shvsatpa is defined in RVA22 as:
"All translation modes supported in satp must be supported in vsatp."
This is always true in TCG so let's claim support for it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
shvstvecd is defined in RVA22 as:
"vstvec.MODE must be capable of holding the value 0 (Direct).
When vstvec.MODE=Direct, vstvec.BASE must be capable of holding any
valid four-byte-aligned address."
This is always true for TCG so let's claim support for it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
shtvala is described in RVA22 as:
"htval must be written with the faulting guest physical address
in all circumstances permitted by the ISA."
This is the case since commit 3067553993, so claim support for shtvala.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
shvstvala is defined in RVA22 as:
"vstval must be written in all cases described above for stval."
By "cases describe above" the doc refer to the description of sstvala:
"stval must be written with the faulting virtual address for load,
store, and instruction page-fault, access-fault, and misaligned
exceptions, and for breakpoint exceptions other than those caused by
execution of the EBREAK or C.EBREAK instructions. For
virtual-instruction and illegal-instruction exceptions, stval must be
written with the faulting instruction."
We already have sstvala, and our vstval follows the same rules as stval,
so we can claim to support shvstvala too.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
shcounterenw is defined in RVA22 as:
"For any hpmcounter that is not read-only zero, the corresponding bit in
hcounteren must be writable."
This is always true in TCG so let's claim support for it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds virtualization mode (V bit) as bit(2) of register `priv`
per RiscV debug spec v1.0.0-rc4. Checked with gdb-multiarch v12.1.
Note that GDB may display `INVALID` tag for `priv` reg when V bit
is set, this doesn't affect actual access to the bit though.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <tencent_1993B55C24DE7979BF34B200F78287002907@qq.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Calling `vext_continuous_ldst_tlb` for load/stores up to 6 bytes
significantly improves performance.
Co-authored-by: Helene CHELIN <helene.chelin@embecosm.com>
Co-authored-by: Paolo Savini <paolo.savini@embecosm.com>
Co-authored-by: Craig Blackmore <craig.blackmore@embecosm.com>
Signed-off-by: Helene CHELIN <helene.chelin@embecosm.com>
Signed-off-by: Paolo Savini <paolo.savini@embecosm.com>
Signed-off-by: Craig Blackmore <craig.blackmore@embecosm.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241218142353.1027938-3-craig.blackmore@embecosm.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Convert all targets simultaneously, as the gen_intermediate_code
function disappears from the target. While there are possible
workarounds, they're larger than simply performing the conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
-----BEGIN PGP SIGNATURE-----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=0iQW
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu into staging
RISC-V PR for 10.0
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmdkzjgACgkQr3yVEwxT
# gBOcyA//e0XhAQciQglCZZCfINdOyI8qSh+P2K0qtrXZ4VERHEMp7UoD5CQr2cZv
# h8ij1EkatXCwukVELx0rNckxG33bEFgG1oESnQSrwGE0Iu4csNW24nK5WlUS0/r+
# A5oD2wtzEF+cbhTKrVSDBN/PvlnWTKGEoJRkuXWfz5d4uR9eyQhfED0S2j36lNEC
# X1x/OZoKM89XuXtOFe9g55Z5UNzAatcdTISozL0FydiPh7QeVjTLHh28/tt559MX
# 7v5aJFlQuZ78z1mIHkZmPSorSrJ0zqhkP6NWe1ae06oMgzwRQQhYLppDILV4ZgUF
# 3mSDRoXmBycQXiYNPcHep3LdXfvxr+PpWHSevx8gH1jwm93On7Y/H7Uol6TDXzfC
# mrFjalfV5tzrD90ZvB+s5bCMF1q5Z8Dlj0pYF9aN9P1ILoWy3dndFAPJB6uKKDP7
# Qd4qOQ3dVyHAX9jLmVkB6QvAV/vTDrYTsAxaF/EaoLOy0IoKhjTvgda3XzE1MFKA
# gVafLluADIfSEdqa2QR2ExL8d1SZVoiObCp5TMLRer0HIpg/vQZwjfdbo4BgQKL3
# 7Q6wBxcZUNqrFgspXjm5WFIrdk2rfS/79OmvpNM6SZaK6BnklntdJHJHtAWujGsm
# EM310AUFpHMp2h6Nqnemb3qr5l4d20KSt8DhoPAUq1IE59Kb8XY=
# =0iQW
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Dec 2024 20:54:00 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu: (39 commits)
target/riscv: add support for RV64 Xiangshan Nanhu CPU
target/riscv: add ssstateen
target/riscv/tcg: hide warn for named feats when disabling via priv_ver
target/riscv: Include missing headers in 'internals.h'
target/riscv: Include missing headers in 'vector_internals.h'
target/riscv: Check svukte is not enabled in RV32
target/riscv: Expose svukte ISA extension
target/riscv: Check memory access to meet svukte rule
target/riscv: Support hstatus[HUKTE] bit when svukte extension is enabled
target/riscv: Support senvcfg[UKTE] bit when svukte extension is enabled
target/riscv: Add svukte extension capability variable
hw/riscv: Add the checking if DTB overlaps to kernel or initrd
hw/riscv: Add a new struct RISCVBootInfo
hw/riscv: Support to load DTB after 3GB memory on 64-bit system.
hw/char/riscv_htif: Clarify MemoryRegionOps expect 32-bit accesses
hw/char/riscv_htif: Explicit little-endian implementation
MAINTAINERS: Cover RISC-V HTIF interface
tests/qtest/bios-tables-test: Update virt SPCR golden reference for RISC-V
hw/acpi: Upgrade ACPI SPCR table to support SPCR table revision 4 format
qtest: allow SPCR acpi table changes
...
Conflicts:
target/riscv/cpu.c
Merge conflict with DEFINE_PROP_END_OF_LIST() removal. No Property
array terminator is needed anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove the single target-specific definition used in
"exec/translator.h" (TARGET_PAGE_MASK) by un-inlining
is_same_page().
Rename the method as translator_is_same_page() and
improve its documentation.
Use it in translator_use_goto_tb().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241218154145.71353-1-philmd@linaro.org>
TB compile flags, tb_page_addr_t type, tb_cflags() and few
other methods are defined in "exec/translation-block.h".
All these files don't include "exec/translation-block.h" but
include "exec/exec-all.h" which include it. Explicitly include
"exec/translation-block.h" to be able to remove it from
"exec/exec-all.h" later when it won't be necessary. Otherwise
we'd get errors such:
accel/tcg/internal-target.h:59:20: error: a parameter list without types is only allowed in a function definition
59 | void tb_lock_page0(tb_page_addr_t);
| ^
accel/tcg/tb-hash.h:64:23: error: unknown type name 'tb_page_addr_t'
64 | uint32_t tb_hash_func(tb_page_addr_t phys_pc, vaddr pc,
| ^
accel/tcg/tcg-accel-ops.c:62:36: error: use of undeclared identifier 'CF_CLUSTER_SHIFT'
62 | cflags = cpu->cluster_index << CF_CLUSTER_SHIFT;
| ^
accel/tcg/watchpoint.c:102:47: error: use of undeclared identifier 'CF_NOIRQ'
102 | cpu->cflags_next_tb = 1 | CF_NOIRQ | curr_cflags(cpu);
| ^
target/i386/helper.c:536:28: error: use of undeclared identifier 'CF_PCREL'
536 | if (tcg_cflags_has(cs, CF_PCREL)) {
| ^
target/rx/cpu.c:51:21: error: incomplete definition of type 'struct TranslationBlock'
51 | cpu->env.pc = tb->pc;
| ~~^
system/physmem.c:2977:9: error: call to undeclared function 'tb_invalidate_phys_range'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
2977 | tb_invalidate_phys_range(addr, addr + length - 1);
| ^
plugins/api.c:96:12: error: call to undeclared function 'tb_cflags'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
96 | return tb_cflags(tcg_ctx->gen_tb) & CF_MEMI_ONLY;
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-5-philmd@linaro.org>
The TranslationBlock flags are defined in 'exec/translation-block.h'.
tcg_cflags_has/set() use them, it is more logical to declare them in
the same place. Move them there too.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212144430.66224-2-philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Add a CPU entry for the RV64 XiangShan NANHU CPU which
supports single-core and dual-core configurations. More
details can be found at
https://docs.xiangshan.cc/zh-cn/latest/integration/overview
Signed-off-by: MollyChen <xiaoou@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241205073622.46052-1-xiaoou@iscas.ac.cn>
[ Changes by AF
- Fixup code formatting
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
ssstateen is defined in RVA22 as:
"Supervisor-mode view of the state-enable extension. The supervisor-mode
(sstateen0-3) and hypervisor-mode (hstateen0-3) state-enable registers
must be provided."
Add ssstateen as a named feature that is available if we also have
smstateen.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20241113171755.978109-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 68c9e54bea handled a situation where a warning was being shown
when using the 'sifive_e' cpu when disabling the named extension zic64b.
It makes little sense to show user warnings for named extensions that
users can't control, and the solution taken was to disable zic64b
manually in riscv_cpu_update_named_features().
This solution won't scale well when adding more named features, and can
eventually end up repeating riscv_cpu_disable_priv_spec_isa_exts().
Change riscv_cpu_disable_priv_spec_isa_exts() to not show warnings when
disabling a named feature. This will accomplish the same thing we're
doing today while avoiding having two points where we're disabling
exts via priv_ver mismatch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241113171755.978109-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Rather than relying on implicit includes, explicit them,
in order to avoid when refactoring unrelated headers:
target/riscv/internals.h:49:15: error: use of undeclared identifier 'PRV_S'
49 | ret = PRV_S;
| ^
target/riscv/internals.h:93:9: error: call to undeclared function 'env_archcpu'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
93 | if (env_archcpu(env)->cfg.ext_zfinx) {
| ^
target/riscv/internals.h:101:15: error: unknown type name 'float32'; did you mean 'float'?
101 | static inline float32 check_nanbox_s(CPURISCVState *env, uint64_t f)
| ^~~~~~~
| float
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241203200828.47311-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Rather than relying on implicit includes, explicit them,
in order to avoid when refactoring unrelated headers:
target/riscv/vector_internals.h:36:12: error: call to undeclared function 'FIELD_EX32'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
36 | return FIELD_EX32(simd_data(desc), VDATA, NF);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241203200828.47311-2-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The spec explicitly says svukte doesn't support RV32. So check that it
is not enabled in RV32.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-7-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add "svukte" in the ISA string when svukte extension is enabled.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-6-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Follow the Svukte spec, do the memory access address checking
1. Include instruction fetches or explicit memory accesses
2. System run in effective privilege U or VU
3. Check senvcfg[UKTE] being set, or hstatus[HUKTE] being set if
instruction is HLV, HLVX, HSV and execute from U mode to VU mode
4. Depend on Sv39 and check virtual addresses bit[SXLEN-1]
5. Raises a page-fault exception corresponding to the original access
type.
Ref: https://github.com/riscv/riscv-isa-manual/pull/1564/files
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-5-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Svukte extension add HUKTE bit, bit[24] in hstatus CSR. The written
value will be masked when the svukte extension is not enabled.
When hstatus[HUKTE] bit is set, HLV/HLVX/HSV work in the U-mode should
do svukte check.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-4-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Svukte extension add UKTE bit, bit[8] in senvcfg CSR. The bit will be
supported when the svukte extension is enabled.
When senvcfg[UKTE] bit is set, the memory access from U-mode should do
the svukte check only except HLV/HLVX/HSV H-mode instructions which
depend on hstatus[HUKTE].
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-3-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Refer to the draft of svukte extension from:
https://github.com/riscv/riscv-isa-manual/pull/1564
Svukte provides a means to make user-mode accesses to supervisor memory
raise page faults in constant time, mitigating attacks that attempt to
discover the supervisor software's address-space layout.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-2-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the 'irqchip_split()' restriction in kvm_arch_init() now that
we have support for "-accel kvm,kernel-irqchip=split".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Before adding support to kernel-irqchip=split when using KVM AIA we need
to change how we create the in-kernel AIA device.
In the use case we have so far, i.e. in-kernel irqchip without split
mode, both the s-mode APLIC and IMSIC controllers are provided by the
irqchip. In irqchip_split() mode we'll emulate the s-mode APLIC
controller, which will send MSIs to the in-kernel IMSIC controller. To
do that we need to change kvm_riscv_aia_create() to not create the
in-kernel s-mode APLIC controller.
In the kernel source arch/riscv/kvm/aia_aplic.c, function
kvm_riscv_aia_aplic_init(), we verify that the APLIC controller won't be
instantiated by KVM if we do not set 'nr_sources', which is set via
KVM_DEV_RISCV_AIA_CONFIG_SRCS. For QEMU this means that we should not
set 'aia_irq_num' during kvm_riscv_aia_create() in irqchip_split() mode.
In this same condition, skip KVM_DEV_RISCV_AIA_ADDR_APLIC as well since
it is used to set the base address for the in-kernel APLIC controller.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a CPU entry for the Tenstorrent Ascalon CPU, a series of 2 wide to
8 wide RV64 cores. More details can be found at
https://tenstorrent.com/ip/tt-ascalon
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241113110459.1607299-1-antonb@tenstorrent.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that all of the Property arrays are counted, we can remove
the terminator object from each array. Update the assertions
in device_class_set_props to match.
With struct Property being 88 bytes, this was a rather large
form of terminator. Saves 30k from qemu-system-aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are not arrays of Property and had no business
using DEFINE_PROP_END_OF_LIST. Use plain { } instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-20-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Set the default NaN pattern explicitly for riscv.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241202131347.498124-53-peter.maydell@linaro.org
In riscv_cpu_do_interrupt() we use the 'cause' value we got out of
cs->exception as a shift value. However this value can be larger
than 31, which means that "1 << cause" is undefined behaviour,
because we do the shift on an 'int' type.
This causes the undefined behaviour sanitizer to complain
on one of the check-tcg tests:
$ UBSAN_OPTIONS=print_stacktrace=1:abort_on_error=1:halt_on_error=1 ./build/clang/qemu-system-riscv64 -M virt -semihosting -display none -device loader,file=build/clang/tests/tcg/riscv64-softmmu/issue1060
../../target/riscv/cpu_helper.c:1805:38: runtime error: shift exponent 63 is too large for 32-bit type 'int'
#0 0x55f2dc026703 in riscv_cpu_do_interrupt /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../target/riscv/cpu_helper.c:1805:38
#1 0x55f2dc3d170e in cpu_handle_exception /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../accel/tcg/cpu-exec.c:752:9
In this case cause is RISCV_EXCP_SEMIHOST, which is 0x3f.
Use 1ULL instead to ensure that the shift is in range.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 1697837ed9 ("target/riscv: Add M-mode virtual interrupt and IRQ filtering support.")
Fixes: 40336d5b1d ("target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241128103831.3452572-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add support for a few Zc* extensions, Zimop, Zcmop and Zawrs.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Message-ID: <ada40759a79c0728652ace59579aa843cb7bf53f.1727164986.git.zhouquan@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In the vector unit-stride load/store helper functions. the vext_ldst_us
& vext_ldst_whole functions corresponding most of the execution time.
Inline the functions can avoid the function call overhead to improve the
helper function performance.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240918171412.150107-8-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The vector unmasked unit-stride and whole register load/store
instructions will load/store continuous memory. If the endian of both
the host and guest architecture are the same, then we can group the
element load/store to load/store more data at a time.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240918171412.150107-7-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The unmasked unit-stride fault-only-first load instructions are similar
to the unmasked unit-stride load/store instructions that is suitable to
be optimized by using a direct access to host ram fast path.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240918171412.150107-6-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The vector unit-stride whole register load/store instructions are
similar to unmasked unit-stride load/store instructions that is suitable
to be optimized by using a direct access to host ram fast path.
Because the vector whole register load/store instructions do not need to
handle the tail agnostic, so remove the vstart early exit checking.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240918171412.150107-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit references the sve_ldN_r/sve_stN_r helper functions in ARM
target to optimize the vector unmasked unit-stride load/store
implementation with following optimizations:
* Get the page boundary
* Probing pages/resolving host memory address at the beginning if
possible
* Provide new interface to direct access host memory
* Switch to the original slow TLB access when cross page element/violate
page permission/violate pmp/watchpoints in page
The original element load/store interface is replaced by the new element
load/store functions with _tlb & _host postfix that means doing the
element load/store through the original softmmu flow and the direct
access host memory flow.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240918171412.150107-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because the real vl (evl) of vext_ldst_us may be different (e.g.
vlm.v/vsm.v/etc.), so the VSTART_CHECK_EARLY_EXIT checking function
should be replaced by checking evl in vext_ldst_us.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240918171412.150107-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The vm field of the vector load/store whole register instruction's
encoding is 1.
The helper function of the vector load/store whole register instructions
may need the vdata.vm field to do some optimizations.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240918171412.150107-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vcompress packs vl or less fields into vd, so the tail starts after the
last packed field. This could be more clearly expressed in the ISA,
but for now this thread helps to explain it:
https://github.com/riscv/riscv-v-spec/issues/796
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241030043538.939712-1-antonb@tenstorrent.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We do not have control in the default 'riscv-aia' default value. We can
try to set it to a specific value, in this case 'auto', but there's no
guarantee that the host will accept it.
Couple with this we're always doing a 'qemu_log' to inform whether we're
ended up using the host default or if we managed to set the AIA mode to
the QEMU default we wanted to set.
Change the 'riscv-aia' description to better reflect how the option
works, and remove the two informative 'qemu_log' that are now unneeded:
if no message shows, riscv-aia was set to the default or uset-set value.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241028182037.290171-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When failing to set the selected AIA mode, 'aia_mode' is left untouched.
This means that 'aia_mode' will not reflect the actual AIA mode,
retrieved in 'default_aia_mode',
This is benign for now, but it will impact QMP query commands that will
expose the 'aia_mode' value, retrieving the wrong value.
Set 'aia_mode' to 'default_aia_mode' if we fail to change the AIA mode
in KVM.
While we're at it, rework the log/warning messages to be a bit less
verbose. Instead of:
KVM AIA: default mode is emul
qemu-system-riscv64: warning: KVM AIA: failed to set KVM AIA mode
We can use a single warning message:
qemu-system-riscv64: warning: KVM AIA: failed to set KVM AIA mode 'auto', using default host mode 'emul'
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241028182037.290171-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
sspush/sspopchk have compressed encodings carved out of zcmops.
compressed sspush is designated as c.mop.1 while compressed sspopchk
is designated as c.mop.5.
Note that c.sspush x1 exists while c.sspush x5 doesn't. Similarly
c.sspopchk x5 exists while c.sspopchk x1 doesn't.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-18-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicfiss has following instructions
- sspopchk: pops a value from shadow stack and compares with x1/x5.
If they dont match, reports a sw check exception with tval = 3.
- sspush: pushes value in x1/x5 on shadow stack
- ssrdp: reads current shadow stack
- ssamoswap: swaps contents of shadow stack atomically
sspopchk/sspush/ssrdp default to zimop if zimop implemented and SSE=0
If SSE=0, ssamoswap is illegal instruction exception.
This patch implements shadow stack operations for qemu-user and shadow
stack is not protected.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-17-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Extra word 2 is stored during tcg compile and `decode_save_opc` needs
additional argument in order to pass the value. This will be used during
unwind to get extra information about instruction like how to massage
exceptions. Updated all callsites as well.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/594
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-16-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds one more word for tcg compile which can be obtained during
unwind time to determine fault type for original operation (example AMO).
Depending on that, fault can be promoted to store/AMO fault.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-15-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
