* Run docker probe only if docker or podman are available
The docker probe uses "sudo -n" which can cause an e-mail with a security warning
each time when configure is run. Therefore run docker probe only if either docker
or podman are available.
That avoids the problematic "sudo -n" on build environments which have neither
docker nor podman installed.
Fixes: c4575b59155e2e00 ("configure: store container engine in config-host.mak")
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221030083510.310584-1-sw@weilnetz.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221117172532.538149-2-alex.bennee@linaro.org>
* tests/avocado/machine_aspeed.py: Reduce noise on the console for SDK tests
The Aspeed SDK images are based on OpenBMC which starts a lot of
services. The output noise on the console can break from time to time
the test waiting for the logging prompt.
Change the U-Boot bootargs variable to add "quiet" to the kernel
command line and reduce the output volume. This also drops the test on
the CPU id which was nice to have but not essential.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20221104075347.370503-1-clg@kaod.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221117172532.538149-3-alex.bennee@linaro.org>
* tests/docker: allow user to override check target
This is useful when trying to bisect a particular failing test behind
a docker run. For example:
make docker-test-clang@fedora \
TARGET_LIST=arm-softmmu \
TEST_COMMAND="meson test qtest-arm/qos-test" \
J=9 V=1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-4-alex.bennee@linaro.org>
* docs/devel: add a maintainers section to development process
We don't currently have a clear place in the documentation to describe
the roles and responsibilities of a maintainer. Lets create one so we
can. I've moved a few small bits out of other files to try and keep
everything in one place.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-5-alex.bennee@linaro.org>
* docs/devel: make language a little less code centric
We welcome all sorts of patches.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-6-alex.bennee@linaro.org>
* docs/devel: simplify the minimal checklist
The bullet points are quite long and contain process tips. Move those
bits of the bullet to the relevant sections and link to them. Use a
table for nicer formatting of the checklist.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-7-alex.bennee@linaro.org>
* docs/devel: try and improve the language around patch review
It is important that contributors take the review process seriously
and we collaborate in a respectful way while avoiding personal
attacks. Try and make this clear in the language.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-8-alex.bennee@linaro.org>
* tests/avocado: Raise timeout for boot_linux.py:BootLinuxPPC64.test_pseries_tcg
On my machine, a debug build of QEMU takes about 260 seconds to
complete this test, so with the current timeout value of 180 seconds
it always times out. Double the timeout value to 360 so the test
definitely has enough time to complete.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221110142901.3832318-1-peter.maydell@linaro.org>
Message-Id: <20221117172532.538149-9-alex.bennee@linaro.org>
* tests/avocado: introduce alpine virt test for CI
The boot_linux tests download and run a full cloud image boot and
start a full distro. While the ability to test the full boot chain is
worthwhile it is perhaps a little too heavy weight and causes issues
in CI. Fix this by introducing a new alpine linux ISO boot in
machine_aarch64_virt.
This boots a fully loaded -cpu max with all the bells and whistles in
31s on my machine. A full debug build takes around 180s on my machine
so we set a more generous timeout to cover that.
We don't add a test for lesser GIC versions although there is some
coverage for that already in the boot_xen.py tests. If we want to
introduce more comprehensive testing we can do it with a custom kernel
and initrd rather than a full distro boot.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-10-alex.bennee@linaro.org>
* tests/avocado: skip aarch64 cloud TCG tests in CI
We now have a much lighter weight test in machine_aarch64_virt which
tests the full boot chain in less time. Rename the tests while we are
at it to make it clear it is a Fedora cloud image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-11-alex.bennee@linaro.org>
* gitlab: integrate coverage report
This should hopefully give is nice coverage information about what our
tests (or at least the subset we are running) have hit. Ideally we
would want a way to trigger coverage on tests likely to be affected by
the current commit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117172532.538149-12-alex.bennee@linaro.org>
* vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devices
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.
This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.
This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.
Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
* tests: acpi: whitelist DSDT before moving PRQx to _SB scope
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: x86: move RPQx field back to _SB scope
Commit 47a373faa6b2 (acpi: pc/q35: drop ad-hoc PCI-ISA bridge AML routines and let bus ennumeration generate AML)
moved ISA bridge AML generation to respective devices and was using
aml_alias() to provide PRQx fields in _SB. scope. However, it turned
out that SeaBIOS was not able to process Alias opcode when parsing DSDT,
resulting in lack of keyboard during boot (SeaBIOS console, grub, FreeDOS).
While fix for SeaBIOS is posted
https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/RGPL7HESH5U5JRLEO6FP77CZVHZK5J65/
fixed SeaBIOS might not make into QEMU-7.2 in time.
Hence this workaround that puts PRQx back into _SB scope
and gets rid of aliases in ISA bridge description, so
DSDT will be parsable by broken SeaBIOS.
That brings back hardcoded references to ISA bridge
PCI0.S08.P40C/PCI0.SF8.PIRQ
where middle part now is auto generated based on slot it's
plugged in, but it should be fine as bridge initialization
also hardcodes PCI address of the bridge so it can't ever
move. Once QEMU tree has fixed SeaBIOS blob, we should be able
to drop this part and revert back to alias based approach
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tests: acpi: x86: update expected DSDT after moving PRQx fields in _SB scope
Expected DSDT changes,
pc:
- Field (P40C, ByteAcc, NoLock, Preserve)
+ Scope (\_SB)
{
- PRQ0, 8,
- PRQ1, 8,
- PRQ2, 8,
- PRQ3, 8
+ Field (PCI0.S08.P40C, ByteAcc, NoLock, Preserve)
+ {
+ PRQ0, 8,
+ PRQ1, 8,
+ PRQ2, 8,
+ PRQ3, 8
+ }
}
- Alias (PRQ0, \_SB.PRQ0)
- Alias (PRQ1, \_SB.PRQ1)
- Alias (PRQ2, \_SB.PRQ2)
- Alias (PRQ3, \_SB.PRQ3)
q35:
- Field (PIRQ, ByteAcc, NoLock, Preserve)
- {
- PRQA, 8,
- PRQB, 8,
- PRQC, 8,
- PRQD, 8,
- Offset (0x08),
- PRQE, 8,
- PRQF, 8,
- PRQG, 8,
- PRQH, 8
+ Scope (\_SB)
+ {
+ Field (PCI0.SF8.PIRQ, ByteAcc, NoLock, Preserve)
+ {
+ PRQA, 8,
+ PRQB, 8,
+ PRQC, 8,
+ PRQD, 8,
+ Offset (0x08),
+ PRQE, 8,
+ PRQF, 8,
+ PRQG, 8,
+ PRQH, 8
+ }
}
- Alias (PRQA, \_SB.PRQA)
- Alias (PRQB, \_SB.PRQB)
- Alias (PRQC, \_SB.PRQC)
- Alias (PRQD, \_SB.PRQD)
- Alias (PRQE, \_SB.PRQE)
- Alias (PRQF, \_SB.PRQF)
- Alias (PRQG, \_SB.PRQG)
- Alias (PRQH, \_SB.PRQH)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* MAINTAINERS: add mst to list of biosbits maintainers
Adding Michael's name to the list of bios bits maintainers so that all changes
and fixes into biosbits framework can go through his tree and he is notified.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221111151138.36988-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tests/avocado: configure acpi-bits to use avocado timeout
Instead of using a hardcoded timeout, just rely on Avocado's built-in
test case timeout. This helps avoid timeout issues on machines where 60
seconds is not sufficient.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20221115212759.3095751-1-jsnow@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
* acpi/tests/avocado/bits: keep the work directory when BITS_DEBUG is set in env
Debugging bits issue often involves running the QEMU command line manually
outside of the avocado environment with the generated ISO. Hence, its
inconvenient if the iso gets cleaned up after the test has finished. This change
makes sure that the work directory is kept after the test finishes if the test
is run with BITS_DEBUG=1 in the environment so that the iso is available for use
with the QEMU command line.
CC: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221117113630.543495-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* virtio: disable error for out of spec queue-enable
Virtio 1.0 is pretty clear that features have to be
negotiated before enabling VQs. Unfortunately Seabios
ignored this ever since gaining 1.0 support (UEFI is ok).
Comment the error out for now, and add a TODO.
Fixes: 3c37f8b8d1 ("virtio: introduce virtio_queue_enable()")
Cc: "Kangjie Xu" <kangjie.xu@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221121200339.362452-1-mst@redhat.com>
* hw/loongarch: Add default stdout uart in fdt
Add "chosen" subnode into LoongArch fdt, and set it's
"stdout-path" prop to uart node.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221115114923.3372414-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* hw/loongarch: Fix setprop_sized method in fdt rtc node.
Fix setprop_sized method in fdt rtc node.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221116040300.3459818-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* hw/loongarch: Replace the value of uart info with macro
Using macro to replace the value of uart info such as addr, size
in acpi_build method.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221115115008.3372489-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* target/arm: Don't do two-stage lookup if stage 2 is disabled
In get_phys_addr_with_struct(), we call get_phys_addr_twostage() if
the CPU supports EL2. However, we don't check here that stage 2 is
actually enabled. Instead we only check that inside
get_phys_addr_twostage() to skip stage 2 translation. This means
that even if stage 2 is disabled we still tell the stage 1 lookup to
do its page table walks via stage 2.
This works by luck for normal CPU accesses, but it breaks for debug
accesses, which are used by the disassembler and also by semihosting
file reads and writes, because the debug case takes a different code
path inside S1_ptw_translate().
This means that setups that use semihosting for file loads are broken
(a regression since 7.1, introduced in recent ptw refactoring), and
that sometimes disassembly in debug logs reports "unable to read
memory" rather than showing the guest insns.
Fix the bug by hoisting the "is stage 2 enabled?" check up to
get_phys_addr_with_struct(), so that we handle S2 disabled the same
way we do the "no EL2" case, with a simple single stage lookup.
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221121212404.1450382-1-peter.maydell@linaro.org
* target/arm: Use signed quantity to represent VMSAv8-64 translation level
The LPA2 extension implements 52-bit virtual addressing for 4k and 16k
translation granules, and for the former, this means an additional level
of translation is needed. This means we start counting at -1 instead of
0 when doing a walk, and so 'level' is now a signed quantity, and should
be typed as such. So turn it from uint32_t into int32_t.
This avoids a level of -1 getting misinterpreted as being >= 3, and
terminating a page table walk prematurely with a bogus output address.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Update VERSION for v7.2.0-rc2
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tests/avocado: Update the URLs of the advent calendar images
The qemu-advent-calendar.org server will be decommissioned soon.
I've mirrored the images that we use for the QEMU CI to gitlab,
so update their URLs to point to the new location.
Message-Id: <20221121102436.78635-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* tests/qtest: Decrease the amount of output from the qom-test
The logs in the gitlab-CI have a size constraint, and sometimes
we already hit this limit. The biggest part of the log then seems
to be filled by the qom-test, so we should decrease the size of
the output - which can be done easily by not printing the path
for each property, since the path has already been logged at the
beginning of each node that we handle here.
However, if we omit the path, we should make sure to not recurse
into child nodes in between, so that it is clear to which node
each property belongs. Thus store the children and links in a
temporary list and recurse only at the end of each node, when
all properties have already been printed.
Message-Id: <20221121194240.149268-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* tests/avocado: use new rootfs for orangepi test
The old URL wasn't stable. I suspect the current URL will only be
stable for a few months so maybe we need another strategy for hosting
rootfs snapshots?
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221118113309.1057790-1-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Revert "usbredir: avoid queuing hello packet on snapshot restore"
Run state is also in RUN_STATE_PRELAUNCH while "-S" is used.
This reverts commit 0631d4b448454ae8a1ab091c447e3f71ab6e088a
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The original commit broke the usage of usbredir with libvirt, which
starts every domain with "-S".
This workaround is no longer needed because the usbredir behavior
has been fixed in the meantime:
https://gitlab.freedesktop.org/spice/usbredir/-/merge_requests/61
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <1689cec3eadcea87255e390cb236033aca72e168.1669193161.git.jtomko@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* gtk: disable GTK Clipboard with a new meson option
The GTK Clipboard implementation may cause guest hangs.
Therefore implement new configure switch: --enable-gtk-clipboard,
as a meson option disabled by default, which warns in the help
text about the experimental nature of the feature.
Regenerate the meson build options to include it.
The initialization of the clipboard is gtk.c, as well as the
compilation of gtk-clipboard.c are now conditional on this new
option to be set.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1150
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Message-Id: <20221121135538.14625-1-cfontana@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/usb/hcd-xhci.c: spelling: tranfer
Fixes: effaf5a240e03020f4ae953e10b764622c3e87cc
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221105114851.306206-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* ui/gtk: prevent ui lock up when dpy_gl_update called again before current draw event occurs
A warning, "qemu: warning: console: no gl-unblock within" followed by
guest scanout lockup can happen if dpy_gl_update is called in a row
and the second call is made before gd_draw_event scheduled by the first
call is taking place. This is because draw call returns without decrementing
gl_block ref count if the dmabuf was already submitted as shown below.
(gd_gl_area_draw/gd_egl_draw)
if (dmabuf) {
if (!dmabuf->draw_submitted) {
return;
} else {
dmabuf->draw_submitted = false;
}
}
So it should not schedule any redundant draw event in case draw_submitted is
already set in gd_egl_fluch/gd_gl_area_scanout_flush.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221021192315.9110-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/usb/hcd-xhci: Reset the XHCIState with device_cold_reset()
Currently the hcd-xhci-pci and hcd-xhci-sysbus devices, which are
mostly wrappers around the TYPE_XHCI device, which is a direct
subclass of TYPE_DEVICE. Since TYPE_DEVICE devices are not on any
qbus and do not get automatically reset, the wrapper devices both
reset the TYPE_XHCI device in their own reset functions. However,
they do this using device_legacy_reset(), which will reset the device
itself but not any bus it has.
Switch to device_cold_reset(), which avoids using a deprecated
function and also propagates reset along any child buses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221014145423.2102706-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/audio/intel-hda: don't reset codecs twice
Currently the intel-hda device has a reset method which manually
resets all the codecs by calling device_legacy_reset() on them. This
means they get reset twice, once because child devices on a qbus get
reset before the parent device's reset method is called, and then
again because we're manually resetting them.
Drop the manual reset call, and ensure that codecs are still reset
when the guest does a reset via ICH6_GCTL_RESET by using
device_cold_reset() (which resets all the devices on the qbus as well
as the device itself) instead of a direct call to the reset function.
This is a slight ordering change because the (only) codec reset now
happens before the controller registers etc are reset, rather than
once before and then once after, but the codec reset function
hda_audio_reset() doesn't care.
This lets us drop a use of device_legacy_reset(), which is
deprecated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221014142632.2092404-2-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/audio/intel-hda: Drop unnecessary prototype
The only use of intel_hda_reset() is after its definition, so we
don't need to separately declare its prototype at the top of the
file; drop the unnecessary line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221014142632.2092404-3-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* add syx snapshot extras
* it compiles!
* virtiofsd: Add `sigreturn` to the seccomp whitelist
The virtiofsd currently crashes on s390x. This is because of a
`sigreturn` system call. See audit log below:
type=SECCOMP msg=audit(1669382477.611:459): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=system_u:system_r:virtd_t:s0-s0:c0.c1023 pid=6649 comm="virtiofsd" exe="/usr/libexec/virtiofsd" sig=31 arch=80000016 syscall=119 compat=0 ip=0x3fff15f748a code=0x80000000AUID="unset" UID="root" GID="root" ARCH=s390x SYSCALL=sigreturn
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221125143946.27717-1-mhartmay@linux.ibm.com>
* libvhost-user: Fix wrong type of argument to formatting function (reported by LGTM)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20220422070144.1043697-2-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-2-sw@weilnetz.de>
* libvhost-user: Fix format strings
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220422070144.1043697-3-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-3-sw@weilnetz.de>
* libvhost-user: Fix two more format strings
This fix is required for 32 bit hosts. The bug was detected by CI
for arm-linux, but is also relevant for i386-linux.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-4-sw@weilnetz.de>
* libvhost-user: Add format attribute to local function vu_panic
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220422070144.1043697-4-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-5-sw@weilnetz.de>
* MAINTAINERS: Add subprojects/libvhost-user to section "vhost"
Signed-off-by: Stefan Weil <sw@weilnetz.de>
[Michael agreed to act as maintainer for libvhost-user via email in
https://lore.kernel.org/qemu-devel/20221123015218-mutt-send-email-mst@kernel.org/.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-6-sw@weilnetz.de>
* Add G_GNUC_PRINTF to function qemu_set_info_str and fix related issues
With the G_GNUC_PRINTF function attribute the compiler detects
two potential insecure format strings:
../../../net/stream.c:248:31: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
qemu_set_info_str(&s->nc, uri);
^~~
../../../net/stream.c:322:31: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
qemu_set_info_str(&s->nc, uri);
^~~
There are also two other warnings:
../../../net/socket.c:182:35: warning: zero-length gnu_printf format string [-Wformat-zero-length]
182 | qemu_set_info_str(&s->nc, "");
| ^~
../../../net/stream.c:170:35: warning: zero-length gnu_printf format string [-Wformat-zero-length]
170 | qemu_set_info_str(&s->nc, "");
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-7-sw@weilnetz.de>
* del ramfile
* update seabios source from 1.16.0 to 1.16.1
git shortlog rel-1.16.0..rel-1.16.1
===================================
Gerd Hoffmann (3):
malloc: use variable for ZoneHigh size
malloc: use large ZoneHigh when there is enough memory
virtio-blk: use larger default request size
Igor Mammedov (1):
acpi: parse Alias object
Volker Rümelin (2):
pci: refactor the pci_config_*() functions
reset: force standard PCI configuration access
Xiaofei Lee (1):
virtio-blk: Fix incorrect type conversion in virtio_blk_op()
Xuan Zhuo (2):
virtio-mmio: read/write the hi 32 features for mmio
virtio: finalize features before using device
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* update seabios binaries to 1.16.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* fix for non i386 archs
* replay: Fix declaration of replay_read_next_clock
Fixes the build with gcc 13:
replay/replay-time.c:34:6: error: conflicting types for \
'replay_read_next_clock' due to enum/integer mismatch; \
have 'void(ReplayClockKind)' [-Werror=enum-int-mismatch]
34 | void replay_read_next_clock(ReplayClockKind kind)
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from ../qemu/replay/replay-time.c:14:
replay/replay-internal.h:139:6: note: previous declaration of \
'replay_read_next_clock' with type 'void(unsigned int)'
139 | void replay_read_next_clock(unsigned int kind);
| ^~~~~~~~~~~~~~~~~~~~~~
Fixes: 8eda206e090 ("replay: recording and replaying clock ticks")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221129010547.284051-1-richard.henderson@linaro.org>
* hw/display/qxl: Have qxl_log_command Return early if no log_cmd handler
Only 3 command types are logged: no need to call qxl_phys2virt()
for the other types. Using different cases will help to pass
different structure sizes to qxl_phys2virt() in a pair of commits.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-2-philmd@linaro.org>
* hw/display/qxl: Document qxl_phys2virt()
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-3-philmd@linaro.org>
* hw/display/qxl: Pass requested buffer size to qxl_phys2virt()
Currently qxl_phys2virt() doesn't check for buffer overrun.
In order to do so in the next commit, pass the buffer size
as argument.
For QXLCursor in qxl_render_cursor() -> qxl_cursor() we
verify the size of the chunked data ahead, checking we can
access 'sizeof(QXLCursor) + chunk->data_size' bytes.
Since in the SPICE_CURSOR_TYPE_MONO case the cursor is
assumed to fit in one chunk, no change are required.
In SPICE_CURSOR_TYPE_ALPHA the ahead read is handled in
qxl_unpack_chunks().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-4-philmd@linaro.org>
* hw/display/qxl: Avoid buffer overrun in qxl_phys2virt (CVE-2022-4144)
Have qxl_get_check_slot_offset() return false if the requested
buffer size does not fit within the slot memory region.
Similarly qxl_phys2virt() now returns NULL in such case, and
qxl_dirty_one_surface() aborts.
This avoids buffer overrun in the host pointer returned by
memory_region_get_ram_ptr().
Fixes: CVE-2022-4144 (out-of-bounds read)
Reported-by: Wenxu Yin (@awxylitol)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1336
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-5-philmd@linaro.org>
* hw/display/qxl: Assert memory slot fits in preallocated MemoryRegion
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-6-philmd@linaro.org>
* block-backend: avoid bdrv_unregister_buf() NULL pointer deref
bdrv_*() APIs expect a valid BlockDriverState. Calling them with bs=NULL
leads to undefined behavior.
Jonathan Cameron reported this following NULL pointer dereference when a
VM with a virtio-blk device and a memory-backend-file object is
terminated:
1. qemu_cleanup() closes all drives, setting blk->root to NULL
2. qemu_cleanup() calls user_creatable_cleanup(), which results in a RAM
block notifier callback because the memory-backend-file is destroyed.
3. blk_unregister_buf() is called by virtio-blk's BlockRamRegistrar
notifier callback and undefined behavior occurs.
Fixes: baf422684d73 ("virtio-blk: use BDRV_REQ_REGISTERED_BUF optimization hint")
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221121211923.1993171-1-stefanha@redhat.com>
* target/arm: Set TCGCPUOps.restore_state_to_opc for v7m
This setting got missed, breaking v7m.
Fixes: 56c6c98df85c ("target/arm: Convert to tcg_ops restore_state_to_opc")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1347
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221129204146.550394-1-richard.henderson@linaro.org>
* Update VERSION for v7.2.0-rc3
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* hooks are now post mem access
* tests/qtests: override "force-legacy" for gpio virtio-mmio tests
The GPIO device is a VIRTIO_F_VERSION_1 devices but running with a
legacy MMIO interface we miss out that feature bit causing confusion.
For the GPIO test force the mmio bus to support non-legacy so we can
properly test it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1333
Message-Id: <20221130112439.2527228-2-alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vhost: enable vrings in vhost_dev_start() for vhost-user devices
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features")
properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user
backend, but we forgot to enable vrings as specified in
docs/interop/vhost-user.rst:
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the
ring starts directly in the enabled state.
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is
initialized in a disabled state and is enabled by
``VHOST_USER_SET_VRING_ENABLE`` with parameter 1.
Some vhost-user front-ends already did this by calling
vhost_ops.vhost_set_vring_enable() directly:
- backends/cryptodev-vhost.c
- hw/net/virtio-net.c
- hw/virtio/vhost-user-gpio.c
But most didn't do that, so we would leave the vrings disabled and some
backends would not work. We observed this issue with the rust version of
virtiofsd [1], which uses the event loop [2] provided by the
vhost-user-backend crate where requests are not processed if vring is
not enabled.
Let's fix this issue by enabling the vrings in vhost_dev_start() for
vhost-user front-ends that don't already do this directly. Same thing
also in vhost_dev_stop() where we disable vrings.
[1] https://gitlab.com/virtio-fs/virtiofsd
[2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217
Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features")
Reported-by: German Maglione <gmaglione@redhat.com>
Tested-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221123131630.52020-1-sgarzare@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/virtio: add started_vu status field to vhost-user-gpio
As per the fix to vhost-user-blk in f5b22d06fb (vhost: recheck dev
state in the vhost_migration_log routine) we really should track the
connection and starting separately.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-4-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/virtio: generalise CHR_EVENT_CLOSED handling
..and use for both virtio-user-blk and virtio-user-gpio. This avoids
the circular close by deferring shutdown due to disconnection until a
later point. virtio-user-blk already had this mechanism in place so
generalise it as a vhost-user helper function and use for both blk and
gpio devices.
While we are at it we also fix up vhost-user-gpio to re-establish the
event handler after close down so we can reconnect later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221130112439.2527228-5-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* include/hw: VM state takes precedence in virtio_device_should_start
The VM status should always preempt the device status for these
checks. This ensures the device is in the correct state when we
suspend the VM prior to migrations. This restores the checks to the
order they where in before the refactoring moved things around.
While we are at it lets improve our documentation of the various
fields involved and document the two functions.
Fixes: 9f6bcfd99f (hw/virtio: move vm_running check to virtio_device_started)
Fixes: 259d69c00b (hw/virtio: introduce virtio_device_should_start)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-6-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/nvme: fix aio cancel in format
There are several bugs in the async cancel code for the Format command.
Firstly, cancelling a format operation neglects to set iocb->ret as well
as clearing the iocb->aiocb after cancelling the underlying aiocb which
causes the aio callback to ignore the cancellation. Trivial fix.
Secondly, and worse, because the request is queued up for posting to the
CQ in a bottom half, if the cancellation is due to the submission queue
being deleted (which calls blk_aio_cancel), the req structure is
deallocated in nvme_del_sq prior to the bottom half being schedulued.
Fix this by simply removing the bottom half, there is no reason to defer
it anyway.
Fixes: 3bcf26d3d619 ("hw/nvme: reimplement format nvm to allow cancellation")
Reported-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: fix aio cancel in flush
Make sure that iocb->aiocb is NULL'ed when cancelling.
Fix a potential use-after-free by removing the bottom half and enqueuing
the completion directly.
Fixes: 38f4ac65ac88 ("hw/nvme: reimplement flush to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: fix aio cancel in zone reset
If the zone reset operation is cancelled but the block unmap operation
completes normally, the callback will continue resetting the next zone
since it neglects to check iocb->ret which will have been set to
-ECANCELED. Make sure that this is checked and bail out if an error is
present.
Secondly, fix a potential use-after-free by removing the bottom half and
enqueuing the completion directly.
Fixes: 63d96e4ffd71 ("hw/nvme: reimplement zone reset to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: fix aio cancel in dsm
When the DSM operation is cancelled asynchronously, we set iocb->ret to
-ECANCELED. However, the callback function only checks the return value
of the completed aio, which may have completed succesfully prior to the
cancellation and thus the callback ends up continuing the dsm operation
instead of bailing out. Fix this.
Secondly, fix a potential use-after-free by removing the bottom half and
enqueuing the completion directly.
Fixes: d7d1474fd85d ("hw/nvme: reimplement dsm to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: remove copy bh scheduling
Fix a potential use-after-free by removing the bottom half and enqueuing
the completion directly.
Fixes: 796d20681d9b ("hw/nvme: reimplement the copy command to allow aio cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* target/i386: allow MMX instructions with CR4.OSFXSR=0
MMX state is saved/restored by FSAVE/FRSTOR so the instructions are
not illegal opcodes even if CR4.OSFXSR=0. Make sure that validate_vex
takes into account the prefix and only checks HF_OSFXSR_MASK in the
presence of an SSE instruction.
Fixes: 20581aadec5e ("target/i386: validate VEX prefixes via the instructions' exception classes", 2022-10-18)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1350
Reported-by: Helge Konetzka (@hejko on gitlab.com)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* target/i386: Always completely initialize TranslateFault
In get_physical_address, the canonical address check failed to
set TranslateFault.stage2, which resulted in an uninitialized
read from the struct when reporting the fault in x86_cpu_tlb_fill.
Adjust all error paths to use structure assignment so that the
entire struct is always initialized.
Reported-by: Daniel Hoffman <dhoff749@gmail.com>
Fixes: 9bbcf372193a ("target/i386: Reorg GET_HPHYS")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221201074522.178498-1-richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1324
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/loongarch/virt: Add cfi01 pflash device
Add cfi01 pflash device for LoongArch virt machine
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221130100647.398565-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* Sync pc on breakpoints
* tests/qtest/migration-test: Fix unlink error and memory leaks
When running the migration test compiled with Clang from Fedora 37
and sanitizers enabled, there is an error complaining about unlink():
../tests/qtest/migration-test.c:1072:12: runtime error: null pointer
passed as argument 1, which is declared to never be null
/usr/include/unistd.h:858:48: note: nonnull attribute specified here
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
../tests/qtest/migration-test.c:1072:12 in
(test program exited with status code 1)
TAP parsing error: Too few tests run (expected 33, got 20)
The data->clientcert and data->clientkey pointers can indeed be unset
in some tests, so we have to check them before calling unlink() with
those.
While we're at it, I also noticed that the code is only freeing
some but not all of the allocated strings in this function, and
indeed, valgrind is also complaining about memory leaks here.
So let's call g_free() on all allocated strings to avoid leaking
memory here.
Message-Id: <20221125083054.117504-1-thuth@redhat.com>
Tested-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* target/s390x/tcg: Fix and improve the SACF instruction
The SET ADDRESS SPACE CONTROL FAST instruction is not privileged, it can be
used from problem space, too. Just the switching to the home address space
is privileged and should still generate a privilege exception. This bug is
e.g. causing programs like Java that use the "getcpu" vdso kernel function
to crash (see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990417#26 ).
While we're at it, also check if DAT is not enabled. In that case the
instruction is supposed to generate a special operation exception.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/655
Message-Id: <20221201184443.136355-1-thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* hw/display/next-fb: Fix comment typo
Signed-off-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Message-Id: <20221125160849.23711-1-evgeny.v.ermakov@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* fix dev snapshots
* working syx snaps
* Revert "hw/loongarch/virt: Add cfi01 pflash device"
This reverts commit 14dccc8ea6ece7ee63273144fb55e4770a05e0fd.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221205113007.683505-1-gaosong@loongson.cn>
* Update VERSION for v7.2.0-rc4
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Co-authored-by: Stefan Weil <sw@weilnetz.de>
Co-authored-by: Cédric Le Goater <clg@kaod.org>
Co-authored-by: Alex Bennée <alex.bennee@linaro.org>
Co-authored-by: Peter Maydell <peter.maydell@linaro.org>
Co-authored-by: Stefano Garzarella <sgarzare@redhat.com>
Co-authored-by: Igor Mammedov <imammedo@redhat.com>
Co-authored-by: Ani Sinha <ani@anisinha.ca>
Co-authored-by: John Snow <jsnow@redhat.com>
Co-authored-by: Michael S. Tsirkin <mst@redhat.com>
Co-authored-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Co-authored-by: Stefan Hajnoczi <stefanha@redhat.com>
Co-authored-by: Ard Biesheuvel <ardb@kernel.org>
Co-authored-by: Thomas Huth <thuth@redhat.com>
Co-authored-by: Joelle van Dyne <j@getutm.app>
Co-authored-by: Claudio Fontana <cfontana@suse.de>
Co-authored-by: Michael Tokarev <mjt@tls.msk.ru>
Co-authored-by: Dongwon Kim <dongwon.kim@intel.com>
Co-authored-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Co-authored-by: Stefan Weil via <qemu-devel@nongnu.org>
Co-authored-by: Gerd Hoffmann <kraxel@redhat.com>
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-authored-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Co-authored-by: Klaus Jensen <k.jensen@samsung.com>
Co-authored-by: Paolo Bonzini <pbonzini@redhat.com>
Co-authored-by: Song Gao <gaosong@loongson.cn>
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
=zTCn
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pci,pc,virtio: features, tests, fixes, cleanups
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
# uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
# 5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
# Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
# 6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
# EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
# =zTCn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 07 Nov 2022 14:27:53 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (83 commits)
checkpatch: better pattern for inline comments
hw/virtio: introduce virtio_device_should_start
tests/acpi: update tables for new core count test
bios-tables-test: add test for number of cores > 255
tests/acpi: allow changes for core_count2 test
bios-tables-test: teach test to use smbios 3.0 tables
hw/smbios: add core_count2 to smbios table type 4
vhost-user: Support vhost_dev_start
vhost: Change the sequence of device start
intel-iommu: PASID support
intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function
intel-iommu: drop VTDBus
intel-iommu: don't warn guest errors when getting rid2pasid entry
vfio: move implement of vfio_get_xlat_addr() to memory.c
tests: virt: Update expected *.acpihmatvirt tables
tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators
hw/arm/virt: Enable HMAT on arm virt machine
tests: Add HMAT AArch64/virt empty table files
tests: acpi: q35: update expected blobs *.hmat-noinitiators expected HMAT:
tests: acpi: q35: add test for hmat nodes without initiators
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There were several different ways to deal with the situation where the
vector specified for a msix function is out of bound:
- early return a function and keep progresssing
- propagate the error to the caller
- mark msix unusable
- assert it is in bound
- just ignore
An out-of-bound vector should not be specified if the device
implementation is correct so let msix functions always assert that the
specified vector is in range.
An exceptional case is virtio-pci, which allows the guest to configure
vectors. For virtio-pci, it is more appropriate to introduce its own
checks because it is sometimes too late to check the vector range in
msix functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20220829083524.143640-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Akihiko Odaki <<a href="mailto:akihiko.odaki@daynix.com" target="_blank">akihiko.odaki@daynix.com</a>><br>
As per the NVMe Command Set specification Section 3.2.2, if
i) The namespace is formatted to use 16b Guard Protection
Information (i.e., pif = 0) and
ii) The Descriptor Format is not cleared to 0h
Then the copy command should be aborted with the status code of Invalid
Namespace or Format
Fixes: 44219b6029fc ("hw/nvme: 64-bit pi support")
Signed-off-by: Francis Pravin Antony Michael Raj <francis.michael@solidigm.com>
Signed-off-by: Jonathan Derrick <jonathan.derrick@solidigm.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Commit 2e53b0b45024 ("hw/nvme: Use ioeventfd to handle doorbell
updates") had the unintended effect of disabling batching of CQEs.
This patch changes the sq/cq timers to bottom halfs and instead of
calling nvme_post_cqes() immediately (causing an interrupt per cqe), we
defer the call.
| iops
-----------------+------
baseline | 138k
+cqe batching | 233k
Fixes: 2e53b0b45024 ("hw/nvme: Use ioeventfd to handle doorbell updates")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Do not enable ioeventfd by default. Let the feature mature a bit before
we consider enabling it by default.
Fixes: 2e53b0b45024 ("hw/nvme: Use ioeventfd to handle doorbell updates")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Make sure the notifier handler is unregistered in the main loop prior to
cleaning it up.
Fixes: 2e53b0b45024 ("hw/nvme: Use ioeventfd to handle doorbell updates")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
While it is safe to process the queues when they are empty, skip it if
the event notifier callback was invoked spuriously.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add property "ioeventfd" which is enabled by default. When this is
enabled, updates on the doorbell registers will cause KVM to signal
an event to the QEMU main loop to handle the doorbell updates.
Therefore, instead of letting the vcpu thread run both guest VM and
IO emulation, we now use the main loop thread to do IO emulation and
thus the vcpu thread has more cycles for the guest VM.
Since ioeventfd does not tell us the exact value that is written, it is
only useful when shadow doorbell buffer is enabled, where we check
for the value in the shadow doorbell buffer when we get the doorbell
update event.
IOPS comparison on Linux 5.19-rc2: (Unit: KIOPS)
qd 1 4 16 64
qemu 35 121 176 153
ioeventfd 41 133 258 313
Changes since v3:
- Do not deregister ioeventfd when it was not enabled on a SQ/CQ
Signed-off-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
When shadow doorbell buffer is enabled, doorbell registers are lazily
updated. The actual queue head and tail pointers are stored in Shadow
Doorbell buffers.
Add trace events for updates on the Shadow Doorbell buffers and EventIdx
buffers. Also add trace event for the Doorbell Buffer Config command.
Signed-off-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[k.jensen: rebased]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Implement Doorbel Buffer Config command (Section 5.7 in NVMe Spec 1.3)
and Shadow Doorbel buffer & EventIdx buffer handling logic (Section 7.13
in NVMe Spec 1.3). For queues created before the Doorbell Buffer Config
command, the nvme_dbbuf_config function tries to associate each existing
SQ and CQ with its Shadow Doorbel buffer and EventIdx buffer address.
Queues created after the Doorbell Buffer Config command will have the
doorbell buffers associated with them when they are initialized.
In nvme_process_sq and nvme_post_cqe, proactively check for Shadow
Doorbell buffer changes instead of wait for doorbell register changes.
This reduces the number of MMIOs.
In nvme_process_db(), update the shadow doorbell buffer value with
the doorbell register value if it is the admin queue. This is a hack
since hosts like Linux NVMe driver and SPDK do not use shadow
doorbell buffer for the admin queue. Copying the doorbell register
value to the shadow doorbell buffer allows us to support these hosts
as well as spec-compliant hosts that use shadow doorbell buffer for
the admin queue.
Signed-off-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[k.jensen: rebased]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
'namespace' is misspelled in a bunch of places.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-3-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The internally maintained AEN mask is not cleared on reset. Fix this.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This reverts commit d97eee64fef35655bd06f5c44a07fdb83a6274ae.
The emulated controller correctly accounts for not including bit buckets
in the controller-to-host data transfer, however it doesn't correctly
account for the holes for the on-disk data offsets.
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The SRIOV series exposed an issued with how CC register writes are
handled and how CSTS is set in response to that. Specifically, after
applying the SRIOV series, the controller could end up in a state with
CC.EN set to '1' but with CSTS.RDY cleared to '0', causing drivers to
expect CSTS.RDY to transition to '1' but timing out.
Clean this up.
Reviewed-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch updates the initialization place for the AER queue, so it’s
initialized once, at controller initialization, and not every time
controller is enabled.
While the original version works for a non-SR-IOV device, as it’s hard
to interact with the controller if it’s not enabled, the multiple
reinitialization is not necessarily correct.
With the SR/IOV feature enabled a segfault can happen: a VF can have its
controller disabled, while a namespace can still be attached to the
controller through the parent PF. An event generated in such case ends
up on an uninitialized queue.
While it’s an interesting question whether a VF should support AER in
the first place, I don’t think it must be answered today.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
With the new command one can:
- assign flexible resources (queues, interrupts) to primary and
secondary controllers,
- toggle the online/offline state of given controller.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
With four new properties:
- sriov_v{i,q}_flexible,
- sriov_max_v{i,q}_per_vf,
one can configure the number of available flexible resources, as well as
the limits. The primary and secondary controller capability structures
are initialized accordingly.
Since the number of available queues (interrupts) now varies between
VF/PF, BAR size calculation is also adjusted.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
An NVMe device with SR-IOV capability calculates the BAR size
differently for PF and VF, so it makes sense to extract the common code
to a separate function.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The n->reg_size parameter unnecessarily splits the BAR0 size calculation
in two phases; removed to simplify the code.
With all the calculations done in one place, it seems the pow2ceil,
applied originally to reg_size, is unnecessary. The rounding should
happen as the last step, when BAR size includes Nvme registers, queue
registers, and MSIX-related space.
Finally, the size of the mmio memory region is extended to cover the 1st
4KiB padding (see the map below). Access to this range is handled as
interaction with a non-existing queue and generates an error trace, so
actually nothing changes, while the reg_size variable is no longer needed.
--------------------
| BAR0 |
--------------------
[Nvme Registers ]
[Queues ]
[power-of-2 padding] - removed in this patch
[4KiB padding (1) ]
[MSIX TABLE ]
[4KiB padding (2) ]
[MSIX PBA ]
[power-of-2 padding]
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The NVMe device defines two properties: max_ioqpairs, msix_qsize. Having
them as constants is problematic for SR-IOV support.
SR-IOV introduces virtual resources (queues, interrupts) that can be
assigned to PF and its dependent VFs. Each device, following a reset,
should work with the configured number of queues. A single constant is
no longer sufficient to hold the whole state.
This patch tries to solve the problem by introducing additional
variables in NvmeCtrl’s state. The variables for, e.g., managing queues
are therefore organized as:
- n->params.max_ioqpairs – no changes, constant set by the user
- n->(mutable_state) – (not a part of this patch) user-configurable,
specifies number of queues available _after_
reset
- n->conf_ioqpairs - (new) used in all the places instead of the ‘old’
n->params.max_ioqpairs; initialized in realize()
and updated during reset() to reflect user’s
changes to the mutable state
Since the number of available i/o queues and interrupts can change in
runtime, buffers for sq/cqs and the MSIX-related structures are
allocated big enough to handle the limits, to completely avoid the
complicated reallocation. A helper function (nvme_update_msixcap_ts)
updates the corresponding capability register, to signal configuration
changes.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch implements the Function Level Reset, a feature currently not
implemented for the Nvme device, while listed as a mandatory ("shall")
in the 1.4 spec.
The implementation reuses FLR-related building blocks defined for the
pci-bridge module, and follows the same logic:
- FLR capability is advertised in the PCIE config,
- custom pci_write_config callback detects a write to the trigger
register and performs the PCI reset,
- which, eventually, calls the custom dc->reset handler.
Depending on reset type, parts of the state should (or should not) be
cleared. To distinguish the type of reset, an additional parameter is
passed to the reset function.
This patch also enables advertisement of the Power Management PCI
capability. The main reason behind it is to announce the no_soft_reset=1
bit, to signal SR-IOV support where each VF can be reset individually.
The implementation purposedly ignores writes to the PMCS.PS register,
as even such naïve behavior is enough to correctly handle the D3->D0
transition.
It’s worth to note, that the power state transition back to to D3, with
all the corresponding side effects, wasn't and stil isn't handled
properly.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Introduce handling for Secondary Controller List (Identify command with
CNS value of 15h).
Secondary controller ids are unique in the subsystem, hence they are
reserved by it upon initialization of the primary controller to the
number of sriov_max_vfs.
ID reservation requires the addition of an intermediate controller slot
state, so the reserved controller has the address 0xFFFF.
A secondary controller is in the reserved state when it has no virtual
function assigned, but its primary controller is realized.
Secondary controller reservations are released to NULL when its primary
controller is unregistered.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Implementation of Primary Controller Capabilities data
structure (Identify command with CNS value of 14h).
Currently, the command returns only ID of a primary controller.
Handling of remaining fields are added in subsequent patches
implementing virtualization enhancements.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch implements initial support for Single Root I/O Virtualization
on an NVMe device.
Essentially, it allows to define the maximum number of virtual functions
supported by the NVMe controller via sriov_max_vfs parameter.
Passing a non-zero value to sriov_max_vfs triggers reporting of SR-IOV
capability by a physical controller and ARI capability by both the
physical and virtual function devices.
NVMe controllers created via virtual functions mirror functionally
the physical controller, which may not entirely be the case, thus
consideration would be needed on the way to limit the capabilities of
the VF.
NVMe subsystem is required for the use of SR-IOV.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The Linux kernel quirks the QEMU NVMe controller pretty heavily because
of the namespace identifier mess. Since this is now fixed, bump the
firmware revision number to allow the quirk to be disabled for this
revision.
As of now, bump the firmware revision number to be equal to the QEMU
release version number.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Do not report the "null uuid" (all zeros) in the namespace
identification descriptors.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Pass the right constant to nvme_smart_event(). The NVME_AER* values hold
the bit position in the SMART byte, not the shifted value that we expect
it to be in nvme_smart_event().
Fixes: c62720f137df ("hw/block/nvme: trigger async event during injecting smart warning")
Acked-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Current implementation have problem in the read part of copy command.
Because there is no metadata mangling before nvme_dif_check invocation,
reftag error could be thrown for blocks of namespace that have not been
previously written to.
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since there is no return after nvme_dsm_cb invocation, metadata
associated with non-zero block range is currently zeroed. Also this
behaviour leads to segfault since we schedule iocb->bh two times.
First when entering nvme_dsm_cb with iocb->idx == iocb->nr and
second because of missing return on call stack unwinding by calling
blk_aio_pwrite_zeroes and subsequent nvme_dsm_cb callback.
Fixes: d7d1474fd85d ("hw/nvme: reimplement dsm to allow cancellation")
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This adds support for one possible new protection information format
introduced in TP4068 (and integrated in NVMe 2.0): the 64-bit CRC guard
and 48-bit reference tag. This version does not support storage tags.
Like the CRC16 support already present, this uses a software
implementation of CRC64 (so it is naturally pretty slow). But its good
enough for verification purposes.
This may go nicely hand-in-hand with the support that Keith submitted
for the Linux kernel[1].
[1]: https://lore.kernel.org/linux-nvme/20220126165214.GA1782352@dhcp-10-100-145-180.wdc.com/T/
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
A subsequent patch will introduce a new tuple size; so add a helper and
use that instead of sizeof() and magic numbers.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for up to 64 LBA formats through the LBAFEE field of the
Host Behavior Support feature.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
There is no need to extract the format command parameters for each
namespace. Move it to the entry point.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for getting and setting the Host Behavior Support feature.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for TP 4076 ("Zoned Random Write Area"), v2021.08.23
("Ratified").
This adds three new namespace parameters: "zoned.numzrwa" (number of
zrwa resources, i.e. number of zones that can have a zrwa),
"zoned.zrwas" (zrwa size in LBAs), "zoned.zrwafg" (granularity in LBAs
for flushes).
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add struct for Zone Management Send in preparation for more zone send
flags.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
These buffers can be anything, not an array of chars,
so use the 'void *' type for them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The 'buf' argument is not modified, so better pass it as const type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This fixes CVE-2021-3929 "locally" by denying DMA to the iomem of the
device itself. This still allows DMA to MMIO regions of other devices
(e.g. doing P2P DMA to the controller memory buffer of another NVMe
device).
Fixes: CVE-2021-3929
Reported-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since commit 292e13142d2, dma_buf_rw() returns a MemTxResult type.
Do not discard it, return it to the caller. Pass the previously
returned value (the QEMUSGList residual size, which was rarely used)
as an optional argument.
With this new API, SCSIRequest::residual might now be accessed via
a pointer. Since the size_t type does not have the same size on
32 and 64-bit host architectures, convert it to a uint64_t, which
is big enough to hold the residual size, and the type is constant
on both 32/64-bit hosts.
Update the few dma_buf_read() / dma_buf_write() callers to the new
API.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220117125130.131828-1-f4bug@amsat.org>
Update the obvious places where dma_addr_t should be used
(instead of uint64_t, hwaddr, size_t, int32_t types).
This allows to have &dma_addr_t type portable on 32/64-bit
hosts.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220111184309.28637-11-f4bug@amsat.org>
Let devices specify transaction attributes when calling
dma_buf_read().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-13-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_write().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-12-philmd@redhat.com>
Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
Currently, FUSED operations are not supported by QEMU. As per the 1.4 SPEC,
controller should abort the command that requested a fused operation with
an INVALID FIELD error code if they are not supported.
Changes from v1:
Added FUSE flag check also to the admin cmd processing as the FUSED
operations are mentioned in the general SQE section in the SPEC.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Fix is added to check for reserved value in select field for
namespace attachment
CC: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Address 0x0 is a valid address. Fix the admin submission and completion
queue address validation to not error out on this.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
