The helpers vfp_cmps, vfp_cmpes, vfp_cmpd, vfp_cmped are used only from
the A32 decoder; the A64 decoder uses separate vfp_cmps_a64 etc helpers
(because for A64 we update the main NZCV flags and for A32 we update
the FPSCR NZCV flags). So we can make these helpers use the fp_status_a32
field instead of fp_status.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-10-peter.maydell@linaro.org
Use fp_status_a32 in the vjcvt helper function; this is called only
from the A32/T32 decoder and is not used inside a
set_rmode/restore_rmode sequence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-9-peter.maydell@linaro.org
In is_ebf(), we might be called for A64 or A32, but we have
the CPUARMState* so we can select fp_status_a64 or
fp_status_a32 accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Switch from vfp.fp_status to vfp.fp_status_a64 for helpers which:
* directly reference an fp_status field
* are called only from the A64 decoder
* are not called inside a set_rmode/restore_rmode sequence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250124162836.2332150-8-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We want to split the existing fp_status in the Arm CPUState into
separate float_status fields for AArch32 and AArch64. (This is
because new control bits defined by FEAT_AFP only have an effect for
AArch64, not AArch32.) To make this split we will:
* define new fp_status_a32 and fp_status_a64 which have
identical behaviour to the existing fp_status
* move existing uses of fp_status to fp_status_a32 or
fp_status_a64 as appropriate
* delete the old fp_status when it has no uses left
In this patch we add the new float_status fields.
We will also need to split fp_status_f16, but we will do that
as a separate series of patches.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-7-peter.maydell@linaro.org
In vfp_exceptbits_from_host(), we accumulate the FPSR flags in
an "int", and our return type is also "int". However, the only
callsite returns the same information as a uint32_t, and
more generally we handle FPSR values in the code as uint32_t,
not int. Bring this function in to line with that convention.
There is no behaviour change because none of the FPSR bits
we set in this function are bit 31. The input argument to
the function remains 'int' because that is the return type
of the softfloat get_float_exception_flags().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-6-peter.maydell@linaro.org
Use the FPSR_ named constants in vfp_exceptbits_from_host(),
rather than hardcoded magic numbers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-5-peter.maydell@linaro.org
The pseudocode ResetSVEState() does:
FPSR = ZeroExtend(0x0800009f<31:0>, 64);
but QEMU's arm_reset_sve_state() called vfp_set_fpcr() by accident.
Before the advent of FEAT_AFP, this was only setting a collection of
RES0 bits, which vfp_set_fpsr() would then ignore, so the only effect
was that we didn't actually set the FPSR the way we are supposed to
do. Once FEAT_AFP is implemented, setting the bottom bits of FPSR
will change the floating point behaviour.
Call vfp_set_fpsr(), as we ought to.
(Note for stable backports: commit 7f2a01e7368f9 moved this function
from sme_helper.c to helper.c, but it had the same bug before the
move too.)
Cc: qemu-stable@nongnu.org
Fixes: f84734b87461 ("target/arm: Implement SMSTART, SMSTOP")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-4-peter.maydell@linaro.org
* Fixes booting a Linux kernel which is provided on the command line.
* Allow more than 4GB RAM on 64-bit boxes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5PvvgAKCRD3ErUQojoP
X7JQAQCn2MR4k4lfClDZHNmAFUNw51j56SB5HC/FCUKfOx4dCQD/Tf2OV/gstMOz
nfpvIH6ouXZ2/p5npzTyOt+A8fwUpw0=
=qrs7
-----END PGP SIGNATURE-----
Merge tag 'hppa-system-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa updates
* Fixes booting a Linux kernel which is provided on the command line.
* Allow more than 4GB RAM on 64-bit boxes
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5PvvgAKCRD3ErUQojoP
# X7JQAQCn2MR4k4lfClDZHNmAFUNw51j56SB5HC/FCUKfOx4dCQD/Tf2OV/gstMOz
# nfpvIH6ouXZ2/p5npzTyOt+A8fwUpw0=
# =qrs7
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Jan 2025 14:53:34 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-system-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa: Fix booting Linux kernel with initrd
hw/hppa: Support up to 256 GiB RAM on 64-bit machines
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 20f7b890173b ("hw/hppa: Reset vCPUs calling resettable_reset()")
broke booting the Linux kernel with initrd which may have been provided
on the command line. The problem is, that the mentioned commit zeroes
out initial registers which were preset with addresses for the Linux
kernel and initrd.
Fix it by adding proper variables which are set shortly before starting
the firmware.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 20f7b890173b ("hw/hppa: Reset vCPUs calling resettable_reset()")
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
On LA464, some CSR registers are not used such as CSR_SAVE8 -
CSR_SAVE15, also CSR registers relative with MCE is not used now.
Flag CSRFL_UNUSED is added for these registers, so that it will
not dumped. In order to keep compatiblity, these CSR registers are
not removed since it is used in vmstate already.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Common source file csr.c is added here, it can be used by both
TCG mode and kvm mode. The common code is removed from file
tcg/insn_trans/trans_privileged.c.inc to csrc.c
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Parameter type TCGv and TCGv_ptr for function GenCSRRead and GenCSRWrite
is not used in non-TCG mode. Generic csr function type is added here
with parameter void type, so that it passes to compile with non-TCG mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
With CSR register, dynamic function access is used for CSR register
access in TCG mode, so that csr info can be used by other modules.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
According to table 1-2 in Intel Architecture Instruction Set Extensions
and Future Features (rev 056) [1], ClearwaterForest has the following new
features which have already been virtualized:
- AVX-VNNI-INT16 CPUID.(EAX=7,ECX=1):EDX[bit 10]
- SHA512 CPUID.(EAX=7,ECX=1):EAX[bit 0]
- SM3 CPUID.(EAX=7,ECX=1):EAX[bit 1]
- SM4 CPUID.(EAX=7,ECX=1):EAX[bit 2]
Add above features to new CPU model ClearwaterForest. Comparing with
SierraForest, ClearwaterForest bare-metal contains all features of
SierraForest-v2 CPU model and adds:
- PREFETCHI CPUID.(EAX=7,ECX=1):EDX[bit 14]
- DDPD_U CPUID.(EAX=7,ECX=2):EDX[bit 3]
- BHI_NO IA32_ARCH_CAPABILITIES[bit 20]
Add above and all features of SierraForest-v2 CPU model to new CPU model
ClearwaterForest.
[1] https://cdrdv2.intel.com/v1/dl/getContent/671368
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250121020650.1899618-4-tao1.su@linux.intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Branch History Injection (BHI) is a CPU side-channel vulnerability, where
an attacker may manipulate branch history before transitioning from user
to supervisor mode or from VMX non-root/guest to root mode. CPUs that set
BHI_NO bit in MSR IA32_ARCH_CAPABILITIES to indicate no additional
mitigation is required to prevent BHI.
Make BHI_NO bit available to guests.
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250121020650.1899618-3-tao1.su@linux.intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update SierraForest CPU model to add LAM, 4 bits indicating certain bits
of IA32_SPEC_CTR are supported(intel-psfd, ipred-ctrl, rrsba-ctrl,
bhi-ctrl) and the missing features(ss, tsc-adjust, cldemote, movdiri,
movdir64b)
Also add GDS-NO and RFDS-NO to indicate the related vulnerabilities are
mitigated in stepping 3.
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250121020650.1899618-2-tao1.su@linux.intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For updates to implicit registers (RCX in LOOP instructions, RSI or RDI
in string instructions, or the stack pointer) do the add directly using
the registers (with no temporary) if 32-bit or 64-bit, or use a temporary
created for the occasion if 16-bit. This is more efficient and removes
move instructions for the MO_TL case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20241215090613.89588-14-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that everything has been cleaned up, look at DF and prefixes
in a single function, and call that one from gen_repz and gen_repz_nz.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a common operation that is executed many times in rep
movs or rep stos loops. It can improve performance by several
percentage points.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20241215090613.89588-13-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a TCG loop so that it is not necessary to go through the setup steps
of REP and through the I/O check on every iteration. Interestingly, this
is not a particularly effective optimization on its own, though it avoids
the cost of correct RF emulation that was added in the previous patch.
The main benefit lies in allowing the hoisting of loop invariants outside
the loop, which will happen separately.
The loop exits when the low 16 bits of CX/ECX/RCX are zero (so generally
speaking the string operation runs in 65536 iteration batches) to give
the main loop an opportunity to pick up interrupts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20241215090613.89588-12-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In a repeated string operation, CX/ECX will be decremented until it
is 0 but never underflow. Use this observation to avoid a deposit or
zero-extend operation if the address size of the operation is smaller
than MO_TL.
As in the previous patch, the patch is structured to include some
preparatory work for subsequent changes. In particular, introducing
cx_next prepares for when ECX will be decremented *before* calling
fn(s, ot), and therefore cannot yet be written back to cpu_regs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20241215090613.89588-11-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly generate a TSTEQ branch (which is optimized to NE x,0 if possible).
This does not make much sense yet, but later we will add more checks and some
will use a temporary to check on the decremented value of CX/ECX/RCX; it will
be clearer for all checks to share the same logic using TSTEQ(reg, cx_mask).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20241215090613.89588-10-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the cost of gen_update_cc_op() must be paid anyway, it's easier
to place them manually and not rely on spilling that is buried under
multiple levels of function calls. While at it, clarify the circumstances
in which the gen_update_cc_op() is needed, and why it is not for REPxx
SCAS and REPxx CMPS.
And since cc_op will have been spilled at the point of a fault, just
make the whole insn CC_OP_DYNAMIC. Once repz_opt is reintroduced,
a fault could happen either before or after the first execution of
CMPS/SCAS, and CC_OP_DYNAMIC sidesteps the complicated matter of what
x86_restore_state_to_opc would do.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20241215090613.89588-9-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RF must be set on traps and interrupts from a string instruction,
except if they occur after the last iteration. Ensure it is set
before giving the main loop a chance to execute.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20241215090613.89588-8-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow using them in the code that translates REP/REPZ, without
forward declarations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20241215090613.89588-7-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The condition for optimizing repeat instruction is more or less the
opposite of what you imagine: almost always the string instruction
was _not_ optimized and optimizing the loop relied on goto_tb.
This is obviously not great for performance, due to the cost of the
exit-to-main-loop check, but also wrong. In fact, after expanding
dc->jmp_opt and simplifying "!!x" to "x", the condition for looping used
to be:
((cflags & CF_NO_GOTO_TB) ||
(flags & (HF_RF_MASK | HF_TF_MASK | HF_INHIBIT_IRQ_MASK))) && !(cflags & CF_USE_ICOUNT)
In other words, setting aside RF (it requires special handling for REP
instructions and it was completely missing), repeat instruction were
being optimized if TF or inhibit IRQ flags were set. This is certainly
wrong for TF, because string instructions trap after every execution,
and probably for interrupt shadow too.
Get rid of repz_opt completely. The next patches will reintroduce the
optimization, applying it in the common case instead of the unlikely
and wrong one.
While at it, place the CX/ECX/RCX=0 case is at the end of the function,
which saves a label and is clearer when reading the generated ops.
For clarity, mark the cc_op explicitly as DYNAMIC even if at the end
of the translation block; the cc_op can come from either the previous
instruction or the string instruction, and currently we rely on
a gen_update_cc_op() that is hidden in the bowels of gen_jcc() to
spill cc_op and mark it clean.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20241215090613.89588-6-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The same "if" is present in all generator functions for string instructions.
Push it inside gen_repz() and gen_repz_nz() instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20241215090613.89588-5-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It only differs in a single call to gen_jcc, so use a "bool" argument
to distinguish the two cases; do not duplicate code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20241215090613.89588-4-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is not needed anymore now that gen_jcc has been eliminated
(merged into the similarly-named gen_Jcc, where the uppercase letter
gives away that it is an emission function).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20241215090613.89588-3-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code of gen_Jcc is very similar to gen_LOOP* and gen_JCXZ, but this
is hidden by gen_jcc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20241215090613.89588-2-pbonzini@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Zjpm v1.0 spec states there should be Supm and Sspm extensions that
are used in profile specification. Enabling Supm extension enables both
Ssnpm and Smnpm, while Sspm enables only Smnpm.
Signed-off-by: Alexey Baturo <baturo.alexey@gmail.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250113194410.1307494-1-baturo.alexey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add the switch to enable the Smdbltrp ISA extension and disable it for
the max cpu. Indeed, OpenSBI when Smdbltrp is present, M-mode double
trap is enabled by default and MSTATUS.MDT needs to be cleared to avoid
taking a double trap. OpenSBI does not currently support it so disable
it for the max cpu to avoid breaking regression tests.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250116131539.2475785-1-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the Smsdbltrp ISA extension is enabled, if a trap happens while
MSTATUS.MDT is already set, it will trigger an abort or an NMI is the
Smrnmi extension is available.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-9-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the Ssdbltrp extension is enabled, SSTATUS.MDT field is cleared
when executing sret if executed in M-mode. When executing mret/mnret,
SSTATUS.MDT is cleared.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-8-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add `ext_smdbltrp`in RISCVCPUConfig and implement MSTATUS.MDT behavior.
Also set MDT to 1 at reset according to the specification.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-7-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add the switch to enable the Ssdbltrp ISA extension.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-6-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the Ssdbltrp ISA extension is enabled, if a trap happens in S-mode
while SSTATUS.SDT isn't cleared, generate a double trap exception to
M-mode.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-5-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the Ssdbltrp extension is enabled, SSTATUS.SDT field is cleared
when executing sret. When executing mret/mnret, SSTATUS.SDT is cleared
when returning to U, VS or VU and VSSTATUS.SDT is cleared when returning
to VU from HS.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-4-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add ext_ssdbltrp in RISCVCPUConfig and implement MSTATUS.SDT,
{H|M}ENVCFG.DTE and modify the availability of MTVAL2 based on the
presence of the Ssdbltrp ISA extension.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-3-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With the current implementation, if we had the following scenario:
- Set bit x in menvcfg
- Set bit x in henvcfg
- Clear bit x in menvcfg
then, the internal variable env->henvcfg would still contain bit x due
to both a wrong menvcfg mask used in write_henvcfg() as well as a
missing update of henvcfg upon menvcfg update.
This can lead to some wrong interpretation of the context. In order to
update henvcfg upon menvcfg writing, call write_henvcfg() after writing
menvcfg. Clearing henvcfg upon writing the new value is also needed in
write_henvcfg() as well as clearing henvcfg upper part when writing it
with write_henvcfgh().
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-2-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add configuration options so that they can be enabled/disabld from
qemu commandline.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-11-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The counter delegation/configuration extensions depend on the following
extensions.
1. Smcdeleg - To enable counter delegation from M to S
2. S[m|s]csrind - To enable indirect access CSRs
Add an implied rule so that these extensions are enabled by default
if the sscfg extension is enabled.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-10-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The dependant ISA features are enabled at the end of cpu_realize
in finalize_features. Thus, PMU init should be invoked after that
only. Move the init invocation to riscv_tcg_cpu_finalize_features.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-9-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Smcdeleg/Ssccfg adds the support for counter delegation via
S*indcsr and Ssccfg.
It also adds a new shadow CSR scountinhibit and menvcfg enable bit (CDE)
to enable this extension and scountovf virtualization.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Co-developed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-8-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds checks in ops performed on xireg and xireg2-xireg6 so that the
counter delegation function will receive a valid xiselect value with the
proper extensions enabled.
Co-developed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-7-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
