The RISC-V architecture supports the creation of custom
CSR-mapped devices. It would be convenient to test them in the same way
as MMIO-mapped devices. To do this, a new call has been added
to read/write CSR registers.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
A number of copy and paste kdoc comments are referring to the wrong
definition. Fix those cases.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-29-alex.bennee@linaro.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250115125342.3883374-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the framework to test the intel-iommu device.
Currently only tested cap/ecap bits correctness when x-flts=on in scalable
mode. Also tested cap/ecap bits consistency before and after system reset.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20241212083757.605022-21-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20241212083757.605022-16-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20241210163945.3422623-2-imammedo@redhat.com>
Tested-by: Eric Mackay <eric.mackay@oracle.com>
Acked-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 7df6f751176 ("hw/hppa: Split out machine creation")
renamed the 'hppa' machine as 'B160L', but forgot to update
the boot serial test, which ended being skipped.
Cc: qemu-stable@nongnu.org
Fixes: 7df6f751176 ("hw/hppa: Split out machine creation")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250102100340.43014-2-philmd@linaro.org>
In ufs_write_attr_value(), the value parameter is handled in the CPU's
endian format but provided in big-endian format by the caller. Thus, it
is converted to the CPU's endian format. The related test code is also
fixed to reflect this change.
Fixes: 7c85332a2b3e ("hw/ufs: minor bug fixes related to ufs-test")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-ID: <20250107084356epcms2p2af4d86432174d76ea57336933e46b4c3@epcms2p2>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Before changing default pauth algorithm, we need to make sure current
default one (QARMA5) can still be selected.
$ qemu-system-aarch64 -cpu max,pauth-qarma5=on ...
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241219183211.3493974-2-pierrick.bouvier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tests using the PL011 UART of the virt and raspi machines
weren't properly enabling the UART and its transmitter previous
to sending characters. Follow the PL011 manual initialization
recommendation by setting the proper bits of the control register.
Update the ASM code prefixing:
*UART_CTRL = UART_ENABLE | TX_ENABLE;
to:
while (true) {
*UART_DATA = 'T';
}
Note, since commit 51b61dd4d56 ("hw/char/pl011: Warn when using
disabled transmitter") incomplete PL011 initialization can be
logged using the '-d guest_errors' command line option.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the next commit we are going to use a different value
for the $w1 register, maintaining the same $x2 value. In
order to keep the next commit trivial to review, set $x2
before $w1.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since registers are not modified, we don't need
to refill their values. Directly jump to the previous
store instruction to keep filling the TXDAT register.
The equivalent C code remains:
while (true) {
*UART_DATA = 'T';
}
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I was seeing failures on vnc-display-test on FreeBSD:
make vm-build-freebsd V=1 TARGET_LIST=aarch64-softmmu BUILD_TARGET=check-qtest QEMU_LOCAL=1 DEBUG=1
Leads to:
qemu-system-aarch64: -vnc none: could not read keymap file: 'en-us'
Broken pipe
../src/tests/qtest/libqtest.c:196: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
which was as far as I could tell because we don't populate the
$BLD/pc-bios/keymaps (although scripts/symlink-install-tree.py
attempts to symlink qemu-bundle/usr/local/share/qemu/keymaps/ to that
dir).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250108121054.1126164-31-alex.bennee@linaro.org>
In the qtest environment time will not step forward if the system is
paused (timers disabled) or we have no timer events to fire. As a
result VirtIO events are responded to directly and we don't need to
step time forward.
We still do timeout processing to handle the fact the target QEMU may
not be ready to respond right away. This will usually be due to a slow
CI system or if QEMU is running under something like rr.
Future qtest patches will assert that time actually changes when a
step is requested.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250108121054.1126164-17-alex.bennee@linaro.org>
Postcopy tests have been inadvertently disabled since commit
124a3c58b8 ("tests/qtest/migration: Move ufd_version_check to
utils"). That commit moved the ufd_version_check() function to another
file but failed to make sense of the ifdefs and includes:
The <sys/syscall> include was incorrectly dropped. It is needed to
pull in <asm/unistd.h> for __NR_userfaultfd.
The <sys/ioctl.h> was moved under the wrong ifdef.
Fixes: 124a3c58b8 ("tests/qtest/migration: Move ufd_version_check to utils")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20241218192223.10551-2-farosas@suse.de>
Coverity complained about them. These two variables are never used now
after commit 832c732c5d ("migration-test: Create arch_opts"), and/or commit
34cc54fb35 ("tests/qtest/migration-test: Use custom asm bios for ppc64").
Resolves: Coverity CID 1568379
Resolves: Coverity CID 1568380
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241216161413.1644171-4-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Valgrind complains about:
Use of uninitialised value of size 8
&
Conditional jump or move depends on uninitialised value(s)
both at:
at 0x5265931: _itoa_word (_itoa.c:180)
by 0x527EEC7: __vfprintf_internal (vfprintf-internal.c:1687)
by 0x528C8B0: __vsprintf_internal (iovsprintf.c:96)
by 0x526B920: sprintf (sprintf.c:30)
by 0x1296C7: qtest_memwrite (libqtest.c:1273)
by 0x193C04: send_map (virtio-iommu-test.c:125)
by 0x194392: test_attach_detach (virtio-iommu-test.c:214)
by 0x17BDE7: run_one_test (qos-test.c:181)
by 0x4B0699D: test_case_run (gtestutils.c:2900)
by 0x4B0699D: g_test_run_suite_internal (gtestutils.c:2988)
by 0x4B068B2: g_test_run_suite_internal (gtestutils.c:3005)
by 0x4B068B2: g_test_run_suite_internal (gtestutils.c:3005)
by 0x4B068B2: g_test_run_suite_internal (gtestutils.c:3005)
Uninitialised value was created by a stack allocation
at 0x193AFD: send_map (virtio-iommu-test.c:103)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241209204427.17763-5-farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The dump_aml_files() function calls load_expected_aml() to allocate
the tables but never frees it. Add the missing call to
free_test_data().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241209204427.17763-4-farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Valgrind complains about the probe_o_direct_support() function reading
from an uninitialized buffer. For probing O_DIRECT support we don't
actually need to write to the file, just make sure the pwrite call
doesn't reject the write. Still, write zeroes to the buffer to
suppress the warning.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20241209204427.17763-3-farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The dirty_limit test does two migrations in a row and is leaking the
first 'to' instance. Do proper cleanup.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20241209204427.17763-2-farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
macOS's Cocoa event handling must be done on the initial (main) thread
of the process. Furthermore, if library or application code uses
libdispatch, the main dispatch queue must be handling events on the main
thread as well.
So far, this has affected Qemu in both the Cocoa and SDL UIs, although
in different ways: the Cocoa UI replaces the default qemu_main function
with one that spins Qemu's internal main event loop off onto a
background thread. SDL (which uses Cocoa internally) on the other hand
uses a polling approach within Qemu's main event loop. Events are
polled during the SDL UI's dpy_refresh callback, which happens to run
on the main thread by default.
As UIs are mutually exclusive, this works OK as long as nothing else
needs platform-native event handling. In the next patch, a new device is
introduced based on the ParavirtualizedGraphics.framework in macOS.
This uses libdispatch internally, and only works when events are being
handled on the main runloop. With the current system, it works when
using either the Cocoa or the SDL UI. However, it does not when running
headless. Moreover, any attempt to install a similar scheme to the
Cocoa UI's main thread replacement fails when combined with the SDL
UI.
This change tidies up main thread management to be more flexible.
* The qemu_main global function pointer is a custom function for the
main thread, and it may now be NULL. When it is, the main thread
runs the main Qemu loop. This represents the traditional setup.
* When non-null, spawning the main Qemu event loop on a separate
thread is now done centrally rather than inside the Cocoa UI code.
* For most platforms, qemu_main is indeed NULL by default, but on
Darwin, it defaults to a function that runs the CFRunLoop.
* The Cocoa UI sets qemu_main to a function which runs the
NSApplication event handling runloop, as is usual for a Cocoa app.
* The SDL UI overrides the qemu_main function to NULL, thus
specifying that Qemu's main loop must run on the main
thread.
* The GTK UI also overrides the qemu_main function to NULL.
* For other UIs, or in the absence of UIs, the platform's default
behaviour is followed.
This means that on macOS, the platform's runloop events are always
handled, regardless of chosen UI. The new PV graphics device will
thus work in all configurations. There is no functional change on other
operating systems.
Implementing this via a global function pointer variable is a bit
ugly, but it's probably worth investigating the existing UI thread rule
violations in the SDL (e.g. #2537) and GTK+ back-ends. Fixing those
issues might precipitate requirements similar but not identical to those
of the Cocoa UI; hopefully we'll see some kind of pattern emerge, which
can then be used as a basis for an overhaul. (In fact, it may turn
out to be simplest to split the UI/native platform event thread from the
QEMU main event loop on all platforms, with any UI or even none at all.)
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-2-phil@philjordan.eu>
[PMD: Declare 'qemu_main' symbol in tests/qtest/fuzz/fuzz.c,
add missing g_assert_not_reached() call in main()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Move the remaining tests into a misc-tests.c file. These tests are
mostly about validation of input and should be in the future replaced
by unit testing.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
This test is already starting to bitrot, so first remove it from ifdef
and fix compile issues. ppc64 transfers about 2MB, so bump the size
threshold too.
It was said to be broken on aarch64 but it may have been due to the
limited shm size under Gitlab CI.
Cc: Yury Kotov <yury-kotov@yandex-team.ru>
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
[put it under flaky tests, we still don't have a solution for the CI]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move the mode/reboot test into a separate file to hold all the CPR
tests. Currently there's just one test, but we're adding more CPR
modes and the feature is different enough from live migration that
it's worth it to have a separate file for it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split the precopy tests from migration-test.c. This is the largest
group of tests and the more difficult one to break into smaller
groups, so move all of it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split the file tests from migration-test.c. These are being moved to
their own file due to being special enough compared with the regular
stream migration. There is also the entire mapped-ram feature which
depends on file migration.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split the next group of tests from migration-test.c, the postcopy
tests. This is another well-defined group of tests and postcopy is a
unique enough feature that it deserves it's own file.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Continuing the split of groups of tests from migration-test.c, split
the compression tests into their own file.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The migration-test.c file has become unwieldy large. It's quite
confusing to navigate with all the test definitions mixed with hook
definitions. The TLS tests make this worse with ifdef'ery.
Since we're planning on having a smaller set of tests to run as smoke
testing on all architectures, I'm taking the time to split some tests
into their own file.
Move the TLS tests into a file of their own.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The migration tests have a set of core infrastructure routines. These
are functions that are called by (almost) all tests and centralize the
common operations of: starting migration on both sides, waiting for
guests to boot, performing guest initialization and teardown, guest
memory validation, etc.
Move this basic framework code (and a few static helpers) into a
separate file. Leave only individual test functions (and their own
static helpers) in migration-test.c.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We currently have some environment validation to perform and flags to
set during the initialization of the tests. To be able to add more
migration test binaries, we'll need these tasks to be in their own
function so they can be called from more than one place.
Move the initialization code to a function and introduce the
MigrationTestEnv structure to hold the flags that are accessed during
test registration.
Make the env object static to avoid have to change all the code to
pass it around. Similarly with the tmpfs variable, which is used
extensively.
Note: I'm keeping the new functions in migration-test.c because they
are going to be moved in the next patch to the correct place.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move kvm_dirty_ring_supported() to migration-util.c. Similarly to
ufd_version_check(), this function is used during test definition so
put it in the utils file.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move ufd_version_check() to migration-util.c file. This is a helper
function that is used during tests definition so it should be
available outside of migration-test.c
Since the function is moving to another file, change it to stop
accessing the global uffd_feature_thread_id and take it as argument
instead.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Rename migration-helpers.c to migration-util.c to make its purpose
more explicit and avoid the "helper" terminology.
Move the file to the qtest/migration/ directory along with the rest of
the migration files.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We current have a bunch of non-test functions in migration-test.c and
some others in migration-helpers.c. In order to split migration-test.c
into separate test binaries, these helpers need to go somewhere
else.
To avoid making migration-helpers even larger, move all QMP-related
functions into a new migration-qmp.c file and put it under the
qtest/migration/ directory.
The new file holds everything that has as its main responsibility to
call into QMP.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move the code that creates the guest binary out of migration-test and
into the qtest/migration/ directory, along with the rest of the
a-b-kernel code.
That code is part of the basic infrastructure of migration tests, it
shouldn't be among the tests themselves.
Also take the chance and rename migration-test.h, which is too generic
a name for this header which contains only values related to guest
memory offsets.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The current build structure for migration tests is confusing. There is
the tests/migration directory, which contains two different guest code
implementations, one for the qtests (a-b-{bootblock|kernel}.S) and
another for the guestperf script (stress.c). One uses a Makefile,
while the other uses meson.
The next patches will add a new qtests/migration/ directory to hold
qtest code which will make the situation even more confusing.
Move the guest code used by qtests into a new qtests/migration/
directory and rename the old one to tests/migration-stress.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Test frameworks usually prefix "test_" to the entry point of the test
code. Having every function prefixed with test_ makes it hard to
understand the code and to grep for the actual tests.
Remove the "test" prefix from everything that is not a test.
In order to still keep some namespacing, stick to the "migrate_"
prefix, which is the most used currently.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Standardize the hook names:
- change the names to .start|end_hook to match
test_migrate_start|end()
- use the migrate_hook_start_ and migrate_hook_end_ prefixes
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In the device and drive plug/unplug tests we want to trigger
a system reset and then see if we get the appropriate
DEVICE_DELETED event. Use qtest_system_reset_nowait() here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
