and using it instead.
Note that traps that apply to direct accesses to the EL1 register,
such as active fine-grained traps or other trap bits, do not trigger
when it is accessed via the EL2 encoding in this way. However, some
traps that are defined by the EL2 register may apply. We therefore
call the EL2 register's accessfn first. The only one of the five
which has such traps is TFSR_EL2: make sure its accessfn correctly
handles both FEAT_NV (where we trap to EL2 without checking ATA bits)
and FEAT_NV2 (where we check ATA bits and then redirect to TFSR_EL1).
(We don't need the NV1 tbflag bit until the next patch, but we
introduce it here to avoid putting the NV, NV1, NV2 bits in an
odd order.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
For FEAT_NV, accesses to system registers and instructions from EL1
which would normally UNDEF there but which work in EL2 need to
instead be trapped to EL2. Detect this both for "we know this will
UNDEF at translate time" and "we found this UNDEFs at runtime", and
make the affected registers trap to EL2 instead.
The Arm ARM defines the set of registers that should trap in terms
of their names; for our implementation this would be both awkward
and inefficent as a test, so we instead trap based on the opc1
field of the sysreg. The regularity of the architectural choice
of encodings for sysregs means that in practice this captures
exactly the correct set of registers.
Regardless of how we try to define the registers this trapping
applies to, there's going to be a certain possibility of breakage
if new architectural features introduce new registers that don't
follow the current rules (FEAT_MEC is one example already visible
in the released sysreg XML, though not yet in the Arm ARM). This
approach seems to me to be straightforward and likely to require
a minimum of manual overrides.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
When FEAT_NV is turned on via the HCR_EL2.NV bit, ERET instructions
are trapped, with the same syndrome information as for the existing
FEAT_FGT fine-grained trap (in the pseudocode this is handled in
AArch64.CheckForEretTrap()).
Rename the DisasContext and tbflag bits to reflect that they are
no longer exclusively for FGT traps, and set the tbflag bit when
FEAT_NV is enabled as well as when the FGT is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
In commit be23a049 in the conversion to decodetree we broke the
decoding of the immediate value in the LDRA instruction. This should
be a 10 bit signed value that is scaled by 8, but in the conversion
we incorrectly ended up scaling it only by 2. Fix the scaling
factor.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1970
Fixes: be23a049 ("target/arm: Convert load (pointer auth) insns to decodetree")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231106113445.1163063-1-peter.maydell@linaro.org
The feature test functions isar_feature_*() now take up nearly
a thousand lines in target/arm/cpu.h. This header file is included
by a lot of source files, most of which don't need these functions.
Move the feature test functions to their own header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-2-peter.maydell@linaro.org
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently the only tag-setting instructions always do so in the
context of the current EL, and so we only need one ATA bit in the TB
flags. The FEAT_MOPS SETG instructions include ones which set tags
for a non-privileged access, so we now also need the equivalent "are
tags enabled?" information for EL0.
Add the new TB flag, and convert the existing 'bool ata' field in
DisasContext to a 'bool ata[2]' that can be indexed by the is_unpriv
bit in an instruction, similarly to mte[2].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-9-peter.maydell@linaro.org
Previously we hard-coded the blocksize with GMID_EL1_BS.
But the value we choose for -cpu max does not match the
value that cortex-a710 uses.
Mirror the way we handle dcz_blocksize.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230811214031.171020-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we don't require 16-byte atomicity here, using a single larger
operation simplifies the code. Introduce finalize_memop_asimd for this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let finalize_memop_atom be the new basic function, with
finalize_memop and finalize_memop_pair testing FEAT_LSE2
to apply the appropriate atomicity.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This had been pulled in via exec/translator.h,
but the include of exec-all.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
