* Run docker probe only if docker or podman are available
The docker probe uses "sudo -n" which can cause an e-mail with a security warning
each time when configure is run. Therefore run docker probe only if either docker
or podman are available.
That avoids the problematic "sudo -n" on build environments which have neither
docker nor podman installed.
Fixes: c4575b59155e2e00 ("configure: store container engine in config-host.mak")
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221030083510.310584-1-sw@weilnetz.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221117172532.538149-2-alex.bennee@linaro.org>
* tests/avocado/machine_aspeed.py: Reduce noise on the console for SDK tests
The Aspeed SDK images are based on OpenBMC which starts a lot of
services. The output noise on the console can break from time to time
the test waiting for the logging prompt.
Change the U-Boot bootargs variable to add "quiet" to the kernel
command line and reduce the output volume. This also drops the test on
the CPU id which was nice to have but not essential.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20221104075347.370503-1-clg@kaod.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221117172532.538149-3-alex.bennee@linaro.org>
* tests/docker: allow user to override check target
This is useful when trying to bisect a particular failing test behind
a docker run. For example:
make docker-test-clang@fedora \
TARGET_LIST=arm-softmmu \
TEST_COMMAND="meson test qtest-arm/qos-test" \
J=9 V=1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-4-alex.bennee@linaro.org>
* docs/devel: add a maintainers section to development process
We don't currently have a clear place in the documentation to describe
the roles and responsibilities of a maintainer. Lets create one so we
can. I've moved a few small bits out of other files to try and keep
everything in one place.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-5-alex.bennee@linaro.org>
* docs/devel: make language a little less code centric
We welcome all sorts of patches.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-6-alex.bennee@linaro.org>
* docs/devel: simplify the minimal checklist
The bullet points are quite long and contain process tips. Move those
bits of the bullet to the relevant sections and link to them. Use a
table for nicer formatting of the checklist.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-7-alex.bennee@linaro.org>
* docs/devel: try and improve the language around patch review
It is important that contributors take the review process seriously
and we collaborate in a respectful way while avoiding personal
attacks. Try and make this clear in the language.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-8-alex.bennee@linaro.org>
* tests/avocado: Raise timeout for boot_linux.py:BootLinuxPPC64.test_pseries_tcg
On my machine, a debug build of QEMU takes about 260 seconds to
complete this test, so with the current timeout value of 180 seconds
it always times out. Double the timeout value to 360 so the test
definitely has enough time to complete.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221110142901.3832318-1-peter.maydell@linaro.org>
Message-Id: <20221117172532.538149-9-alex.bennee@linaro.org>
* tests/avocado: introduce alpine virt test for CI
The boot_linux tests download and run a full cloud image boot and
start a full distro. While the ability to test the full boot chain is
worthwhile it is perhaps a little too heavy weight and causes issues
in CI. Fix this by introducing a new alpine linux ISO boot in
machine_aarch64_virt.
This boots a fully loaded -cpu max with all the bells and whistles in
31s on my machine. A full debug build takes around 180s on my machine
so we set a more generous timeout to cover that.
We don't add a test for lesser GIC versions although there is some
coverage for that already in the boot_xen.py tests. If we want to
introduce more comprehensive testing we can do it with a custom kernel
and initrd rather than a full distro boot.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-10-alex.bennee@linaro.org>
* tests/avocado: skip aarch64 cloud TCG tests in CI
We now have a much lighter weight test in machine_aarch64_virt which
tests the full boot chain in less time. Rename the tests while we are
at it to make it clear it is a Fedora cloud image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-11-alex.bennee@linaro.org>
* gitlab: integrate coverage report
This should hopefully give is nice coverage information about what our
tests (or at least the subset we are running) have hit. Ideally we
would want a way to trigger coverage on tests likely to be affected by
the current commit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117172532.538149-12-alex.bennee@linaro.org>
* vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devices
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.
This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.
This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.
Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
* tests: acpi: whitelist DSDT before moving PRQx to _SB scope
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: x86: move RPQx field back to _SB scope
Commit 47a373faa6b2 (acpi: pc/q35: drop ad-hoc PCI-ISA bridge AML routines and let bus ennumeration generate AML)
moved ISA bridge AML generation to respective devices and was using
aml_alias() to provide PRQx fields in _SB. scope. However, it turned
out that SeaBIOS was not able to process Alias opcode when parsing DSDT,
resulting in lack of keyboard during boot (SeaBIOS console, grub, FreeDOS).
While fix for SeaBIOS is posted
https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/RGPL7HESH5U5JRLEO6FP77CZVHZK5J65/
fixed SeaBIOS might not make into QEMU-7.2 in time.
Hence this workaround that puts PRQx back into _SB scope
and gets rid of aliases in ISA bridge description, so
DSDT will be parsable by broken SeaBIOS.
That brings back hardcoded references to ISA bridge
PCI0.S08.P40C/PCI0.SF8.PIRQ
where middle part now is auto generated based on slot it's
plugged in, but it should be fine as bridge initialization
also hardcodes PCI address of the bridge so it can't ever
move. Once QEMU tree has fixed SeaBIOS blob, we should be able
to drop this part and revert back to alias based approach
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tests: acpi: x86: update expected DSDT after moving PRQx fields in _SB scope
Expected DSDT changes,
pc:
- Field (P40C, ByteAcc, NoLock, Preserve)
+ Scope (\_SB)
{
- PRQ0, 8,
- PRQ1, 8,
- PRQ2, 8,
- PRQ3, 8
+ Field (PCI0.S08.P40C, ByteAcc, NoLock, Preserve)
+ {
+ PRQ0, 8,
+ PRQ1, 8,
+ PRQ2, 8,
+ PRQ3, 8
+ }
}
- Alias (PRQ0, \_SB.PRQ0)
- Alias (PRQ1, \_SB.PRQ1)
- Alias (PRQ2, \_SB.PRQ2)
- Alias (PRQ3, \_SB.PRQ3)
q35:
- Field (PIRQ, ByteAcc, NoLock, Preserve)
- {
- PRQA, 8,
- PRQB, 8,
- PRQC, 8,
- PRQD, 8,
- Offset (0x08),
- PRQE, 8,
- PRQF, 8,
- PRQG, 8,
- PRQH, 8
+ Scope (\_SB)
+ {
+ Field (PCI0.SF8.PIRQ, ByteAcc, NoLock, Preserve)
+ {
+ PRQA, 8,
+ PRQB, 8,
+ PRQC, 8,
+ PRQD, 8,
+ Offset (0x08),
+ PRQE, 8,
+ PRQF, 8,
+ PRQG, 8,
+ PRQH, 8
+ }
}
- Alias (PRQA, \_SB.PRQA)
- Alias (PRQB, \_SB.PRQB)
- Alias (PRQC, \_SB.PRQC)
- Alias (PRQD, \_SB.PRQD)
- Alias (PRQE, \_SB.PRQE)
- Alias (PRQF, \_SB.PRQF)
- Alias (PRQG, \_SB.PRQG)
- Alias (PRQH, \_SB.PRQH)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* MAINTAINERS: add mst to list of biosbits maintainers
Adding Michael's name to the list of bios bits maintainers so that all changes
and fixes into biosbits framework can go through his tree and he is notified.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221111151138.36988-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tests/avocado: configure acpi-bits to use avocado timeout
Instead of using a hardcoded timeout, just rely on Avocado's built-in
test case timeout. This helps avoid timeout issues on machines where 60
seconds is not sufficient.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20221115212759.3095751-1-jsnow@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
* acpi/tests/avocado/bits: keep the work directory when BITS_DEBUG is set in env
Debugging bits issue often involves running the QEMU command line manually
outside of the avocado environment with the generated ISO. Hence, its
inconvenient if the iso gets cleaned up after the test has finished. This change
makes sure that the work directory is kept after the test finishes if the test
is run with BITS_DEBUG=1 in the environment so that the iso is available for use
with the QEMU command line.
CC: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221117113630.543495-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* virtio: disable error for out of spec queue-enable
Virtio 1.0 is pretty clear that features have to be
negotiated before enabling VQs. Unfortunately Seabios
ignored this ever since gaining 1.0 support (UEFI is ok).
Comment the error out for now, and add a TODO.
Fixes: 3c37f8b8d1 ("virtio: introduce virtio_queue_enable()")
Cc: "Kangjie Xu" <kangjie.xu@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221121200339.362452-1-mst@redhat.com>
* hw/loongarch: Add default stdout uart in fdt
Add "chosen" subnode into LoongArch fdt, and set it's
"stdout-path" prop to uart node.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221115114923.3372414-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* hw/loongarch: Fix setprop_sized method in fdt rtc node.
Fix setprop_sized method in fdt rtc node.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221116040300.3459818-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* hw/loongarch: Replace the value of uart info with macro
Using macro to replace the value of uart info such as addr, size
in acpi_build method.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221115115008.3372489-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* target/arm: Don't do two-stage lookup if stage 2 is disabled
In get_phys_addr_with_struct(), we call get_phys_addr_twostage() if
the CPU supports EL2. However, we don't check here that stage 2 is
actually enabled. Instead we only check that inside
get_phys_addr_twostage() to skip stage 2 translation. This means
that even if stage 2 is disabled we still tell the stage 1 lookup to
do its page table walks via stage 2.
This works by luck for normal CPU accesses, but it breaks for debug
accesses, which are used by the disassembler and also by semihosting
file reads and writes, because the debug case takes a different code
path inside S1_ptw_translate().
This means that setups that use semihosting for file loads are broken
(a regression since 7.1, introduced in recent ptw refactoring), and
that sometimes disassembly in debug logs reports "unable to read
memory" rather than showing the guest insns.
Fix the bug by hoisting the "is stage 2 enabled?" check up to
get_phys_addr_with_struct(), so that we handle S2 disabled the same
way we do the "no EL2" case, with a simple single stage lookup.
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221121212404.1450382-1-peter.maydell@linaro.org
* target/arm: Use signed quantity to represent VMSAv8-64 translation level
The LPA2 extension implements 52-bit virtual addressing for 4k and 16k
translation granules, and for the former, this means an additional level
of translation is needed. This means we start counting at -1 instead of
0 when doing a walk, and so 'level' is now a signed quantity, and should
be typed as such. So turn it from uint32_t into int32_t.
This avoids a level of -1 getting misinterpreted as being >= 3, and
terminating a page table walk prematurely with a bogus output address.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Update VERSION for v7.2.0-rc2
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tests/avocado: Update the URLs of the advent calendar images
The qemu-advent-calendar.org server will be decommissioned soon.
I've mirrored the images that we use for the QEMU CI to gitlab,
so update their URLs to point to the new location.
Message-Id: <20221121102436.78635-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* tests/qtest: Decrease the amount of output from the qom-test
The logs in the gitlab-CI have a size constraint, and sometimes
we already hit this limit. The biggest part of the log then seems
to be filled by the qom-test, so we should decrease the size of
the output - which can be done easily by not printing the path
for each property, since the path has already been logged at the
beginning of each node that we handle here.
However, if we omit the path, we should make sure to not recurse
into child nodes in between, so that it is clear to which node
each property belongs. Thus store the children and links in a
temporary list and recurse only at the end of each node, when
all properties have already been printed.
Message-Id: <20221121194240.149268-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* tests/avocado: use new rootfs for orangepi test
The old URL wasn't stable. I suspect the current URL will only be
stable for a few months so maybe we need another strategy for hosting
rootfs snapshots?
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221118113309.1057790-1-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Revert "usbredir: avoid queuing hello packet on snapshot restore"
Run state is also in RUN_STATE_PRELAUNCH while "-S" is used.
This reverts commit 0631d4b448454ae8a1ab091c447e3f71ab6e088a
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The original commit broke the usage of usbredir with libvirt, which
starts every domain with "-S".
This workaround is no longer needed because the usbredir behavior
has been fixed in the meantime:
https://gitlab.freedesktop.org/spice/usbredir/-/merge_requests/61
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <1689cec3eadcea87255e390cb236033aca72e168.1669193161.git.jtomko@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* gtk: disable GTK Clipboard with a new meson option
The GTK Clipboard implementation may cause guest hangs.
Therefore implement new configure switch: --enable-gtk-clipboard,
as a meson option disabled by default, which warns in the help
text about the experimental nature of the feature.
Regenerate the meson build options to include it.
The initialization of the clipboard is gtk.c, as well as the
compilation of gtk-clipboard.c are now conditional on this new
option to be set.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1150
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Message-Id: <20221121135538.14625-1-cfontana@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/usb/hcd-xhci.c: spelling: tranfer
Fixes: effaf5a240e03020f4ae953e10b764622c3e87cc
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221105114851.306206-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* ui/gtk: prevent ui lock up when dpy_gl_update called again before current draw event occurs
A warning, "qemu: warning: console: no gl-unblock within" followed by
guest scanout lockup can happen if dpy_gl_update is called in a row
and the second call is made before gd_draw_event scheduled by the first
call is taking place. This is because draw call returns without decrementing
gl_block ref count if the dmabuf was already submitted as shown below.
(gd_gl_area_draw/gd_egl_draw)
if (dmabuf) {
if (!dmabuf->draw_submitted) {
return;
} else {
dmabuf->draw_submitted = false;
}
}
So it should not schedule any redundant draw event in case draw_submitted is
already set in gd_egl_fluch/gd_gl_area_scanout_flush.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221021192315.9110-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/usb/hcd-xhci: Reset the XHCIState with device_cold_reset()
Currently the hcd-xhci-pci and hcd-xhci-sysbus devices, which are
mostly wrappers around the TYPE_XHCI device, which is a direct
subclass of TYPE_DEVICE. Since TYPE_DEVICE devices are not on any
qbus and do not get automatically reset, the wrapper devices both
reset the TYPE_XHCI device in their own reset functions. However,
they do this using device_legacy_reset(), which will reset the device
itself but not any bus it has.
Switch to device_cold_reset(), which avoids using a deprecated
function and also propagates reset along any child buses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221014145423.2102706-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/audio/intel-hda: don't reset codecs twice
Currently the intel-hda device has a reset method which manually
resets all the codecs by calling device_legacy_reset() on them. This
means they get reset twice, once because child devices on a qbus get
reset before the parent device's reset method is called, and then
again because we're manually resetting them.
Drop the manual reset call, and ensure that codecs are still reset
when the guest does a reset via ICH6_GCTL_RESET by using
device_cold_reset() (which resets all the devices on the qbus as well
as the device itself) instead of a direct call to the reset function.
This is a slight ordering change because the (only) codec reset now
happens before the controller registers etc are reset, rather than
once before and then once after, but the codec reset function
hda_audio_reset() doesn't care.
This lets us drop a use of device_legacy_reset(), which is
deprecated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221014142632.2092404-2-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/audio/intel-hda: Drop unnecessary prototype
The only use of intel_hda_reset() is after its definition, so we
don't need to separately declare its prototype at the top of the
file; drop the unnecessary line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221014142632.2092404-3-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* add syx snapshot extras
* it compiles!
* virtiofsd: Add `sigreturn` to the seccomp whitelist
The virtiofsd currently crashes on s390x. This is because of a
`sigreturn` system call. See audit log below:
type=SECCOMP msg=audit(1669382477.611:459): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=system_u:system_r:virtd_t:s0-s0:c0.c1023 pid=6649 comm="virtiofsd" exe="/usr/libexec/virtiofsd" sig=31 arch=80000016 syscall=119 compat=0 ip=0x3fff15f748a code=0x80000000AUID="unset" UID="root" GID="root" ARCH=s390x SYSCALL=sigreturn
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221125143946.27717-1-mhartmay@linux.ibm.com>
* libvhost-user: Fix wrong type of argument to formatting function (reported by LGTM)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20220422070144.1043697-2-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-2-sw@weilnetz.de>
* libvhost-user: Fix format strings
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220422070144.1043697-3-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-3-sw@weilnetz.de>
* libvhost-user: Fix two more format strings
This fix is required for 32 bit hosts. The bug was detected by CI
for arm-linux, but is also relevant for i386-linux.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-4-sw@weilnetz.de>
* libvhost-user: Add format attribute to local function vu_panic
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220422070144.1043697-4-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-5-sw@weilnetz.de>
* MAINTAINERS: Add subprojects/libvhost-user to section "vhost"
Signed-off-by: Stefan Weil <sw@weilnetz.de>
[Michael agreed to act as maintainer for libvhost-user via email in
https://lore.kernel.org/qemu-devel/20221123015218-mutt-send-email-mst@kernel.org/.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-6-sw@weilnetz.de>
* Add G_GNUC_PRINTF to function qemu_set_info_str and fix related issues
With the G_GNUC_PRINTF function attribute the compiler detects
two potential insecure format strings:
../../../net/stream.c:248:31: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
qemu_set_info_str(&s->nc, uri);
^~~
../../../net/stream.c:322:31: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
qemu_set_info_str(&s->nc, uri);
^~~
There are also two other warnings:
../../../net/socket.c:182:35: warning: zero-length gnu_printf format string [-Wformat-zero-length]
182 | qemu_set_info_str(&s->nc, "");
| ^~
../../../net/stream.c:170:35: warning: zero-length gnu_printf format string [-Wformat-zero-length]
170 | qemu_set_info_str(&s->nc, "");
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-7-sw@weilnetz.de>
* del ramfile
* update seabios source from 1.16.0 to 1.16.1
git shortlog rel-1.16.0..rel-1.16.1
===================================
Gerd Hoffmann (3):
malloc: use variable for ZoneHigh size
malloc: use large ZoneHigh when there is enough memory
virtio-blk: use larger default request size
Igor Mammedov (1):
acpi: parse Alias object
Volker Rümelin (2):
pci: refactor the pci_config_*() functions
reset: force standard PCI configuration access
Xiaofei Lee (1):
virtio-blk: Fix incorrect type conversion in virtio_blk_op()
Xuan Zhuo (2):
virtio-mmio: read/write the hi 32 features for mmio
virtio: finalize features before using device
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* update seabios binaries to 1.16.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* fix for non i386 archs
* replay: Fix declaration of replay_read_next_clock
Fixes the build with gcc 13:
replay/replay-time.c:34:6: error: conflicting types for \
'replay_read_next_clock' due to enum/integer mismatch; \
have 'void(ReplayClockKind)' [-Werror=enum-int-mismatch]
34 | void replay_read_next_clock(ReplayClockKind kind)
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from ../qemu/replay/replay-time.c:14:
replay/replay-internal.h:139:6: note: previous declaration of \
'replay_read_next_clock' with type 'void(unsigned int)'
139 | void replay_read_next_clock(unsigned int kind);
| ^~~~~~~~~~~~~~~~~~~~~~
Fixes: 8eda206e090 ("replay: recording and replaying clock ticks")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221129010547.284051-1-richard.henderson@linaro.org>
* hw/display/qxl: Have qxl_log_command Return early if no log_cmd handler
Only 3 command types are logged: no need to call qxl_phys2virt()
for the other types. Using different cases will help to pass
different structure sizes to qxl_phys2virt() in a pair of commits.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-2-philmd@linaro.org>
* hw/display/qxl: Document qxl_phys2virt()
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-3-philmd@linaro.org>
* hw/display/qxl: Pass requested buffer size to qxl_phys2virt()
Currently qxl_phys2virt() doesn't check for buffer overrun.
In order to do so in the next commit, pass the buffer size
as argument.
For QXLCursor in qxl_render_cursor() -> qxl_cursor() we
verify the size of the chunked data ahead, checking we can
access 'sizeof(QXLCursor) + chunk->data_size' bytes.
Since in the SPICE_CURSOR_TYPE_MONO case the cursor is
assumed to fit in one chunk, no change are required.
In SPICE_CURSOR_TYPE_ALPHA the ahead read is handled in
qxl_unpack_chunks().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-4-philmd@linaro.org>
* hw/display/qxl: Avoid buffer overrun in qxl_phys2virt (CVE-2022-4144)
Have qxl_get_check_slot_offset() return false if the requested
buffer size does not fit within the slot memory region.
Similarly qxl_phys2virt() now returns NULL in such case, and
qxl_dirty_one_surface() aborts.
This avoids buffer overrun in the host pointer returned by
memory_region_get_ram_ptr().
Fixes: CVE-2022-4144 (out-of-bounds read)
Reported-by: Wenxu Yin (@awxylitol)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1336
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-5-philmd@linaro.org>
* hw/display/qxl: Assert memory slot fits in preallocated MemoryRegion
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-6-philmd@linaro.org>
* block-backend: avoid bdrv_unregister_buf() NULL pointer deref
bdrv_*() APIs expect a valid BlockDriverState. Calling them with bs=NULL
leads to undefined behavior.
Jonathan Cameron reported this following NULL pointer dereference when a
VM with a virtio-blk device and a memory-backend-file object is
terminated:
1. qemu_cleanup() closes all drives, setting blk->root to NULL
2. qemu_cleanup() calls user_creatable_cleanup(), which results in a RAM
block notifier callback because the memory-backend-file is destroyed.
3. blk_unregister_buf() is called by virtio-blk's BlockRamRegistrar
notifier callback and undefined behavior occurs.
Fixes: baf422684d73 ("virtio-blk: use BDRV_REQ_REGISTERED_BUF optimization hint")
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221121211923.1993171-1-stefanha@redhat.com>
* target/arm: Set TCGCPUOps.restore_state_to_opc for v7m
This setting got missed, breaking v7m.
Fixes: 56c6c98df85c ("target/arm: Convert to tcg_ops restore_state_to_opc")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1347
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221129204146.550394-1-richard.henderson@linaro.org>
* Update VERSION for v7.2.0-rc3
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* hooks are now post mem access
* tests/qtests: override "force-legacy" for gpio virtio-mmio tests
The GPIO device is a VIRTIO_F_VERSION_1 devices but running with a
legacy MMIO interface we miss out that feature bit causing confusion.
For the GPIO test force the mmio bus to support non-legacy so we can
properly test it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1333
Message-Id: <20221130112439.2527228-2-alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vhost: enable vrings in vhost_dev_start() for vhost-user devices
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features")
properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user
backend, but we forgot to enable vrings as specified in
docs/interop/vhost-user.rst:
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the
ring starts directly in the enabled state.
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is
initialized in a disabled state and is enabled by
``VHOST_USER_SET_VRING_ENABLE`` with parameter 1.
Some vhost-user front-ends already did this by calling
vhost_ops.vhost_set_vring_enable() directly:
- backends/cryptodev-vhost.c
- hw/net/virtio-net.c
- hw/virtio/vhost-user-gpio.c
But most didn't do that, so we would leave the vrings disabled and some
backends would not work. We observed this issue with the rust version of
virtiofsd [1], which uses the event loop [2] provided by the
vhost-user-backend crate where requests are not processed if vring is
not enabled.
Let's fix this issue by enabling the vrings in vhost_dev_start() for
vhost-user front-ends that don't already do this directly. Same thing
also in vhost_dev_stop() where we disable vrings.
[1] https://gitlab.com/virtio-fs/virtiofsd
[2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217
Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features")
Reported-by: German Maglione <gmaglione@redhat.com>
Tested-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221123131630.52020-1-sgarzare@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/virtio: add started_vu status field to vhost-user-gpio
As per the fix to vhost-user-blk in f5b22d06fb (vhost: recheck dev
state in the vhost_migration_log routine) we really should track the
connection and starting separately.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-4-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/virtio: generalise CHR_EVENT_CLOSED handling
..and use for both virtio-user-blk and virtio-user-gpio. This avoids
the circular close by deferring shutdown due to disconnection until a
later point. virtio-user-blk already had this mechanism in place so
generalise it as a vhost-user helper function and use for both blk and
gpio devices.
While we are at it we also fix up vhost-user-gpio to re-establish the
event handler after close down so we can reconnect later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221130112439.2527228-5-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* include/hw: VM state takes precedence in virtio_device_should_start
The VM status should always preempt the device status for these
checks. This ensures the device is in the correct state when we
suspend the VM prior to migrations. This restores the checks to the
order they where in before the refactoring moved things around.
While we are at it lets improve our documentation of the various
fields involved and document the two functions.
Fixes: 9f6bcfd99f (hw/virtio: move vm_running check to virtio_device_started)
Fixes: 259d69c00b (hw/virtio: introduce virtio_device_should_start)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-6-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/nvme: fix aio cancel in format
There are several bugs in the async cancel code for the Format command.
Firstly, cancelling a format operation neglects to set iocb->ret as well
as clearing the iocb->aiocb after cancelling the underlying aiocb which
causes the aio callback to ignore the cancellation. Trivial fix.
Secondly, and worse, because the request is queued up for posting to the
CQ in a bottom half, if the cancellation is due to the submission queue
being deleted (which calls blk_aio_cancel), the req structure is
deallocated in nvme_del_sq prior to the bottom half being schedulued.
Fix this by simply removing the bottom half, there is no reason to defer
it anyway.
Fixes: 3bcf26d3d619 ("hw/nvme: reimplement format nvm to allow cancellation")
Reported-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: fix aio cancel in flush
Make sure that iocb->aiocb is NULL'ed when cancelling.
Fix a potential use-after-free by removing the bottom half and enqueuing
the completion directly.
Fixes: 38f4ac65ac88 ("hw/nvme: reimplement flush to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: fix aio cancel in zone reset
If the zone reset operation is cancelled but the block unmap operation
completes normally, the callback will continue resetting the next zone
since it neglects to check iocb->ret which will have been set to
-ECANCELED. Make sure that this is checked and bail out if an error is
present.
Secondly, fix a potential use-after-free by removing the bottom half and
enqueuing the completion directly.
Fixes: 63d96e4ffd71 ("hw/nvme: reimplement zone reset to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: fix aio cancel in dsm
When the DSM operation is cancelled asynchronously, we set iocb->ret to
-ECANCELED. However, the callback function only checks the return value
of the completed aio, which may have completed succesfully prior to the
cancellation and thus the callback ends up continuing the dsm operation
instead of bailing out. Fix this.
Secondly, fix a potential use-after-free by removing the bottom half and
enqueuing the completion directly.
Fixes: d7d1474fd85d ("hw/nvme: reimplement dsm to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: remove copy bh scheduling
Fix a potential use-after-free by removing the bottom half and enqueuing
the completion directly.
Fixes: 796d20681d9b ("hw/nvme: reimplement the copy command to allow aio cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* target/i386: allow MMX instructions with CR4.OSFXSR=0
MMX state is saved/restored by FSAVE/FRSTOR so the instructions are
not illegal opcodes even if CR4.OSFXSR=0. Make sure that validate_vex
takes into account the prefix and only checks HF_OSFXSR_MASK in the
presence of an SSE instruction.
Fixes: 20581aadec5e ("target/i386: validate VEX prefixes via the instructions' exception classes", 2022-10-18)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1350
Reported-by: Helge Konetzka (@hejko on gitlab.com)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* target/i386: Always completely initialize TranslateFault
In get_physical_address, the canonical address check failed to
set TranslateFault.stage2, which resulted in an uninitialized
read from the struct when reporting the fault in x86_cpu_tlb_fill.
Adjust all error paths to use structure assignment so that the
entire struct is always initialized.
Reported-by: Daniel Hoffman <dhoff749@gmail.com>
Fixes: 9bbcf372193a ("target/i386: Reorg GET_HPHYS")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221201074522.178498-1-richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1324
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/loongarch/virt: Add cfi01 pflash device
Add cfi01 pflash device for LoongArch virt machine
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221130100647.398565-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* Sync pc on breakpoints
* tests/qtest/migration-test: Fix unlink error and memory leaks
When running the migration test compiled with Clang from Fedora 37
and sanitizers enabled, there is an error complaining about unlink():
../tests/qtest/migration-test.c:1072:12: runtime error: null pointer
passed as argument 1, which is declared to never be null
/usr/include/unistd.h:858:48: note: nonnull attribute specified here
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
../tests/qtest/migration-test.c:1072:12 in
(test program exited with status code 1)
TAP parsing error: Too few tests run (expected 33, got 20)
The data->clientcert and data->clientkey pointers can indeed be unset
in some tests, so we have to check them before calling unlink() with
those.
While we're at it, I also noticed that the code is only freeing
some but not all of the allocated strings in this function, and
indeed, valgrind is also complaining about memory leaks here.
So let's call g_free() on all allocated strings to avoid leaking
memory here.
Message-Id: <20221125083054.117504-1-thuth@redhat.com>
Tested-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* target/s390x/tcg: Fix and improve the SACF instruction
The SET ADDRESS SPACE CONTROL FAST instruction is not privileged, it can be
used from problem space, too. Just the switching to the home address space
is privileged and should still generate a privilege exception. This bug is
e.g. causing programs like Java that use the "getcpu" vdso kernel function
to crash (see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990417#26 ).
While we're at it, also check if DAT is not enabled. In that case the
instruction is supposed to generate a special operation exception.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/655
Message-Id: <20221201184443.136355-1-thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* hw/display/next-fb: Fix comment typo
Signed-off-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Message-Id: <20221125160849.23711-1-evgeny.v.ermakov@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* fix dev snapshots
* working syx snaps
* Revert "hw/loongarch/virt: Add cfi01 pflash device"
This reverts commit 14dccc8ea6ece7ee63273144fb55e4770a05e0fd.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221205113007.683505-1-gaosong@loongson.cn>
* Update VERSION for v7.2.0-rc4
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Co-authored-by: Stefan Weil <sw@weilnetz.de>
Co-authored-by: Cédric Le Goater <clg@kaod.org>
Co-authored-by: Alex Bennée <alex.bennee@linaro.org>
Co-authored-by: Peter Maydell <peter.maydell@linaro.org>
Co-authored-by: Stefano Garzarella <sgarzare@redhat.com>
Co-authored-by: Igor Mammedov <imammedo@redhat.com>
Co-authored-by: Ani Sinha <ani@anisinha.ca>
Co-authored-by: John Snow <jsnow@redhat.com>
Co-authored-by: Michael S. Tsirkin <mst@redhat.com>
Co-authored-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Co-authored-by: Stefan Hajnoczi <stefanha@redhat.com>
Co-authored-by: Ard Biesheuvel <ardb@kernel.org>
Co-authored-by: Thomas Huth <thuth@redhat.com>
Co-authored-by: Joelle van Dyne <j@getutm.app>
Co-authored-by: Claudio Fontana <cfontana@suse.de>
Co-authored-by: Michael Tokarev <mjt@tls.msk.ru>
Co-authored-by: Dongwon Kim <dongwon.kim@intel.com>
Co-authored-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Co-authored-by: Stefan Weil via <qemu-devel@nongnu.org>
Co-authored-by: Gerd Hoffmann <kraxel@redhat.com>
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-authored-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Co-authored-by: Klaus Jensen <k.jensen@samsung.com>
Co-authored-by: Paolo Bonzini <pbonzini@redhat.com>
Co-authored-by: Song Gao <gaosong@loongson.cn>
Run shell script:
cat << EOF | valgrind qemu-system-i386 -display none -machine accel=qtest, -m \
512M -M q35 -nodefaults -device virtio-net,netdev=net0 -netdev \
user,id=net0 -qtest stdio
outl 0xcf8 0x80000810
outl 0xcfc 0xc000
outl 0xcf8 0x80000804
outl 0xcfc 0x01
outl 0xc00d 0x0200
outl 0xcf8 0x80000890
outb 0xcfc 0x4
outl 0xcf8 0x80000889
outl 0xcfc 0x1c000000
outl 0xcf8 0x80000893
outw 0xcfc 0x100
EOF
Got:
==68666== Invalid read of size 8
==68666== at 0x688536: virtio_net_queue_enable (virtio-net.c:575)
==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492)
==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554)
==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521)
==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492)
==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554)
==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521)
==68666== by 0x6EBCD3: flatview_write_continue (physmem.c:2820)
==68666== by 0x6EBFBF: flatview_write (physmem.c:2862)
==68666== by 0x6EF5E7: address_space_write (physmem.c:2958)
==68666== by 0x6DFDEC: cpu_outw (ioport.c:70)
==68666== by 0x6F6DF0: qtest_process_command (qtest.c:480)
==68666== Address 0x29087fe8 is 24 bytes after a block of size 416 in arena "client"
That is reported by Alexander Bulekov. https://gitlab.com/qemu-project/qemu/-/issues/1309
Here, the queue_index is the index of the cvq, but in some cases cvq
does not have the corresponding NetClientState, so overflow appears.
I add a check here, ignore illegal queue_index and cvq queue_index.
Note the queue_index is below the VIRTIO_QUEUE_MAX but greater or equal
than cvq index could hit this. Other devices are similar.
Fixes: 7f863302 ("virtio-net: support queue_enable")
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1309
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20221110095739.130393-1-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous fix to virtio_device_started revealed a problem in its
use by both the core and the device code. The core code should be able
to handle the device "starting" while the VM isn't running to handle
the restoration of migration state. To solve this duel use introduce a
new helper for use by the vhost-user backends who all use it to feed a
should_start variable.
We can also pick up a change vhost_user_blk_set_status while we are at
it which follows the same pattern.
Fixes: 9f6bcfd99f (hw/virtio: move vm_running check to virtio_device_started)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Message-Id: <20221107121407.1010913-1-alex.bennee@linaro.org>
Expose vhost_virtqueue_stop(), we need to use it when resetting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-9-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose vhost_virtqueue_start(), we need to use it when restarting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-8-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI devices support vq reset.
Based on this function, the driver can adjust the size of the ring, and
quickly recycle the buffer in the ring.
The migration of the virtio devices will not happen during a reset
operation. This is becuase the global iothread lock is held. Migration
thread also needs the lock. As a result, when migration of virtio
devices starts, the 'reset' status of VirtIOPCIQueue will always be 0.
Thus, we do not need to add it in vmstate_virtio_pci_modern_queue_state.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-6-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A a new command line parameter "queue_reset" is added.
Meanwhile, the vq reset feature is disabled for pre-7.2 machines.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-5-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the interface queue_enable() in VirtioDeviceClass and the
fucntion virtio_queue_enable() in virtio, it can be called when
VIRTIO_PCI_COMMON_Q_ENABLE is written and related virtqueue can be
started. It only supports the devices of virtio 1 or later. The
not-supported devices can only start the virtqueue when DRIVER_OK.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-4-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new interface function virtio_queue_reset() to implement
reset for vq.
Add a new callback to VirtioDeviceClass for queue reset operation for
each child device.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-3-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Register guest RAM using BlockRAMRegistrar and set the
BDRV_REQ_REGISTERED_BUF flag so block drivers can optimize memory
accesses in I/O requests.
This is for vdpa-blk, vhost-user-blk, and other I/O interfaces that rely
on DMA mapping/unmapping.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20221013185908.1297568-14-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Display feature names instead of bitmaps for host, guest, and
backend for VirtIODevices.
Display status names instead of bitmaps for VirtIODevices.
Display feature names instead of bitmaps for backend, protocol,
acked, and features (hdev->features) for vhost devices.
Decode features according to device ID. Decode statuses
according to configuration status bitmap (config_status_map).
Decode vhost user protocol features according to vhost user
protocol bitmap (vhost_user_protocol_map).
Transport features are on the first line. Undecoded bits (if
any) are stored in a separate field.
[Jonah: Several changes made to this patch from prev. version (v14):
- Moved all device features mappings to hw/virtio/virtio.c
- Renamed device features mappings (less generic)
- Generalized @FEATURE_ENTRY macro for all device mappings
- Virtio device feature map definitions include descriptions of
feature bits
- Moved @VHOST_USER_F_PROTOCOL_FEATURES feature bit from transport
feature map to vhost-user-supported device feature mappings
(blk, fs, i2c, rng, net, gpu, input, scsi, vsock)
- New feature bit added for virtio-vsock: @VIRTIO_VSOCK_F_SEQPACKET
- New feature bit added for virtio-iommu: @VIRTIO_IOMMU_F_BYPASS_CONFIG
- New feature bit added for virtio-mem: @VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
- New virtio transport feature bit added: @VIRTIO_F_IN_ORDER
- Added device feature map definition for virtio-rng
]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-4-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new command lists all the instances of VirtIODevices with
their canonical QOM path and name.
[Jonah: @virtio_list duplicates information that already exists in
the QOM composition tree. However, extracting necessary information
from this tree seems to be a bit convoluted.
Instead, we still create our own list of realized virtio devices
but use @qmp_qom_get with the device's canonical QOM path to confirm
that the device exists and is realized. If the device exists but
is actually not realized, then we remove it from our list (for
synchronicity to the QOM composition tree).
Also, the QMP command @x-query-virtio is redundant as @qom-list
and @qom-get are sufficient to search '/machine/' for realized
virtio devices. However, @x-query-virtio is much more convenient
in listing realized virtio devices.]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No reason to have this be a separate field. This also makes it more akin
to what the virtio-blk device does.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-5-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we can reuse it for other virtio-blk devices, e.g
vhost-user-blk, which currently does not control its config space size
dynamically.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-3-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the first step towards moving all device config size calculation
logic into the virtio core code. In particular, this adds a struct that
contains all the necessary information for common virtio code to be able
to calculate the final config size for a device. This is expected to be
used with the new virtio_get_config_size helper, which calculates the
final length based on the provided host features.
This builds on top of already existing code like VirtIOFeature and
virtio_feature_get_config_size(), but adds additional fields, as well as
sanity checking so that device-specifc code doesn't have to duplicate it.
An example usage would be:
static const VirtIOFeature dev_features[] = {
{.flags = 1ULL << FEATURE_1_BIT,
.end = endof(struct virtio_dev_config, feature_1)},
{.flags = 1ULL << FEATURE_2_BIT,
.end = endof(struct virtio_dev_config, feature_2)},
{}
};
static const VirtIOConfigSizeParams dev_cfg_size_params = {
.min_size = DEV_BASE_CONFIG_SIZE,
.max_size = sizeof(struct virtio_dev_config),
.feature_sizes = dev_features
};
// code inside my_dev_device_realize()
size_t config_size = virtio_get_config_size(&dev_cfg_size_params,
host_features);
virtio_init(vdev, VIRTIO_ID_MYDEV, config_size);
Currently every device is expected to write its own boilerplate from the
example above in device_realize(), however, the next step of this
transition is moving VirtIOConfigSizeParams into VirtioDeviceClass,
so that it can be done automatically by the virtio initialization code.
All of the users of virtio_feature_get_config_size have been converted
to use virtio_get_config_size so it's no longer needed and is removed
with this commit.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20220906073111.353245-2-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-gpio device which connects
to the remote daemon. It is based of vhost-user-i2c code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <5390324a748194a21bc99b1538e19761a8c64092.1641987128.git.viresh.kumar@linaro.org>
[AJB: fixes for qtest, tweaks to feature bits]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220802095010.3330793-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The `started` field is manipulated internally within the vhost code
except for one place, vhost-user-blk via f5b22d06fb (vhost: recheck
dev state in the vhost_migration_log routine). Mark that as a FIXME
because it introduces a potential race. I think the referenced fix
should be tracking its state locally.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwittz@nutanix.com>
All the boilerplate virtio code does the same thing (or should at
least) of checking to see if the VM is running before attempting to
start VirtIO. Push the logic up to the common function to avoid
getting a copy and paste wrong.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Try and explicitly document the various state of feature bits as
related to the vhost_dev structure. Importantly the backend_features
can advertise things like VHOST_USER_F_PROTOCOL_FEATURES which is
never exposed to the driver and is only present in the vhost-user
feature negotiation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220802095010.3330793-7-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When debugging a new vhost user you may be surprised to see
VHOST_USER_F_PROTOCOL getting squashed in the maze of
backend_features, acked_features and guest_features. Expand the
description here to help the next poor soul trying to work through
this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We can restore the device state in the destination via CVQ now. Remove
the migration blocker.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since the vhost-vdpa device is exposing _F_LOG, adding a migration blocker if
it uses CVQ.
However, qemu is able to migrate simple devices with no CVQ as long as
they use SVQ. To allow it, add a placeholder error to vhost_vdpa, and
only add to vhost_dev when used. vhost_dev machinery place the migration
blocker if needed.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do a simple forwarding of CVQ buffers, the same work SVQ could do but
through callbacks. No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Shadow CVQ will copy buffers on qemu VA, so we avoid TOCTOU attacks from
the guest that could set a different state in qemu device model and vdpa
device.
To do so, it needs to be able to map these new buffers to the device.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows external vhost-net devices to modify the state of the
VirtIO device model once the vhost-vdpa device has acknowledged the
control commands.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vhost-vdpa control virtqueue needs to know the maximum entries supported
by the virtio-net device, so we know if it is possible to apply the
filter.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220524154056.2896913-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220524154056.2896913-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Vhost has error notifications, let's log them like other errors.
For each virt-queue setup eventfd for vring error notifications.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
[vsementsov: rename patch, change commit message and dump error like
other errors in the file]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220623161325.18813-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Kernel and user vhost may report virtqueue errors via eventfd.
This is only reliable way to get notification about protocol error.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Message-Id: <20220623161325.18813-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
There are two parts in this patch:
1, support akcipher service by cryptodev-builtin driver
2, virtio-crypto driver supports akcipher service
In principle, we should separate this into two patches, to avoid
compiling error, merge them into one.
Then virtio-crypto gets request from guest side, and forwards the
request to builtin driver to handle it.
Test with a guest linux:
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
- both public key & private key
- create/close session
- encrypt/decrypt/sign/verify basic driver operation
- also test with kernel crypto layer(pkey add/query)
All the cases work fine.
Run script in guest:
rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=20
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
echo "Enc with priv key..."
keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
echo "Dec with pub key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Sign with priv key..."
keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
echo "Verify with pub key..."
keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
echo "Enc with pub key..."
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
echo "Dec with priv key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Verify with pub key..."
keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: lei he <helei.sig11@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When switching address space with mutex lock hold, mapping will be
replayed for assigned device. This will trigger relock deadlock.
Also release the mutex resource in unrealize routine.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-3-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently assigned devices can not work in virtio-iommu bypass mode.
Guest driver fails to probe the device due to DMA failure. And the
reason is because of lacking GPA -> HPA mappings when VM is created.
Add a root container memory region to hold both bypass memory region
and iommu memory region, so the switch between them is supported
just like the implementation in virtual VT-d.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220613061010.2674054-2-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds a get_vhost() callback function for VirtIODevices that
returns the device's corresponding vhost_dev structure, if the vhost
device is running. This patch also adds a vhost_started flag for
VirtIODevices.
Previously, a VirtIODevice wouldn't be able to tell if its corresponding
vhost device was active or not.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch drops the name parameter for the virtio_init function.
The pair between the numeric device ID and the string device ID
(name) of a virtio device already exists, but not in a way that
lets us map between them.
This patch lets us do this and removes the need for the name
parameter in the virtio_init function.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At a couple of hundred bytes per notifier allocating one for every
potential queue is very wasteful as most devices only have a few
queues. Instead of having this handled statically dynamically assign
them and track in a GPtrArray.
[AJB: it's hard to trigger the vhost notifiers code, I assume as it
requires a KVM guest with appropriate backend]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-14-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously we would silently suppress VHOST_USER_PROTOCOL_F_CONFIG
during the protocol negotiation if the QEMU stub hadn't implemented
the vhost_dev_config_notifier. However this isn't the only way we can
handle config messages, the existing vdc->get/set_config can do this
as well.
Lightly re-factor the code to check for both potential methods and
instead of silently squashing the feature error out. It is unlikely
that a vhost-user backend expecting to handle CONFIG messages will
behave correctly if they never get sent.
Fixes: 1c3e5a2617 ("vhost-user: back SET/GET_CONFIG requests with a protocol feature")
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While trying to get my head around the nest of interactions for vhost
devices I though I could start by documenting the key API functions.
This patch documents the main API hooks for creating and starting a
vhost device as well as how the configuration changes are handled.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220321153037.3622127-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows other device classes that will be exposed via PCI to be
able to do so in the appropriate hw/ directory. I resisted the
temptation to re-order headers to be more aesthetically pleasing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200925125147.26943-4-alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
There is no longer a need to expose the request and related APIs in
virtio-scsi.h since there are no callers outside virtio-scsi.c.
Note the block comment in VirtIOSCSIReq has been adjusted to meet the
coding style.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_cmd_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_ctrl_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_event_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-scsi event virtqueue is not emptied by its handler function.
This is typical for rx virtqueues where the device uses buffers when
some event occurs (e.g. a packet is received, an error condition
happens, etc).
Polling non-empty virtqueues wastes CPU cycles. We are not waiting for
new buffers to become available, we are waiting for an event to occur,
so it's a misuse of CPU resources to poll for buffers.
Introduce the new virtio_queue_aio_attach_host_notifier_no_poll() API,
which is identical to virtio_queue_aio_attach_host_notifier() except
that it does not poll the virtqueue.
Before this patch the following command-line consumed 100% CPU in the
IOThread polling and calling virtio_scsi_handle_event():
$ qemu-system-x86_64 -M accel=kvm -m 1G -cpu host \
--object iothread,id=iothread0 \
--device virtio-scsi-pci,iothread=iothread0 \
--blockdev file,filename=test.img,aio=native,cache.direct=on,node-name=drive0 \
--device scsi-hd,drive=drive0
After this patch CPU is no longer wasted.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20220427143541.119567-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vhost-scsi and vhost-user-scsi are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features. Compute their default value in Kconfig to
obtain the more intuitive behavior.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Andrea Fioraldi