When the cpu is created, qemu_add_vm_change_state_handler
is called in the kvm_arch_init_vcpu function to create
the VMChangeStateEntry resource.
However, the resource is not released when the cpu is destroyed.
This results in a qemu process segment error when the virtual
machine restarts after the cpu is unplugged.
This patch solves the problem by adding the corresponding resource
release process to the kvm_arch_destroy_vcpu function.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20250324123328.518076-1-lixianglai@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In expression 1ULL << tlb_ps, left shifting by more than 63 bits has
undefined behavior. The shift amount, tlb_ps, is as much as 64. check
"tlb_ps >=64" to fix.
Resolves: Coverity CID 1593475
Fixes: d882c284a3 ("target/loongarch: check tlb_ps")
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Temporary variable ret is assigned at last line and return, it can
be removed and return directly.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250320032158.1762751-6-maobibo@loongson.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For some paravirt KVM features, if user forces to enable it however
KVM does not support, qemu should fail to run and exit immediately,
rather than continue to run. Here set error message and return directly
in function kvm_arch_init_vcpu().
Fixes: 6edd2a9bec90 (target/loongarch/kvm: Implement LoongArch PMU extension)
Fixes: 936c3f4d7916 (target/loongarch: Use auto method with LSX feature)
Fixes: 5e360dabedb1 (target/loongarch: Use auto method with LASX feature)
Fixes: 620d9bd0022e (target/loongarch: Add paravirt ipi feature detection)
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250320032158.1762751-2-maobibo@loongson.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-11-philmd@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20241114011310.3615-19-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241114011310.3615-18-philmd@linaro.org>
For LoongArch th min tlb_ps is 12(4KB), for TLB code,
the tlb_ps may be 0,this may case UndefinedBehavior
Add a check-tlb_ps fuction to check tlb_ps,
to make sure the tlb_ps is avalablie. we check tlb_ps
when get the tlb_ps from tlb->misc or CSR bits.
1. cpu reset
set CSR_PWCL.PTBASE and CSR_STLBPS.PS bits a default value
from CSR_PRCFG2;
2. tlb instructions.
some tlb instructions get the tlb_ps from tlb->misc but the
value may has been initialized to 0. we need just check the tlb_ps
skip the function and write a guest log.
3. csrwr instructions.
to make sure CSR_PWCL.PTBASE and CSR_STLBPS.PS bits are avalable,
cheke theses bits and set a default value from CSR_PRCFG2.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20250305063311.830674-3-gaosong@loongson.cn>
some tlb instructions get the tlb_ps from tlb->misc but the
value may has been initialized to 0,just check the tlb_ps skip
the function and write a log.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20250305063311.830674-2-gaosong@loongson.cn>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field for little-endian targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-2-philmd@linaro.org>
TCGCPUOps structure makes more sense in the accelerator context
rather than hardware emulation. Move it under the accel/tcg/ scope.
Mechanical change doing:
$ sed -i -e 's,hw/core/tcg-cpu-ops.h,accel/tcg/cpu-ops.h,g' \
$(git grep -l hw/core/tcg-cpu-ops.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-11-philmd@linaro.org>
The commit 5a99a10da6cf ("target/loongarch: fix vcpu reset command word issue")
fixes the error in the cpu reset ioctl command word delivery process,
so that the command word can be delivered correctly, and adds the judgment
and processing of the error return value, which exposes another problem that
under loongarch, the cpu reset action is earlier than the creation of vcpu.
An error occurs when the cpu reset command is sent.
Now adjust the order of cpu reset and vcpu create actions to fix this problem
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Implement cpu plug interface, and cold-plug cpu uses plug interface
when cpu object is created.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Add basic cpu hotplug interface framework, cpu hotplug interface is
stub function and only framework is added here.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Add some properties such as socket_id, core_id, thread_id and node_id
on LoongArch CPU object.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Add topological relationships for Loongarch VCPU and initialize
topology member variables.
On LoongArch system there is socket/core/thread topo information,
physical CPU id is calculated from CPU topo, every topo sub-field is
aligned by power of 2. So it is different from logical cpu index.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Feature virtual extioi is loongArch virt machine property rather than
vCPU property in qemu side. However it is vCPU property in KVM kernel
side, here add loongArch virt machine property checking and enable virt
extioi feature when vCPU is created.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Paravirt steal time feature is OnOffAuto type, feature detection is added
to check whether it is supported on KVM host.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Property kvm-steal-time is added for kvm steal time feature, it is
specially for kvm mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
The similiar with cpucfg register, paravirt ipi feature is set in
function kvm_arch_put_registers(). Instead the paravirt feature can
be enabled only once, it cannot be changed dynamically.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Paravirt ipi feature is OnOffAuto type, feature detection is added
to check whether it is supported by KVM host.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Property kvm-pv-ipi is added to paravirt ipi feature, it is specially
for kvm mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
LBT and PMU feature is supported only in kvm mode, move property
about these two features to function kvm_loongarch_cpu_post_init().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Some features such as LBT and PMU are implemented in kvm mode,
With paravirt features in future, post init function is added
for kvm mode, so that property for these features will be created
in kvm post init function.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
On 3A5000 system, the physical address space width for host is 48,
however 47 bit for KVM VM. For KVM VM, size of physical address space is
the same with that of virtual user space address.
Here modify physical address space width with 47 bit in KVM mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Write operation with R32 (orig_a0) and R34 (CSR_BADV) is discarded on
gdbstub implementation for LoongArch system. And return value should
be register size rather than 0, since it is used to calculate offset of
next register such as R33 (PC) in function handle_write_all_regs().
Cc: qemu-stable@nongnu.org
Fixes: ca61e75071c6 ("target/loongarch: Add gdb support.")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
When the KVM_REG_LOONGARCH_VCPU_RESET command word
is sent to the kernel through the kvm_set_one_reg interface,
the parameter source needs to be a legal address,
otherwise the kernel will return an error and the command word
will fail to be sent.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
DisasContextBase.pc_next has type vaddr; use the correct log format.
Fixes: 85c19af63e7 ("include/exec: Use vaddr in DisasContextBase for virtual addresses")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Field ipistate in LoongArch CPU object is not used any more,
remove it here.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
This is now handled by the configs/targets/*.mak fragment.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On LA464, some CSR registers are not used such as CSR_SAVE8 -
CSR_SAVE15, also CSR registers relative with MCE is not used now.
Flag CSRFL_UNUSED is added for these registers, so that it will
not dumped. In order to keep compatiblity, these CSR registers are
not removed since it is used in vmstate already.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Common source file csr.c is added here, it can be used by both
TCG mode and kvm mode. The common code is removed from file
tcg/insn_trans/trans_privileged.c.inc to csrc.c
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Parameter type TCGv and TCGv_ptr for function GenCSRRead and GenCSRWrite
is not used in non-TCG mode. Generic csr function type is added here
with parameter void type, so that it passes to compile with non-TCG mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
With CSR register, dynamic function access is used for CSR register
access in TCG mode, so that csr info can be used by other modules.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
When dump memory content with gva address, software page table walker is
necessary to get responding gpa address.
Here page table walker is added for debugger usage.
Signed-off-by: Miao Hao <haomiao23s@ict.ac.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
iFrom LoongArch Reference Manual pte width can be 64bit, 128bit
or more. Instead real hardware only supports 64bit pte width.
For 12bit pte, there is no detail definition for all 128bit
from manual.
Here only 64bit pte width is supported for simplicity, will add
this in later if real hw support it and there is definition for
all the bits from manual.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Like LSX feature, add type OnOffAuto for LASX feature setting.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Like LBT feature, add type OnOffAuto for LSX feature setting. Also
add LSX feature detection with new VM ioctl command, fallback to old
method if it is not supported.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Hardcoded 32 bytes is used for vbsrl emulation check, there is
problem when options lsx=on,lasx=off is used for vbsrl.v instruction
in TCG mode. It injects LASX exception rather LSX exception.
Here actual operand size is used.
Cc: qemu-stable@nongnu.org
Fixes: df97f338076 ("target/loongarch: Implement xvreplve xvinsve0 xvpickve")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Refer to the link below for a description of the vldi instructions:
https://jia.je/unofficial-loongarch-intrinsics-guide/lsx/misc/#synopsis_88
Fixed errors in vldi instruction implementation.
Signed-off-by: Guo Hongyu <guohongyu24@mails.ucas.ac.cn>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Convert all targets simultaneously, as the gen_intermediate_code
function disappears from the target. While there are possible
workarounds, they're larger than simply performing the conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TranslationBlock flags are defined in 'exec/translation-block.h'.
tcg_cflags_has/set() use them, it is more logical to declare them in
the same place. Move them there too.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212144430.66224-2-philmd@linaro.org>
