When update_pagemask was split from helper_mtc0_pagemask,
we failed to actually write to the new parameter but continue
to write to env->CP0_PageMask. Thus the use within
page_table_walk_refill modifies cpu state and not the local
variable as expected.
Simplify by renaming to compute_pagemask and returning the
value directly. No need for either env or pointer return.
Fixes: 074cfcb4dae ("target/mips: Implement hardware page table walker for MIPS32")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250328175526.368121-4-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: qemu-stable@nongnu.org
The number of bits set in PageMask must be even.
Fixes: d40b55bc1b86 ("target/mips: Fix PageMask with variable page size")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250328175526.368121-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: qemu-stable@nongnu.org
Revert ee3863b9d41 and a08d60bc6c2b. The logic behind changing
the system page size because of what the Loongson kernel "prefers"
is flawed.
In the Loongson-2E manual, section 5.5, it is clear that the cpu
supports a 4k page size (along with many others). Similarly for
the Loongson-3 series CPUs, the 4k page size is mentioned in the
section 7.7 (PageMask Register). Therefore we must continue to
support a 4k page size.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250328175526.368121-2-richard.henderson@linaro.org>
[PMD: Mention Loongson-3 series CPUs]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20241114011310.3615-19-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241114011310.3615-18-philmd@linaro.org>
Fix possible overflow in 1 << (DF_BITS(df) - 2) when DF_BITS(df)
is 64 by using a 64-bit integer for the shift operation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reported-by: Dmitriy Fedin <d.fedin@fobos-nt.ru>
Signed-off-by: Denis Rastyogin <gerben@altlinux.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20250124122707.54264-1-gerben@altlinux.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
DisasContextBase.pc_next has type vaddr; use the correct log format.
Fixes: 85c19af63e7 ("include/exec: Use vaddr in DisasContextBase for virtual addresses")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Per [*]:
"we're only interested in adopting SPDX for recording the
licensing info, [not] any other SPDX metadata."
Replace the 'SPDX-FileCopyrightText' and 'SPDX-FileContributor'
tags added by Linaro by 'Copyright (c)' and 'Authors' words
respectively.
[*] https://lore.kernel.org/qemu-devel/20241007154548.1144961-4-berrange@redhat.com/
Inspired-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Our float_flag_output_denormal exception flag is set when
the fpu code flushes an output denormal to zero. Rename
it to float_flag_output_denormal_flushed:
* this keeps it parallel with the flag for flushing
input denormals, which we just renamed
* it makes it clearer that it doesn't mean "set when
the output is a denormal"
Commit created with
for f in `git grep -l float_flag_output_denormal`; do sed -i -e 's/float_flag_output_denormal/float_flag_output_denormal_flushed/' $f; done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-21-peter.maydell@linaro.org
Our float_flag_input_denormal exception flag is set when the fpu code
flushes an input denormal to zero. This is what many guest
architectures (eg classic Arm behaviour) require, but it is not the
only donarmal-related reason we might want to set an exception flag.
The x86 behaviour (which we do not currently model correctly) wants
to see an exception flag when a denormal input is *not* flushed to
zero and is actually used in an arithmetic operation. Arm's FEAT_AFP
also wants these semantics.
Rename float_flag_input_denormal to float_flag_input_denormal_flushed
to make it clearer when it is set and to allow us to add a new
float_flag_input_denormal_used next to it for the x86/FEAT_AFP
semantics.
Commit created with
for f in `git grep -l float_flag_input_denormal`; do sed -i -e 's/float_flag_input_denormal/float_flag_input_denormal_flushed/' $f; done
and manual editing of softfloat-types.h and softfloat.c to clean
up the indentation afterwards and to fix a comment which wasn't
using the full name of the flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-20-peter.maydell@linaro.org
Convert all targets simultaneously, as the gen_intermediate_code
function disappears from the target. While there are possible
workarounds, they're larger than simply performing the conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation of heterogeneous emulation where cores with
different endianness can run concurrently, we need to remove
the tswap() calls -- which use a fixed per-binary endianness.
Get the endianness of the UHI CPU accessed using
mips_env_is_bigendian() and replace the tswap() calls
by bswap() ones when necessary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241211230357.97036-3-philmd@linaro.org>
The TranslationBlock flags are defined in 'exec/translation-block.h'.
tcg_cflags_has/set() use them, it is more logical to declare them in
the same place. Move them there too.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212144430.66224-2-philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Similarly to commit 17c2c320f3c ("Introduce ase_mt_available helper"),
introduce the disas_mt_available() one which takes a DisasContext
argument to determine whether Multi-Threading is available by
checking the MT bit of the CP0_Config3 register.
Remove the then unused ASE_MT definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241024195447.44600-1-philmd@linaro.org>
Determine if the MIPS-3D ASE is implemented by checking
the state of the 3D bit in the FIR CP1 control register.
Remove the then unused ASE_MIPS3D definition.
Note, this allows using MIPS-3D on the mips64dspr2 model.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241021145832.34920-1-philmd@linaro.org>
Loongson fixed-point multiplies and divisions opcodes are
specific to 64-bit cores (Loongson-2 and Loongson-3 families).
Simplify by removing the 32-bit checks.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20241026175349.84523-10-philmd@linaro.org>
Convert the following opcodes to decodetree:
- MULT.G - multiply 32-bit signed integers
- MULTU.G - multiply 32-bit unsigned integers
- DMULT.G - multiply 64-bit signed integers
- DMULTU.G - multiply 64-bit unsigned integers
Now that all opcodes from the extension have been converted, we
can remove completely gen_loongson_integer() and its 2 calls in
decode_opc_special2_legacy() and decode_opc_special3_legacy().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241026175349.84523-9-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the following opcodes to decodetree:
- MOD.G - mod 32-bit signed integers
- MODU.G - mod 32-bit unsigned integers
- DMOD.G - mod 64-bit signed integers
- DMODU.G - mod 64-bit unsigned integers
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20241026175349.84523-8-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
DIV.G and DDIV.G are very similar. Provide gen_lext_DIV_G() a
'is_double' argument so it can generate DIV.G (divide 32-bit
signed integers).
With this commit we explicit the template used to generate
opcode for 32/64-bit word variants. Next commits will be less
verbose by providing both variants at once.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20241026175349.84523-6-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Introduce decode_loongson() to decode all Loongson vendor
specific opcodes. Start converting a single opcode: DDIV.G
(divide 64-bit signed integers).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20241026175349.84523-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There is no issue having multiple enum declarations with
the same value. As we are going to remove the OPC_MULT_G_2E
definition in few commits, restore the OPC_ADDUH_QB_DSP and
OPC_MUL_PH_DSP definitions and use them where they belong.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241026175349.84523-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since MULTU opcodes don't record the most significant bits
of the infinite result, sign-extending the sources make no
difference in the result.
Once we remove the sign extension of source registers, MULT
and MULTU are identical (as are DMULT and DMULTU).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241026175349.84523-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Extract the decode_64bit_enabled() helper which detects
whether CPUs can run 64-bit instructions.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20241026175349.84523-2-philmd@linaro.org>
Directly use tcg_constant_tl() for constant integer, this
save a call to tcg_gen_movi_tl(), often saving a temp register.
Most of the places found using the following Coccinelle spatch script:
@@
identifier tmp;
constant val;
@@
* TCGv tmp = tcg_temp_new();
...
* tcg_gen_movi_tl(tmp, val);
@@
identifier tmp;
int val;
@@
* TCGv tmp = tcg_temp_new();
...
* tcg_gen_movi_i64(tmp, val);
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-2-philmd@linaro.org>
Replace tcg_gen_movi_tl() + gen_op_addr_add() by a single
gen_op_addr_addi() call.
gen_op_addr_addi() calls tcg_gen_addi_tl() which might
optimize if the immediate is zero.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-13-philmd@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-12-philmd@linaro.org>
Introduce mo_endian() which returns the endian MemOp
corresponding to the vCPU DisasContext.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-10-philmd@linaro.org>
MEMOP_IDX() is unused since commit 948f88661c6 ("target/mips:
Use cpu_*_data_ra for msa load/store"), remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241014232235.51988-1-philmd@linaro.org>
In commit 6d0cad12594 ("target/mips: Finish conversion to
tcg_gen_qemu_{ld,st}_*") we renamed the argument of the user
definition. Rename the system part for coherency. Since the
argument is ignored, prefix with 'ignored_'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-9-philmd@linaro.org>
Extract the implicit MO_TE definition in order to replace
it by runtime variable in the next commit.
Mechanical change using:
$ for n in UW UL UQ UO SW SL SQ; do \
sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
$(git grep -l MO_TE$n target/mips); \
done
manually remove superfluous parenthesis in nanoMIPS gen_save().
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-8-philmd@linaro.org>
Instead of swapping the reversed target endianness
using MO_BSWAP, directly return the correct endianness.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-7-philmd@linaro.org>
Functions are easier to rework than macros. Besides,
there is no gain here in inlining these.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-6-philmd@linaro.org>
Replace compile-time MO_TE evaluation by runtime mo_endian_env()
one, which expand target endianness from vCPU env.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-5-philmd@linaro.org>
Methods using the 'cpu_' prefix usually take a (Arch)CPUState
argument. Since this method takes a DisasContext argument,
rename it as disas_is_bigendian().
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-3-philmd@linaro.org>
In order to re-use cpu_is_bigendian(), declare it on "internal.h"
after renaming it as mips_env_is_bigendian().
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-2-philmd@linaro.org>
It is used in a couple of places only, both within the same target.
Those can use the cflags just as well, so remove the separate field.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010083641.1785069-1-pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PTE is not CODE so load it as normal DATA access.
Fixes: 074cfcb4da ("Implement hardware page table walker for MIPS32")
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240814090452.2591-4-philmd@linaro.org>
When refactoring page_table_walk_refill() in commit 4e999bf419
we missed the indirect call to cpu_mmu_index() in get_pte():
page_table_walk_refill()
-> get_pte()
-> cpu_ld[lq]_code()
-> cpu_mmu_index()
Since we don't mask anymore the modes in hflags, cpu_mmu_index()
can return UM or SM, while we only expect KM or ERL.
Fix by propagating ptw_mmu_idx to get_pte(), and use the
cpu_ld/st_code_mmu() API with the correct MemOpIdx.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reported-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2470
Fixes: 4e999bf419 ("target/mips: Pass ptw_mmu_idx down from mips_cpu_tlb_fill")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240814090452.2591-3-philmd@linaro.org>
In order to simplify the next commit, pass the PTE size as MemOp.
Rename:
native_shift -> native_op
directory_shift -> directory_mop
leaf_shift -> leaf_mop
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240814090452.2591-2-philmd@linaro.org>
Since the SEMIHOSTING feature is optional, we need
a stub to link when it is disabled.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-4-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-11-alex.bennee@linaro.org>
Since commit e1152f8166 ("target/mips: Remove helpers accessing
SAAR registers") this header is not needed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240529155216.5574-1-philmd@linaro.org>
Almost all of the disas_log implementations are identical.
Unify them within translator_loop.
Drop extra Priv/Virt logging from target/riscv.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-19-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
DisasContext::saar is not used, remove it.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-11-philmd@linaro.org>
DisasContext::saar boolean is never set, so this code
is not reachable. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-9-philmd@linaro.org>
