decode_bytes reads 1, 2, 4, or 8 bytes at a time. The destination
variable should therefore be a uint64_t, not a target_ulong.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Fixes: ff2de1668c9 ("i386: hvf: remove addr_t")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241209203629.74436-9-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
AccelCPUClass is for accelerator to initialize target specific
features of a vCPU. Not really related to hardware emulation,
rename "hw/core/accel-cpu.h" as "accel/accel-cpu-target.h"
(using the explicit -target suffix).
More importantly, target specific header often access the
target specific definitions which are in each target/FOO/cpu.h
header, usually included generically as "cpu.h" relative to
target/FOO/. However, there is already a "cpu.h" in hw/core/
which takes precedence. This change allows "accel-cpu-target.h"
to include a target "cpu.h".
Mechanical change doing:
$ git mv include/hw/core/accel-cpu.h \
include/accel/accel-cpu-target.h
$ sed -i -e 's,hw/core/accel-cpu.h,accel/accel-cpu-target.h,' \
$(git grep -l hw/core/accel-cpu.h)
and renaming header guard 'ACCEL_CPU_TARGET_H'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-12-philmd@linaro.org>
This requires making raise_exception non-static. That function needs to be
renamed to avoid clashing with a function in TCG.
Mostly code movement. No functional change.
Signed-off-by: Wei Liu <liuwe@linux.microsoft.com>
Link: https://lore.kernel.org/r/1740126987-8483-12-git-send-email-liuwe@linux.microsoft.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the code to rely on the segment definition for checking cs.db.
This allows removing HVF specific VMX related definition from the
decoder.
Introduce a function for retrieving the CS descriptor.
No functional change intended.
Signed-off-by: Wei Liu <liuwe@linux.microsoft.com>
Link: https://lore.kernel.org/r/1740126987-8483-4-git-send-email-liuwe@linux.microsoft.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a conflicting declaration for hvf_handle_io in x86_emu.c. The type of
the first argument is wrong. There has never been a problem because the first
argument is not used in hvf_handle_io.
That being said, the code shouldn't contain such an error. Use the proper
declaration from hvf-i386.h.
Take the chance to change the first argument's type to be CPUState.
Signed-off-by: Wei Liu <liuwe@linux.microsoft.com>
Link: https://lore.kernel.org/r/1740126987-8483-3-git-send-email-liuwe@linux.microsoft.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are duplicated code to setup the value of MSR_CORE_THREAD_COUNT.
Extract a common function for it.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20241219110125.1266461-2-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Hvf on x86 only supported 2MiB large pages, but never bothered to strip
out the 1GiB page size capability from -cpu host. With QEMU 8.0.0 this
became a problem because OVMF started to use 1GiB pages by default.
Let's just unconditionally add 1GiB page walk support to the walker.
With this fix applied, I can successfully run OVMF again.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1603
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reported-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20230420225258.58009-1-agraf@csgraf.de
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pointers to the x86 CPU state already exist at the function scope,
no need to re-obtain them in individual exit reason cases.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-6-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When setting the APICBASE MSR to an illegal value, the APIC
implementation will return an error. This change forwards that report
to the guest as an exception rather than ignoring it when using the hvf
accelerator.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-5-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hvf_caps data structure only exists once as part of the hvf accelerator
state, but it is initialised during vCPU initialisation. This change therefore
adds a check to ensure memory for it is only allocated once.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-4-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The handling for CPUID function 0xD (supported XSAVE features) was
improved in a recent patch. Unfortunately, this appears to have
introduced undefined behaviour for cases where ecx > 30, as the result
of (1 << idx) is undefined if idx > 30.
Per Intel SDM section 13.2, the behaviour for ecx values up to and
including 62 are specified. This change therefore specifically sets
all registers returned by the CPUID instruction to 0 for 63 and higher.
Furthermore, the bit shift uses uint64_t, where behaviour for the entire
range of 2..62 is safe and correct.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-3-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support for x2APIC mode was recently introduced in the software emulated
APIC implementation for TCG. Enabling it when using macOS’s hvf
accelerator is useful and significantly helps performance, as Qemu
currently uses the emulated APIC when running on hvf as well.
This change wires up the read & write operations for the MSR VM exits
and allow-lists the CPUID flag in the x86 hvf runtime.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241105155800.5461-2-phil@philjordan.eu
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
../target/i386/hvf/x86_cpuid.c:35:28: error: a function declaration without a prototype is deprecated in all versions of C
Fixes: 7cac7aa7040a823c585f1578a38f28e83c8bf3e1
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Link: https://lore.kernel.org/r/20241104222102.1522688-1-pierrick.bouvier@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The call to xgetbv() is passing the ecx value for cpuid function 0xD,
index 0. The xgetbv call thus returns false (OSXSAVE is bit 27, which is
well out of the range of CPUID[0xD,0].ECX) and eax is not modified. While
fixing it, cache the whole computation of supported XCR0 bits since it
will be used for more than just CPUID leaf 0xD.
Furthermore, unsupported subleafs of CPUID 0xD (including all those
corresponding to zero bits in host's XCR0) must be hidden; if OSXSAVE
is not set at all, the whole of CPUID leaf 0xD plus the XSAVE bit must
be hidden.
Finally, unconditionally drop XSTATE_BNDREGS_MASK and XSTATE_BNDCSR_MASK;
real hardware will only show them if the MPX bit is set in CPUID;
this is never the case for hvf_get_supported_cpuid() because QEMU's
Hypervisor.framework support does not handle the VMX fields related to
MPX (even in the unlikely possibility that the host has MPX enabled).
So hide those bits in the new cache_host_xcr0().
Cc: Phil Dennis-Jordan <lists@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is preliminary work to split up hv_vm_create
logic per platform so we can support creating VMs
with > 64GB of RAM on Apple Silicon machines. This
is done via ARM HVF's hv_vm_config_create() (and
other APIs that modify this config that will be
coming in future patches). This should have no
behavioral difference at all as hv_vm_config_create()
just assigns the same default values as if you just
passed NULL to the function.
Signed-off-by: Danny Canter <danny_canter@apple.com>
Message-id: 20240828111552.93482-3-danny_canter@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
macOS versions older than 12.0 are no longer supported.
docs/about/build-platforms.rst says:
> Support for the previous major version will be dropped 2 years after
> the new major version is released or when the vendor itself drops
> support, whichever comes first.
macOS 12.0 was released 2021:
https://www.apple.com/newsroom/2021/10/macos-monterey-is-now-available/
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240629-macos-v1-1-6e70a6b700a0@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
macOS 10.15 introduced the more efficient hv_vcpu_run_until() function
to supersede hv_vcpu_run(). According to the documentation, there is no
longer any reason to use the latter on modern host OS versions, especially
after 11.0 added support for an indefinite deadline.
Observed behaviour of the newer function is that as documented, it exits
much less frequently - and most of the original function’s exits seem to
have been effectively pointless.
Another reason to use the new function is that it is a prerequisite for
using newer features such as in-kernel APIC support. (Not covered by
this patch.)
This change implements the upgrade by selecting one of three code paths
at compile time: two static code paths for the new and old functions
respectively, when building for targets where the new function is either
not available, or where the built executable won’t run on older
platforms lacking the new function anyway. The third code path selects
dynamically based on runtime detected availability of the weakly-linked
symbol.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20240605112556.43193-7-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When interrupting a vCPU thread, this patch actually tells the hypervisor to
stop running guest code on that vCPU.
Calling hv_vcpu_interrupt actually forces a vCPU exit, analogously to
hv_vcpus_exit on aarch64. Alternatively, if the vCPU thread
is not
running the VM, it will immediately cause an exit when it attempts
to do so.
Previously, hvf_kick_vcpu_thread relied upon hv_vcpu_run returning very
frequently, including many spurious exits, which made it less of a problem that
nothing was actively done to stop the vCPU thread running guest code.
The newer, more efficient hv_vcpu_run_until exits much more rarely, so a true
"kick" is needed before switching to that.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20240605112556.43193-6-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using x86 macOS Hypervisor.framework as accelerator, detection of
dirty memory regions is implemented by marking logged memory region
slots as read-only in the EPT, then setting the dirty flag when a
guest write causes a fault. The area marked dirty should then be marked
writable in order for subsequent writes to succeed without a VM exit.
However, dirty bits are tracked on a per-page basis, whereas the fault
handler was marking the whole logged memory region as writable. This
change fixes the fault handler so only the protection of the single
faulting page is marked as dirty.
(Note: the dirty page tracking appeared to work despite this error
because HVF’s hv_vcpu_run() function generated unnecessary EPT fault
exits, which ended up causing the dirty marking handler to run even
when the memory region had been marked RW. When using
hv_vcpu_run_until(), a change planned for a subsequent commit, these
spurious exits no longer occur, so dirty memory tracking malfunctions.)
Additionally, the dirty page is set to permit code execution, the same
as all other guest memory; changing memory protection from RX to RW not
RWX appears to have been an oversight.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-5-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A bunch of function definitions used empty parentheses instead of (void) syntax, yielding the following warning when building with clang on macOS:
warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes]
In addition to fixing these function headers, it also fixes what appears to be a typo causing a variable to be unused after initialisation.
warning: variable 'entry_ctls' set but not used [-Wunused-but-set-variable]
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-3-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the INVTSC bit to the Hypervisor.framework accelerator's
CPUID bit passthrough allow-list. Previously, specifying +invtsc in the CPU
configuration would fail with the following warning despite the host CPU
advertising the feature:
qemu-system-x86_64: warning: host doesn't support requested feature:
CPUID.80000007H:EDX.invtsc [bit 8]
x86 macOS itself relies on a fixed rate TSC for its own Mach absolute time
timestamp mechanism, so there's no reason we can't enable this bit for guests.
When the feature is enabled, a migration blocker is installed.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-2-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HVF has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-4-philmd@linaro.org>
See previous commit and commit 9de9fa5cf2 ("Avoid using inlined
functions with external linkage") for rationale.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240313184954.42513-3-philmd@linaro.org>
QEMU coding style recommend using structure typedefs:
https://www.qemu.org/docs/master/devel/style.html#typedefs
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240129164514.73104-14-philmd@linaro.org>
[thuth: Break long lines to avoid checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a variable is initialized to &struct->field, use it
in place. Rationale: while this makes the code more concise,
this also helps static analyzers.
Mechanical change using the following Coccinelle spatch script:
@@
type S, F;
identifier s, m, v;
@@
S *s;
...
F *v = &s->m;
<+...
- &s->m
+ v
...+>
Inspired-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-2-philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Follow the naming used by other files in target/i386/.
No functional changes.
Suggested-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231020111136.44401-4-philmd@linaro.org>
Follow the naming used by other files in target/i386/.
No functional changes.
Suggested-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231020111136.44401-3-philmd@linaro.org>
Follow C style guidelines and use CPUState forward
declaration from "qemu/typedefs.h".
No functional changes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231020111136.44401-2-philmd@linaro.org>
When CPUArchState* is available (here CPUX86State*), we can
use the fast env_archcpu() macro to get ArchCPU* (here X86CPU*).
The QOM cast X86_CPU() macro will be slower when building with
--enable-qom-cast-debug.
Pass CPUX86State* as argument to simulate_rdmsr / simulate_wrmsr
instead of a CPUState* to avoid an extra cast.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231009110239.66778-7-philmd@linaro.org>
We already have 'x86_cpu = X86_CPU(cpu)'. Use the variable
instead of doing another QOM cast with X86_CPU().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231009110239.66778-6-philmd@linaro.org>
hvf_get_supported_cpuid() is only defined for x86 targets
(in target/i386/hvf/x86_cpuid.c).
Its declaration is pointless on all other targets.
All the calls to it in target/i386/cpu.c are guarded by
a call on hvf_enabled(), so are elided when HVF is not
built in. Therefore we can remove the unnecessary function
stub.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004092510.39498-3-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only non standard type -- CPUArchState -- is forward
declared in "qemu/typedefs.h", so no particular header is
required here.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20231004092510.39498-2-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AccelCPUClass::cpu_realizefn handler is meant for target
specific code, rename it using '_target_' to emphasis it.
Suggested-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231003123026.99229-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changes the signature of the target-defined functions for
inserting/removing hvf hw breakpoints. The address and length arguments
are now of vaddr type, which both matches the type used internally in
accel/hvf/hvf-all.c and makes the api target-agnostic.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-5-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState.
Rename the 'hvf_vcpu_state' structure as 'AccelCPUState'.
Use the generic 'accel' field of CPUState instead of 'hvf'.
Replace g_malloc0() by g_new0() for readability.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230624174121.11508-17-philmd@linaro.org>
Most of the codebase uses 'CPUState *cpu' or 'CPUState *cs'.
While 'cpu_state' is kind of explicit, it makes the code
harder to review. Simply rename as 'cs'.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230624174121.11508-16-philmd@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Guests can now be debugged through the gdbstub. Support is added for
single-stepping, software breakpoints, hardware breakpoints and
watchpoints. The code has been structured like the KVM counterpart.
While guest debugging is enabled, the guest can still read and write the
DBG*_EL1 registers but they don't have any effect.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-5-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Required for guest debugging. The code has been structured like the KVM
counterpart.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-4-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NEED_CPU_H is always defined for these target-specific headers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221216220158.6317-2-philmd@linaro.org>
Pass through RDPID and RDTSCP support in CPUID if host supports it.
Correctly detect if CPU_BASED_TSC_OFFSET and CPU_BASED2_RDTSCP would
be supported in primary and secondary processor-based VM-execution
controls. Enable RDTSCP in secondary processor controls if RDTSCP
support is indicated in CPUID.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <20220214185605.28087-7-f4bug@amsat.org>
Tested-by: Silvio Moioli <moio@suse.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1011
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'. Standardize on the
latter.
Change produced with:
sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)
and then hand-undoing the instance in linux-headers/linux/kvm.h.
Most of these changes are in comments or documentation; the
exceptions are:
* a local variable in accel/hvf/hvf-accel-ops.c
* a local variable in accel/kvm/kvm-all.c
* the PMCR_WRITABLE_MASK macro in target/arm/internals.h
* the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
(which is never used anywhere)
* the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
(which is never used anywhere)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
When building on macOS 11 [*], we get:
In file included from ../target/i386/hvf/hvf.c:59:
../target/i386/hvf/vmx.h:174:5: error: 'hv_vcpu_flush' is deprecated: first deprecated in macOS 11.0 - This API has no effect and always returns HV_UNSUPPORTED [-Werror,-Wdeprecated-declarations]
hv_vcpu_flush(vcpu);
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/Hypervisor.framework/Headers/hv.h:364:20: note: 'hv_vcpu_flush' has been explicitly marked deprecated here
extern hv_return_t hv_vcpu_flush(hv_vcpuid_t vcpu)
^
Since this call "has no effect", simply remove it ¯\_(ツ)_/¯
Not very useful deprecation doc:
https://developer.apple.com/documentation/hypervisor/1441386-hv_vcpu_flush
[*] Also 10.15 (Catalina):
https://lore.kernel.org/qemu-devel/Yd3DmSqZ1SiJwd7P@roolebo.dev/
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
