If the QEMU binary was built for a 32-bit ELF target we cannot run the
memory address space tests as they all require ability to address more
RAM that can be represented on 32-bit.
We can't use a decorator to skip the tests as we need setUp() to run to
pick the QEMU binary, thus we must call a method at the start of each
test to check and skip it. The functional result is effectively the
same as using a decorator, just less pretty. This code will go away when
32-bit hosts are full dropped from QEMU.
The code allows any non-ELF target since all macOS versions supported
at 64-bit only and we already dropped support for 32-bit Windows.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250228102738.3064045-6-berrange@redhat.com>
[thuth: Add missing byteorder='little' to from_bytes()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
maxmem=4G is too large to address on 32-bit hosts, so reduce it
to 2G since the tuxrun tests don't actually need such an elevated
memory limit.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250228102738.3064045-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'qemu_bin' field is currently set on the class, despite being
accessed as if it were an object instance field with 'self.qemu_bin'.
This is no obvious need to have it as a class field, so move it into
the object instance.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250228102738.3064045-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This was copied over from avocado but has not been used in the new
functional tests.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250228102738.3064045-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace the advent calendar test with a buildroot image built with
qemu_ppc64_e5500_defconfig. Unlike the advent calendar image, this
newer buildroot image supports networking, too. Thus boot a ppce500
machine from kernel and disk, test network and poweroff.
Add '-no-shutdown' to the command line to avoid exiting from QEMU
as it seems to bother the functional framework.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20250226065013.196052-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Add some wording about network support to the commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
On my local machine, for a debug build, sbsaref_alpine takes
nearly 900s:
$ (cd build/x86 && ./pyvenv/bin/meson test --setup thorough --suite func-thorough func-aarch64-aarch64_sbsaref_alpine
)
1/1 qemu:func-thorough+func-aarch64-thorough+thorough / func-aarch64-aarch64_sbsaref_alpine
OK 896.90s
arm_aspeed_rainier can also run close to its current timeout:
6/44 qemu:func-thorough+func-arm-thorough+thorough / func-arm-arm_aspeed_rainier
OK 215.75s
and arm_aspeed_ast2500 and arm_aspeed_ast2600 can go over:
13/44 qemu:func-thorough+func-arm-thorough+thorough / func-arm-arm_aspeed_ast2600
OK 792.94s
27/44 qemu:func-thorough+func-arm-thorough+thorough / func-arm-arm_aspeed_ast2500
TIMEOUT 480.01s
The sx1 test fails not on the overall meson timeout but on the
60 second timeout in some of the subtests.
Bump all these timeouts up a bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250221140640.786341-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Put the tests into a separate file now (in the functional framework,
each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com
Message-ID: <20250218152744.228335-14-thuth@redhat.com>
Put the tests into a separate file now (in the functional framework,
each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-13-thuth@redhat.com>
Put the tests into a separate file now (in the functional framework,
each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-12-thuth@redhat.com>
Put the tests into a separate file now (since in the functional
framework, each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-11-thuth@redhat.com>
Put the tests into a separate file now (since in the functional
framework, each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-10-thuth@redhat.com>
Put the tests into a separate file now (since in the functional
framework, each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-9-thuth@redhat.com>
Put the tests into a separate file now (since in the functional
framework, each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-8-thuth@redhat.com>
Put the tests into a separate file now (since in the functional
framework, each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-7-thuth@redhat.com>
Put the tests into a separate file now (since in the functional
framework, each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-6-thuth@redhat.com>
Put the tests into a separate file now (since in the functional
framework, each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-5-thuth@redhat.com>
While we're at it, change the machine from SS-20 to SS-10 to
increase the test coverage a little bit (SS-20 is already
tested in the test_sparc_sun4m.py file).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-4-thuth@redhat.com>
Put the tests into a separate file now (since in the functional
framework, each file is run with one specific qemu-system-* binary).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-3-thuth@redhat.com>
With a proper name the log files get a more meaningful name.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250218152744.228335-2-thuth@redhat.com>
Have the MicroblazeMachine class being common to both
MicroblazeBigEndianMachine and MicroblazeLittleEndianMachine
classes. Move the xmaton and ballerina tests to the parent class.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250212123659.52764-11-philmd@linaro.org>
[thuth: Add missing ASSET statements to the leaf classes]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
=tej8
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
# 7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
# fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
# BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
# twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
# XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
# =tej8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Feb 2025 20:21:31 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
docs/devel/reset: Document reset expectations for DMA and IOMMU
hw/vfio/common: Add a trace point in vfio_reset_handler
hw/arm/smmuv3: Move reset to exit phase
hw/i386/intel-iommu: Migrate to 3-phase reset
hw/virtio/virtio-iommu: Migrate to 3-phase reset
vhost-user-snd: correct the calculation of config_size
net: vhost-user: add QAPI events to report connection state
hw/virtio/virtio-nsm: Respond with correct length
vdpa: Fix endian bugs in shadow virtqueue
MAINTAINERS: add more files to `vhost`
cryptodev/vhost: allocate CryptoDevBackendVhost using g_mem0()
vhost-iova-tree: Update documentation
vhost-iova-tree, svq: Implement GPA->IOVA & partial IOVA->HVA trees
vhost-iova-tree: Implement an IOVA-only tree
amd_iommu: Use correct bitmask to set capability BAR
amd_iommu: Use correct DTE field for interrupt passthrough
hw/virtio: reset virtio balloon stats on machine reset
mem/cxl_type3: support 3, 6, 12 and 16 interleave ways
hw/mem/cxl_type3: Ensure errp is set on realization failure
hw/mem/cxl_type3: Fix special_ops memory leak on msix_init_exclusive_bar() failure
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a machine is first booted, all virtio balloon stats are initialized
to their default value -1 (18446744073709551615 when represented as
unsigned).
They remain that way while the firmware is loading, and early phase of
guest OS boot, until the virtio-balloon driver is activated. Thereafter
the reported stats reflect the guest OS activity.
When a machine reset is performed, however, the virtio-balloon stats are
left unchanged by QEMU, despite the guest OS no longer updating them,
nor indeed even still existing.
IOW, the mgmt app keeps getting stale stats until the guest OS starts
once more and loads the virtio-balloon driver (if ever). At that point
the app will see a discontinuity in the reported values as they sudden
jump from the stale value to the new value. This jump is indigituishable
from a valid data update.
While there is an "last-updated" field to report on the freshness of
the stats, that does not unambiguously tell the mgmt app whether the
stats are still conceptually relevant to the current running workload.
It is more conceptually useful to reset the stats to their default
values on machine reset, given that the previous guest workload the
stats reflect no longer exists. The mgmt app can now clearly identify
that there are is no stats information available from the current
executing workload.
The 'last-updated' time is also reset back to 0.
IOW, on every machine reset, the virtio stats are in the same clean
state they were when the macine first powered on.
A functional test is added to validate this behaviour with a real
world guest OS.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20250204094202.2183262-1-berrange@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit f0ec14c78c4 ("tests/avocado: Fix console data loss") fixed
QEMUMachine's problem with console, we don't need to use the sleep()
kludges.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250206131052.30207-15-philmd@linaro.org>
Make microblaze tests a bit more generic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250206131052.30207-14-philmd@linaro.org>
The archive used in test_microblaze_s3adsp1800.py (testing a
big-endian target) contains a big-endian kernel. Rename using
the _BE suffix.
Similarly, the archive in test_microblazeel_s3adsp1800 (testing
a little-endian target) contains a little-endian kernel. Rename
using _LE suffix.
These changes will help when adding cross-endian kernel tests.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250206131052.30207-13-philmd@linaro.org>
The test sequence boots from kernel a sam460ex machine with a
virtio-net device to check PCI.
The buildroot is built with config :
BR2_powerpc=y
BR2_powerpc_440fp=y
and the kernel with the '44x/canyonlands' deconfig and virtio support.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20250203092606.491933-1-clg@redhat.com>
[thuth: sort meson.build alphabetically]
Signed-off-by: Thomas Huth <thuth@redhat.com>
By using the serial console instead of ssh for executing commands
in the guest, we can convert this test to the functional framework.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250130192712.19542-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The vulkan test currently fails if the egl-headless device is not
available. Let's add a proper check to skip the test in this case.
Fixes: 3d30f882ce ("tests/functional: extend test_aarch64_virt with vulkan test")
Reported-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Message-ID: <20250205141140.97437-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test just needs the adaption for the asset handling, then
we can move it to the functional framework.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20250207144409.220006-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Per [*]:
"we're only interested in adopting SPDX for recording the
licensing info, [not] any other SPDX metadata."
Replace the 'SPDX-FileCopyrightText' and 'SPDX-FileContributor'
tags added by Linaro by 'Copyright (c)' and 'Authors' words
respectively.
[*] https://lore.kernel.org/qemu-devel/20241007154548.1144961-4-berrange@redhat.com/
Inspired-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This test is for the big endian MIPS target, not for the little endian
target.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes: 79cb4a14cb6 ("tests/functional: Convert mips32eb 4Kc Malta tests")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move the mips big endian replay tests from tests/avocado/replay_kernel.py
to the functional framework. Since the functional tests should be run per
target, we cannot stick all replay tests in one file. Thus let's add
these tests to a separate file now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250128152839.184599-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move the mips64el replay tests from tests/avocado/replay_kernel.py to
the functional framework. Since the functional tests should be run per
target, we cannot stick all replay tests in one file. Thus let's add
these tests to a separate file there now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250128152839.184599-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move the mipsel replay tests from tests/avocado/replay_kernel.py to
the functional framework. Since the functional tests should be run per
target, we cannot stick all replay tests in one file. Thus let's add
these tests to a new, separate file there instead.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250128152839.184599-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Copy the ReplayKernelBase class from the avocado tests. We are going
to need it to convert the related replay tests in the following patches.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250128152839.184599-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some tests have a very long runtime and might run into timeout issues
e.g. when QEMU has been compiled with --enable-debug. Add a decorator
for marking them more easily. Rename the corresponding environment
variable to be more in sync with the other QEMU_TEST_ALLOW_* switches
that we already have, and add a paragraph about it in the documentation.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250128152839.184599-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fetch the cdrom image for the IBM 6015 PReP PowerPC machine hosted on
the Juneau Linux Users Group site, boot and check Linux version.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20250129104844.1322100-1-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test is for the big endian MIPS target, not for the little endian
target.
Fixes: 79cb4a14cb6 ("tests/functional: Convert mips32eb 4Kc Malta tests")
Message-ID: <20250127184112.108122-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test sequence boots from disk a mac99 machine in 64-bit mode, in
which case the CPU is a PPC 970.
The buildroot rootfs is built with config :
BR2_powerpc64=y
BR2_powerpc_970=y
and the kernel with the g5 deconfig.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20250128212145.1186617-1-clg@redhat.com>
[thuth: Adjusted the comment about '-nographic]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Unfortunately, this test had not been added to meson.build, so we did
not notice a regression: Looking for 'Kernel panic - not syncing: VFS:'
as the indication for the final boot state of the kernel was a bad
idea since 'Kernel panic - not syncing' is the default failure
message of the LinuxKernelTest class, and since we're now reading
the console input byte by byte instead of linewise (see commit
cdad03b74f75), the failure now triggers before we fully read the
success string. Let's fix this by simply looking for the previous
line in the console output instead.
Also, replace the call to cancel() - this was only available in the
Avocado framework. In the functional framework, we must use skipTest()
instead. While we're at it, also fix the TODO here by looking for the
exact error and only skip the test if the plugins are not available.
Fixes: 3abc545e66 ("tests/functional: Convert the tcg_plugins test")
Fixes: cdad03b74f ("tests/functional: rewrite console handling to be bytewise")
Message-ID: <20250123083625.1498495-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we've got a find_free_port() function in the functional
test framework, we can convert the migration test, too.
While the original avocado test was only meant to run on aarch64,
ppc64 and x86, we can turn this into a more generic test by now
and run it on all architectures that have a machine which ships
with a working firmware. To avoid overlapping with the migration
qtest, we now also test migration on machines that are not covered
by the migration qtest yet.
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20250103074308.463860-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The decorators that use a lambda function are currently broken
and do not properly skip the test if the condition is not met.
Using "return skipUnless(lambda: ...)" does not work as expected.
To fix it, rewrite the decorators without lambda, it's simpler
that way anyway.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250122134315.1448794-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
skipIfMissingImports should use importlib.import_module() for checking
whether a module with the name stored in the "impname" variable is
available or not, otherwise the code tries to import a module with
the name "impname" instead.
(This bug hasn't been noticed before since there is another issue
with this decorator that will be fixed by the next patch)
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250122134315.1448794-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* hw/arm: Remove various uses of first_cpu global
* hw/char/imx_serial: Fix reset value of UFCR register
* hw/char/imx_serial: Update all state before restarting ageing timer
* hw/pci-host/designware: Expose MSI IRQ
* hw/arm/stellaris: refactoring, cleanup
* hw/arm/stellaris: map both I2C controllers
* tests/functional: Add a test for the arm microbit machine
* target/arm: arm_reset_sve_state() should set FPSR, not FPCR
* target/arm: refactorings preparatory to FEAT_AFP implementation
* fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
* fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
* hw/usb/canokey: Fix buffer overflow for OUT packet
-----BEGIN PGP SIGNATURE-----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=H4p7
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20250128-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm: Remove various uses of first_cpu global
* hw/char/imx_serial: Fix reset value of UFCR register
* hw/char/imx_serial: Update all state before restarting ageing timer
* hw/pci-host/designware: Expose MSI IRQ
* hw/arm/stellaris: refactoring, cleanup
* hw/arm/stellaris: map both I2C controllers
* tests/functional: Add a test for the arm microbit machine
* target/arm: arm_reset_sve_state() should set FPSR, not FPCR
* target/arm: refactorings preparatory to FEAT_AFP implementation
* fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
* fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
* hw/usb/canokey: Fix buffer overflow for OUT packet
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmeZOi0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3sUeEACwDhM4ldn/gVZgVN7nf42a
# /CLD/qJx1vqi5bAB5zkY1bSCR9hS2IkhTBoQQH9Ng6ztG1IRpT/tKXDJAemWty70
# XgExdl4yjdwXMQK4JKU9qSfaBTuX7Z8Hz+nA1AnblO/4H+XpVNVJzp8Ee/uWTyEd
# BKPBpwqbIXNwUWEqkzDok074Q05rHlhsJD2DsoJTcmtpROhLHLATwQDZGGFuf56H
# LVcdx6GRP+/mWEGWLtj19mvaR/2cn4rQf+I1MACZ81nRjQCHbCohNAMr2wFsKg1+
# 2jYk9uHdFoambJ5+mFuC55Efk+QJaP4vDR0Gf3jLloFr+rS/5h3HiUuD8dUWOwFd
# mPWXsjwYzqBW2knt1nfq1ByzYWZ8rVQEn5G53dX/eoNXuDGsonZxPnevgmv5kIUc
# /W618Jez1nu9RDtNKccobHEtTGlGInJxJ7YzkU7Q6FO80IAqSdV7t9v7uPLJwcnz
# nQz+wVzb4oOmwMzn3BpKY7N/S7IZOSy3ASNHj8o4yCHMJT8Ki0/N4bl0k0DLxJ0T
# RiNCsV9c7MJfo9a+pbOnu0Lc3SjjropdvHYU+bB7R0mgd8ysN+Tou0dpa+i7tUTu
# DHWqs2/+UApHKBiC+DSynPjjRR2aT/5lYFncGaiEVoEQttPLka3SAzgHPVQZs1zD
# bxZkEAFktAFGIjU70fYNkg==
# =H4p7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 Jan 2025 15:12:29 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20250128-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits)
hw/usb/canokey: Fix buffer overflow for OUT packet
target/arm: Use FPST_A64_F16 for halfprec-to-other conversions
target/arm: Remove redundant advsimd float16 helpers
fpu: Fix a comment in softfloat-types.h
fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
target/arm: Remove now-unused vfp.fp_status_f16 and FPST_FPCR_F16
target/arm: Use FPST_A64_F16 in A64 decoder
target/arm: Use FPST_A32_F16 in A32 decoder
target/arm: Use fp_status_f16_a64 in AArch64-only helpers
target/arm: Use fp_status_f16_a32 in AArch32-only helpers
target/arm: Define new fp_status_f16_a32 and fp_status_f16_a64
target/arm: Remove now-unused vfp.fp_status and FPST_FPCR
target/arm: Use FPST_A64 in A64 decoder
target/arm: Use FPST_A32 in A32 decoder
target/arm: Use fp_status_a32 in vfp_cmp helpers
target/arm: Use fp_status_a32 in vjvct helper
target/arm: Use fp_status_a64 or fp_status_a32 in is_ebf()
target/arm: Use vfp.fp_status_a64 in A64-only helper functions
target/arm: Define new fp_status_a32 and fp_status_a64
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't have any functional tests for this machine yet, thus let's
add a test with a MicroPython binary that is available online
(thanks to Joel Stanley for providing it, see:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg606064.html ).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20250124101709.1591761-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The main changes compared to upstream 2024.11 buildroot are
- bumped Linux to version 6.11.11 with a custom config
- changed U-Boot to OpenBMC branch for more support
- included extra target packages
See branch [1] for more details.
There is a slight output change when powering off the machine,
the console now contains :
reboot: Power off not available: System halted
Adjust accordingly the expect string in
do_test_arm_aspeed_buildroot_poweroff().
[1] https://github.com/legoater/buildroot/commits/aspeed-2024.11
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Link: https://lore.kernel.org/qemu-devel/20250122070909.1138598-9-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Use the serial console to execute the commands in the guest instead
of using ssh since we don't have ssh support in the functional
framework yet.
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Message-ID: <20250113082516.57894-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
