Currently we require everywhere that wants to know if there
is an HPET device to check for "CONFIG_HPET || CONFIG_X_HPET_RUST".
Factor out whether the HPET device is Rust or C into a separate
Kconfig stanza, so that CONFIG_HPET means "there is an HPET",
and whether this has pulled in CONFIG_X_HPET_RUST or CONFIG_HPET_C
is something the rest of QEMU can ignore.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Link: https://lore.kernel.org/r/20250319193110.1565578-3-peter.maydell@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation just allows Linux to determine date and time.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20250223114708.1780-19-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add support for the NVPG and NVC BARs. Access to the BAR pages will
cause backlog counter operations to either increment or decriment
the counter.
Also added qtests for the same.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since we are about to remove all support for PPC 405, start by
removing the tests referring to the ref405ep machine.
Link: https://lore.kernel.org/qemu-devel/20250110141800.1587589-2-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250204080649.836155-2-clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add a new command line option to allow selecting between running the
full set of tests or a smaller set of tests. The default will be to
run the small set (i.e. no comand line option provided) so we can
reduce the amount of tests run by default. Only hosts which support
KVM for the target architecture being tested will run the complete set
of tests.
Adjust the meson.build file to pass in the --full option when
appropriate.
(for now, set the option unconditionally until the next patch actually
creates the small set)
Use cases:
configure --target-list=aarch64-softmmu,ppc64-softmmu,s390x-softmmu,x86_64-softmmu
| before - 615s/244 tests | after - 244s/100 tests
------------------------+--------------------------+-----------------------------
make check | full set for all archs | full set for the KVM arch,
make check-qtest | | small set for the rest
| |
qemu-system-$ARCH | full set for $ARCH | small set for $ARCH, KVM or
./migration-test | | TCG automatically chosen
| |
qemu-system-$ARCH | N/A | full set for $ARCH, KVM or
./migration-test --full | | TCG automatically chosen
| |
migration-compat-x86_64 | full set for x86_64 | small set for x86_64
CI job | |
------------------------+--------------------------+-----------------------------
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20250130184012.5711-2-farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-9-alex.bennee@linaro.org>
A new qtest is written that exercizes the fw-cfg DMA based read and write ops
to write values into vmcoreinfo fw-cfg file and read them back and verify that
they are the same.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20250120043847.954881-4-anisinha@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split IPACK Kconfig key as {IPACK, TPCI200, IP_OCTAL_232}
- IPack is a bus
- TPCI200 is a PCI device providing an IPack bus
- IP-Octal232 is an IPack device plugged on an IPack bus
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20250121155526.29982-3-philmd@linaro.org>
Add the framework to test the intel-iommu device.
Currently only tested cap/ecap bits correctness when x-flts=on in scalable
mode. Also tested cap/ecap bits consistency before and after system reset.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20241212083757.605022-21-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I was seeing failures on vnc-display-test on FreeBSD:
make vm-build-freebsd V=1 TARGET_LIST=aarch64-softmmu BUILD_TARGET=check-qtest QEMU_LOCAL=1 DEBUG=1
Leads to:
qemu-system-aarch64: -vnc none: could not read keymap file: 'en-us'
Broken pipe
../src/tests/qtest/libqtest.c:196: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
which was as far as I could tell because we don't populate the
$BLD/pc-bios/keymaps (although scripts/symlink-install-tree.py
attempts to symlink qemu-bundle/usr/local/share/qemu/keymaps/ to that
dir).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250108121054.1126164-31-alex.bennee@linaro.org>
Move the remaining tests into a misc-tests.c file. These tests are
mostly about validation of input and should be in the future replaced
by unit testing.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move the mode/reboot test into a separate file to hold all the CPR
tests. Currently there's just one test, but we're adding more CPR
modes and the feature is different enough from live migration that
it's worth it to have a separate file for it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split the precopy tests from migration-test.c. This is the largest
group of tests and the more difficult one to break into smaller
groups, so move all of it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split the file tests from migration-test.c. These are being moved to
their own file due to being special enough compared with the regular
stream migration. There is also the entire mapped-ram feature which
depends on file migration.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split the next group of tests from migration-test.c, the postcopy
tests. This is another well-defined group of tests and postcopy is a
unique enough feature that it deserves it's own file.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Continuing the split of groups of tests from migration-test.c, split
the compression tests into their own file.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The migration-test.c file has become unwieldy large. It's quite
confusing to navigate with all the test definitions mixed with hook
definitions. The TLS tests make this worse with ifdef'ery.
Since we're planning on having a smaller set of tests to run as smoke
testing on all architectures, I'm taking the time to split some tests
into their own file.
Move the TLS tests into a file of their own.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The migration tests have a set of core infrastructure routines. These
are functions that are called by (almost) all tests and centralize the
common operations of: starting migration on both sides, waiting for
guests to boot, performing guest initialization and teardown, guest
memory validation, etc.
Move this basic framework code (and a few static helpers) into a
separate file. Leave only individual test functions (and their own
static helpers) in migration-test.c.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Rename migration-helpers.c to migration-util.c to make its purpose
more explicit and avoid the "helper" terminology.
Move the file to the qtest/migration/ directory along with the rest of
the migration files.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We current have a bunch of non-test functions in migration-test.c and
some others in migration-helpers.c. In order to split migration-test.c
into separate test binaries, these helpers need to go somewhere
else.
To avoid making migration-helpers even larger, move all QMP-related
functions into a new migration-qmp.c file and put it under the
qtest/migration/ directory.
The new file holds everything that has as its main responsibility to
call into QMP.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move the code that creates the guest binary out of migration-test and
into the qtest/migration/ directory, along with the rest of the
a-b-kernel code.
That code is part of the basic infrastructure of migration tests, it
shouldn't be among the tests themselves.
Also take the chance and rename migration-test.h, which is too generic
a name for this header which contains only values related to guest
memory offsets.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add test_ast2700_evb function and reused testcases which are from
aspeed_smc-test.c for AST2700 testing. The base address, flash base address
and ce index of fmc_cs0 are 0x14000000, 0x100000000 and 0, respectively.
The default flash model of fmc_cs0 is "w25q01jvq" whose size is 128MB,
so set jedec_id 0xef4021.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-11-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The testcases for ASPEED SMC model were placed in aspeed_smc-test.c.
However, this test file only supports for ARM32. To support all ASPEED SOCs
such as AST2700 whose CPU architecture is aarch64, introduces a new
aspeed-smc-utils source file and move all common APIs and testcases
from aspeed_smc-test.c to aspeed-smc-utils.c.
Finally, users are able to re-used these testcase for AST2700 and future
ASPEED SOCs testing.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-10-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This test file is expected to be extended for arbitrary virtio-balloon
related tests, not merely those discovered by fuzzing.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20241129135507.699030-3-berrange@redhat.com>
[PMD: Update MAINTAINERS]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Currently the CMSDK APB watchdog tests target an specialized version
of the device (luminaris using the lm3s811evb machine) that prevents
the development of tests for the more generic device documented in:
https://developer.arm.com/documentation/ddi0479/d/apb-components/apb-watchdog/programmers-model
This patch allows the execution of the watchdog tests in an MPS2
machine (when applicable) which uses the generic version of the CMSDK
APB watchdog.
Finally the rules for compiling the test have to change because it is
possible not to have CONFIG_STELLARIS (required for the lm3s811evb
machine) while still having CONFIG_CMSDK_APB_WATCHDOG and the test
will fail. Due to the addition of the MPS2 machine CONFIG_MPS2
becomes also a dependency for the test compilation.
Signed-off-by: Roque Arcudia Hernandez <roqueh@google.com>
Reviewed-by: Stephen Longfield <slongfield@google.com>
Message-id: 20241115160328.1650269-4-roqueh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CXL now can use Generic Port Affinity Structures.
CXL now allows control of link speed and width
vhost-user-blk now supports live resize, by means of
a new device-sync-config command
amd iommu now supports interrupt remapping
pcie devices now report extended tag field support
intel_iommu dropped support for Transient Mapping, to match VTD spec
arch agnostic ACPI infrastructure for vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmcpNqUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp/2oH/0qO33prhDa48J5mqT9NuJzzYwp5QHKF9Zjv
fDAplMUEmfxZIEgJchcyDWPYTGX2geT4pCFhRWioZMIR/0JyzrFgSwsk1kL88cMh
46gzhNVD6ybyPJ7O0Zq3GLy5jo7rlw/n+fFxKAuRCzcbK/fmH8gNC+RwW1IP64Na
HDczYilHUhnO7yKZFQzQNQVbK4BckrG1bu0Fcx0EMUQBf4V6x7GLOrT+3hkKYcr6
+DG5DmUmv20or/FXnu2Ye+MzR8Ebx6JVK3A3sXEE4Ns2CCzK9QLzeeyc2aU13jWN
OpZ6WcKF8HqYprIwnSsMTxhPcq0/c7TvrGrazVwna5RUBMyjjvc=
=zSX4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
CXL now can use Generic Port Affinity Structures.
CXL now allows control of link speed and width
vhost-user-blk now supports live resize, by means of
a new device-sync-config command
amd iommu now supports interrupt remapping
pcie devices now report extended tag field support
intel_iommu dropped support for Transient Mapping, to match VTD spec
arch agnostic ACPI infrastructure for vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmcpNqUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp/2oH/0qO33prhDa48J5mqT9NuJzzYwp5QHKF9Zjv
# fDAplMUEmfxZIEgJchcyDWPYTGX2geT4pCFhRWioZMIR/0JyzrFgSwsk1kL88cMh
# 46gzhNVD6ybyPJ7O0Zq3GLy5jo7rlw/n+fFxKAuRCzcbK/fmH8gNC+RwW1IP64Na
# HDczYilHUhnO7yKZFQzQNQVbK4BckrG1bu0Fcx0EMUQBf4V6x7GLOrT+3hkKYcr6
# +DG5DmUmv20or/FXnu2Ye+MzR8Ebx6JVK3A3sXEE4Ns2CCzK9QLzeeyc2aU13jWN
# OpZ6WcKF8HqYprIwnSsMTxhPcq0/c7TvrGrazVwna5RUBMyjjvc=
# =zSX4
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 21:03:33 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (65 commits)
intel_iommu: Add missed reserved bit check for IEC descriptor
intel_iommu: Add missed sanity check for 256-bit invalidation queue
intel_iommu: Send IQE event when setting reserved bit in IQT_TAIL
hw/acpi: Update GED with vCPU Hotplug VMSD for migration
tests/qtest/bios-tables-test: Update DSDT golden masters for x86/{pc,q35}
hw/acpi: Update ACPI `_STA` method with QOM vCPU ACPI Hotplug states
qtest: allow ACPI DSDT Table changes
hw/acpi: Make CPUs ACPI `presence` conditional during vCPU hot-unplug
hw/pci: Add parenthesis to PCI_BUILD_BDF macro
hw/cxl: Ensure there is enough data to read the input header in cmd_get_physical_port_state()
hw/cxl: Ensure there is enough data for the header in cmd_ccls_set_lsa()
hw/cxl: Check that writes do not go beyond end of target attributes
hw/cxl: Ensuring enough data to read parameters in cmd_tunnel_management_cmd()
hw/cxl: Avoid accesses beyond the end of cel_log.
hw/cxl: Check the length of data requested fits in get_log()
hw/cxl: Check enough data in cmd_firmware_update_transfer()
hw/cxl: Check input length is large enough in cmd_events_clear_records()
hw/cxl: Check input includes at least the header in cmd_features_set_feature()
hw/cxl: Check size of input data to dynamic capacity mailbox commands
hw/cxl/cxl-mailbox-util: Fix output buffer index update when retrieving DC extents
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
-----BEGIN PGP SIGNATURE-----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=vmIG
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu into staging
* Various bug fixes
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmcoEicACgkQZ7MCdqhi
# HK5M8Q//fz+ZkJndXkBjb1Oinx+q+eVtNm2JrvcWIsXyhG3K+6VxYPp69H+SRv/Z
# TWuUqMQPxq8mhQvBJlDAttp/oaUEiOcCRvs/iUoBN12L4mVxXfdoT88TZ4frN3eP
# 8bePq+DW2N/7gpmsJm5CyEZPpcf9AjVHgLRp3KYFkOJ/14uzvuwnocU39gl+2IUh
# MXHTedQgMNXaKorJXk1NVdM6NxMuVhOvwxAs6ya2gwhxyA5tteo5PiQOnDJWkejf
# xg3RRsNzGYcs1Qg/3kFIf3RfEB0aYbPxROM8IfPaJWKN5KnMggj/JAkHyK1x/V3J
# wml7+cB0doMt/yRiuYJhXpyrtOqpvjRWPA6RhxECWW2kwrovv8NAF8IrFnw9NvOQ
# QC66ZaaFcbAcFrVT1e/iggU76d01II6m4OAgKcXw+FRHgps4VU9y83j7ApNnNUWN
# IXp9hkzoHi5VwX0FrG4ELUr2iEf1HASMvM8EZ/0AxzWj5iNtQB8lFsrEdaGVXyIS
# M5JaJeNjCn4koCyYaFSctH5eKtbzIwnGWnDcdTwaOuQ+9itBvY8O+HZalE6sAc5S
# kLFZ7i/Ut/qxbY5pMumt8LKD4pR1SsOxFB8dJCmn/f/tvRGtIVsoY6btNe4M0+24
# 42MxZbWO6W379C32bwbtsPiGA+aLSgShjP4cWm9cgRjz4RJFnwg=
# =vmIG
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 00:15:35 GMT
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu: (67 commits)
MAINTAINERS: Remove myself as reviewer
MAINTAINERS: Remove myself from XIVE
MAINTAINERS: Remove myself from the PowerNV machines
hw/ppc: Consolidate ppc440 initial mapping creation functions
hw/ppc: Consolidate e500 initial mapping creation functions
tests/qtest: Add XIVE tests for the powernv10 machine
pnv/xive2: TIMA CI ops using alternative offsets or byte lengths
pnv/xive2: TIMA support for 8-byte OS context push for PHYP
pnv/xive: Update PIPR when updating CPPR
pnv/xive: Add special handling for pool targets
ppc/xive2: Support "Pull Thread Context to Odd Thread Reporting Line"
ppc/xive2: Change context/ring specific functions to be generic
ppc/xive2: Support "Pull Thread Context to Register" operation
ppc/xive2: Allow 1-byte write of Target field in TIMA
ppc/xive2: Dump the VP-group and crowd tables with 'info pic'
ppc/xive2: Dump more NVP state with 'info pic'
pnv/xive2: Support for "OS LGS Push" TIMA operation
ppc/xive2: Support TIMA "Pull OS Context to Odd Thread Reporting Line"
pnv/xive2: Define OGEN field in the TIMA
pnv/xive: TIMA patch sets pre-req alignment and formatting changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 73ceb12960e686b763415f0880cc5171ccce01cf.
The "r2d" machine can work in big endian mode, see:
https://lore.kernel.org/qemu-devel/d6755445-1060-48a8-82b6-2f392c21f9b9@landley.net/
So the reasoning for removing sh4eb was wrong.
Message-ID: <20241024082735.42324-2-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Rob Landley <rob@landley.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These XIVE tests include:
- General interrupt IRQ tests that:
- enable and trigger an interrupt
- acknowledge the interrupt
- end of interrupt processing
- Test the Pull Thread Context to Odd Thread Reporting Line
- Test the different cache flush inject and queue sync inject operations
Co-authored-by: Frederic Barrat <fbarrat@linux.ibm.com>
Co-authored-by: Glenn Miles <milesg@linux.ibm.com>
Co-authored-by: Michael Kowal <kowal@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
To test the RISC-V IOMMU emulation we'll use its PCI representation.
Create a new 'riscv-iommu-pci' libqos device that will be present with
CONFIG_RISCV_IOMMU. This config is only available for RISC-V, so this
device will only be consumed by the RISC-V libqos machine.
Start with basic tests: a PCI sanity check and a reset state register
test. The reset test was taken from the RISC-V IOMMU spec chapter 5.2,
"Reset behavior".
More tests will be added later.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add GPIO test cases to test output and input pins from A0 to D7 for AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[ clg: - Updated MAINTAINERS ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The ide-test occasionally times out: on the system I run
vm-build-openbsd on, it usually takes about 18 seconds, but
occasionally hits the 60s timeout, likely when the host machine is
under heavy load. I have also seen this test hit its time limit on
the s390x CI runner.
Double the timeout for this test so that it won't hit its timeout
even when the host is running more slowly than usual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241015113705.239067-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qmp-cmd-test test takes typically about 15s on my local machine.
On the k8s runners it takes usually 20s but sometimes about 60s,
because the k8s runners have wildly variable execution time. If
they're running slow, we hit the default timeout. Bump the
qmp-cmd-test timeout to 120s to avoid this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241008141337.2790423-1-peter.maydell@linaro.org
Since the "shix" machine has been removed, the "r2d" machine is the only
machine that is still available for the sh4 and sh4eb targets. However,
the "r2d" machine apparently does not work in big endian mode, see here:
https://lore.kernel.org/qemu-devel/87a5fwjjew.wl-ysato@users.sourceforge.jp/
So there is no working machine left in the sh4eb-softmmu target, i.e. it
is currently completely useless. Thus remove it from the configuration
now. (Note: The linux-user binary is not removed since it might still
be used to run sh4 binaries in big endian mode).
Message-ID: <20240926105843.81385-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The numa-test needs a default machine in the target binary to work
successfully, so don't try to run this test if the corresponding
machine has not been enabled, e.g. when QEMU has been configured with
"--without-default-devices".
Message-ID: <20240905191434.694440-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When configuring QEMU with "--without-default-devices", currently a lot
of the x86 qtests are failing since they silently assume that a certain
device or the i440fx pc machine is available. Add more checks for CONFIG
switches here to not run those tests in case the corresponding device is
not available.
Message-ID: <20240905191434.694440-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On my OpenBSD VM test system, the ahci-test sometimes hits its 60 second
timeout. It has 75 subtests and allowing at least two seconds per
subtest seems reasonable. Bump it to 150s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240905165554.320577-3-peter.maydell@linaro.org
In this commit Write a qtest pnv-spi-seeprom-test to check the
SPI transactions between spi controller and seeprom device.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
pkix_asn1_tab[] is only accessed by crypto-tls-x509-helpers.c,
rename pkix_asn1_tab.c as pkix_asn1_tab.c.inc and include it once.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[berrange: updated MAINTAINERS for changed filename]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
CI often fails 'cross-i686-tci' job due to runner slowness
Log shows that test almost complete, with a few remaining
when bios-tables-test timeout hits:
19/270 qemu:qtest+qtest-aarch64 / qtest-aarch64/bios-tables-test
TIMEOUT 610.02s killed by signal 15 SIGTERM
...
stderr:
TAP parsing error: Too few tests run (expected 8, got 7)
At the same time overall job running time is only ~30 out of 1hr allowed.
Increase bios-tables-test instance timeout on 5min as a fix
for slow CI runners.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-ID: <20240716125930.620861-1-imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Update list of images supported in unpack_edk2_blobs to enable RISC-V
ACPI table testing.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-13-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add numa test case for loongarch system, it passes to run
with command "make check-qtest".
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240528082155.938586-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The dbus_display1_dep is not really used since all occurrences also
request gio independently. Just list the generated sources and drop
dbus_display1_dep.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add boot-serial-test and filter test cases support on LoongArch system.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240509084745.2514607-1-maobibo@loongson.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
`test_dm163_bank()`
Checks that the pin "sout" of the DM163 led driver outputs the values
received on pin "sin" with the expected latency (depending on the bank).
`test_dm163_gpio_connection()`
Check that changes to relevant STM32L4x5 GPIO pins are propagated to the
DM163 device.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-6-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test:
- read/write from/to the usart registers
- send/receive a character/string over the serial port
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-6-arnaud.minier@telecom-paris.fr
[PMM: fix checkpatch nits, remove commented out code]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
