Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX). Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.
In fact, the same limit applies to SG_IO as well. To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs. This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit cc071629539dc1f303175a7e2d4ab854c0a8b20f)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Change caf108bc58790 ("hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35")
selects an IO address range for acpi based PCI hotplug for q35 arbitrarily. It
starts at address 0x0cc4 and ends at 0x0cdb. At the time when the patch was
written but the final version of the patch was not yet pushed upstream, this
address range was free and did not conflict with any other IO address ranges.
However, with the following change, this address range was no
longer conflict free as in this change, the IO address range
(value of ACPI_PCIHP_SIZE) was incremented by four bytes:
b32bd763a1ca92 ("pci: introduce acpi-index property for PCI device")
This can be seen from the output of QMP command 'info mtree' :
0000000000000600-0000000000000603 (prio 0, i/o): acpi-evt
0000000000000604-0000000000000605 (prio 0, i/o): acpi-cnt
0000000000000608-000000000000060b (prio 0, i/o): acpi-tmr
0000000000000620-000000000000062f (prio 0, i/o): acpi-gpe0
0000000000000630-0000000000000637 (prio 0, i/o): acpi-smi
0000000000000cc4-0000000000000cdb (prio 0, i/o): acpi-pci-hotplug
0000000000000cd8-0000000000000ce3 (prio 0, i/o): acpi-cpu-hotplug
It shows that there is a region of conflict between IO regions of acpi
pci hotplug and acpi cpu hotplug.
Unfortunately, the change caf108bc58790 did not update the IO address range
appropriately before it was pushed upstream to accommodate the increased
length of the IO address space introduced in change b32bd763a1ca92.
Due to this bug, windows guests complain 'This device cannot find
enough free resources it can use' in the device manager panel for extended
IO buses. This issue also breaks the correct functioning of pci hotplug as the
following shows that the IO space for pci hotplug has been truncated:
(qemu) info mtree -f
FlatView #0
AS "I/O", root: io
Root memory region: io
0000000000000cc4-0000000000000cd7 (prio 0, i/o): acpi-pci-hotplug
0000000000000cd8-0000000000000cf7 (prio 0, i/o): acpi-cpu-hotplug
Therefore, in this fix, we adjust the IO address range for the acpi pci
hotplug so that it does not conflict with cpu hotplug and there is no
truncation of IO spaces. The starting IO address of PCI hotplug region
has been decremented by four bytes in order to accommodate four byte
increment in the IO address space introduced by change
b32bd763a1ca92 ("pci: introduce acpi-index property for PCI device")
After fixing, the following are the corrected IO ranges:
0000000000000600-0000000000000603 (prio 0, i/o): acpi-evt
0000000000000604-0000000000000605 (prio 0, i/o): acpi-cnt
0000000000000608-000000000000060b (prio 0, i/o): acpi-tmr
0000000000000620-000000000000062f (prio 0, i/o): acpi-gpe0
0000000000000630-0000000000000637 (prio 0, i/o): acpi-smi
0000000000000cc0-0000000000000cd7 (prio 0, i/o): acpi-pci-hotplug
0000000000000cd8-0000000000000ce3 (prio 0, i/o): acpi-cpu-hotplug
This change has been tested using a Windows Server 2019 guest VM. Windows
no longer complains after this change.
Fixes: caf108bc58790 ("hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/561
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20210916132838.3469580-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 0e780da76a6fe283a20283856718bca3986c104f)
Signed-off-by: Michael Roth <michael.roth@amd.com>
We are going to commit a change to fix IO address range allocated for acpi pci
hotplug in q35. This affects DSDT tables. This change allows DSDT table
modification so that unit tests are not broken.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210916132838.3469580-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9f29e872d5b3973003701401cf659cfb71c95013)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Since commit d8fb7d0969d5 ("vl: switch -M parsing to keyval"), machine
parameter definitions cannot use underscores, because keyval_dashify()
transforms them to dashes and the parser doesn't find the parameter.
This affects option default_bus_bypass_iommu which was introduced in the
same release:
$ qemu-system-x86_64 -M q35,default_bus_bypass_iommu=on
qemu-system-x86_64: Property 'pc-q35-6.1-machine.default-bus-bypass-iommu' not found
Rename the parameter to "default-bus-bypass-iommu". Passing
"default_bus_bypass_iommu" is still valid since the underscore are
transformed automatically.
Fixes: c9e96b04fc19 ("hw/i386: Add a default_bus_bypass_iommu pc machine option")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211025104737.1560274-1-jean-philippe@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 739b38630c45585cd9d372d44537f69c0b2b4346)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Since commit d8fb7d0969d5 ("vl: switch -M parsing to keyval"), machine
parameter definitions cannot use underscores, because keyval_dashify()
transforms them to dashes and the parser doesn't find the parameter.
This affects option default_bus_bypass_iommu which was introduced in the
same release:
$ qemu-system-aarch64 -M virt,default_bus_bypass_iommu=on
qemu-system-aarch64: Property 'virt-6.1-machine.default-bus-bypass-iommu' not found
Rename the parameter to "default-bus-bypass-iommu". Passing
"default_bus_bypass_iommu" is still valid since the underscore are
transformed automatically.
Fixes: 6d7a85483a06 ("hw/arm/virt: Add default_bus_bypass_iommu machine option")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211026093733.2144161-1-jean-philippe@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 9dad363a223df8269175d218413aa8cd265e078e)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Commit 1e08fd0a46 ("vhost-vsock: SOCK_SEQPACKET feature bit support")
enabled the SEQPACKET feature bit.
This commit is released with QEMU 6.1, so if we try to migrate a VM where
the host kernel supports SEQPACKET but machine type version is less than
6.1, we get the following errors:
Features 0x130000002 unsupported. Allowed features: 0x179000000
Failed to load virtio-vhost_vsock:virtio
error while loading state for instance 0x0 of device '0000:00:05.0/virtio-vhost_vsock'
load of migration failed: Operation not permitted
Let's disable the feature bit for machine types < 6.1.
We add a new OnOffAuto property for this, called `seqpacket`.
When it is `auto` (default), QEMU behaves as before, trying to enable the
feature, when it is `on` QEMU will fail if the backend (vhost-vsock
kernel module) doesn't support it.
Fixes: 1e08fd0a46 ("vhost-vsock: SOCK_SEQPACKET feature bit support")
Cc: qemu-stable@nongnu.org
Reported-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210921161642.206461-2-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit d6a9378f47515c6d70dbff4912c5740c98709880)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Commit 4cfd970ec188558daa6214f26203fe553fb1e01f added an
assert which ensures the path within an address of a unix
socket returned from the kernel is at least one byte and
does not exceed sun_path buffer. Both of this constraints
are wrong:
A unix socket can be unnamed, in this case the path is
completely empty (not even \0)
And some implementations (notable linux) can add extra
trailing byte (\0) _after_ the sun_path buffer if we
passed buffer larger than it (and we do).
So remove the assertion (since it causes real-life breakage)
but at the same time fix the usage of sun_path. Namely,
we should not access sun_path[0] if kernel did not return
it at all (this is the case for unnamed sockets),
and use the returned salen when copyig actual path as an
upper constraint for the amount of bytes to copy - this
will ensure we wont exceed the information provided by
the kernel, regardless whenever there is a trailing \0
or not. This also helps with unnamed sockets.
Note the case of abstract socket, the sun_path is actually
a blob and can contain \0 characters, - it should not be
passed to g_strndup and the like, it should be accessed by
memcpy-like functions.
Fixes: 4cfd970ec188558daa6214f26203fe553fb1e01f
Fixes: http://bugs.debian.org/993145
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
CC: qemu-stable@nongnu.org
(cherry picked from commit 118d527f2e4baec5fe8060b22a6212468b8e4d3f)
Signed-off-by: Michael Roth <michael.roth@amd.com>
On Mac --enable-modules and --enable-plugins are currently incompatible, because the
Apple -Wl,-exported_symbols_list command line options prevents the export of any
symbols needed by the modules. On x86 -Wl,--dynamic-list does not have this effect,
but only because the -Wl,--export-dynamic option provided by gmodule-2.0.pc overrides
it. On Apple there is no -Wl,--export-dynamic, because it is the default, and thus
no override.
Either way, when modules are active there is no reason to include the plugin_ldflags.
While at it, avoid the useless -Wl,--export-dynamic when --enable-plugins is
specified but --enable-modules is not; this way, the GNU and Apple configurations
are more similar.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/516
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: fix noexport to no-export]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210811100550.54714-1-pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit b906acace2d4f68b6ff8de73739a773cc4851436)
Signed-off-by: Michael Roth <michael.roth@amd.com>
v9fs_walk() utilizes the v9fs_co_run_in_worker({...}) macro to run the
supplied fs driver code block on a background worker thread.
When either the 'Twalk' client request was interrupted or if the client
requested fid for that 'Twalk' request caused a stat error then that
fs driver code block was left by 'break' keyword, with the intention to
return from worker thread back to main thread as well:
v9fs_co_run_in_worker({
if (v9fs_request_cancelled(pdu)) {
err = -EINTR;
break;
}
err = s->ops->lstat(&s->ctx, &dpath, &fidst);
if (err < 0) {
err = -errno;
break;
}
...
});
However that 'break;' statement also skipped the v9fs_co_run_in_worker()
macro's final and mandatory
/* re-enter back to qemu thread */
qemu_coroutine_yield();
call and thus caused the rest of v9fs_walk() to be continued being
executed on the worker thread instead of main thread, eventually
leading to a crash in the transport virtio transport driver.
To fix this issue and to prevent the same error from happening again by
other users of v9fs_co_run_in_worker() in future, auto wrap the supplied
code block into its own
do { } while (0);
loop inside the 'v9fs_co_run_in_worker' macro definition.
Full discussion and backtrace:
https://lists.gnu.org/archive/html/qemu-devel/2021-08/msg05209.htmlhttps://lists.gnu.org/archive/html/qemu-devel/2021-09/msg00174.html
Fixes: 8d6cb100731c4d28535adbf2a3c2d1f29be3fef4
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1mLTBg-0002Bh-2D@lizzy.crudebyte.com>
(cherry picked from commit f83df00900816476cca41bb536e4d532b297d76e)
Signed-off-by: Michael Roth <michael.roth@amd.com>
The AVX_VNNI feature is not in Cooperlake platform, remove it
from cpu model.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210820054611.84303-1-yang.zhong@intel.com>
Fixes: c1826ea6a052 ("i386/cpu: Expose AVX_VNNI instruction to guest")
Cc: qemu-stable@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit f429dbf8fc526a9cacf531176b28d0c65701475a)
Signed-off-by: Michael Roth <michael.roth@amd.com>
The CDE desktop on HP-UX 10 shows wrongly rendered pixels when the local screen
menu is closed. This bug was introduced by commit c7050f3f167b
("hw/display/artist: Refactor x/y coordination extraction") which converted the
coordinate extraction in artist_vram_read() and artist_vram_write() to use the
ADDR_TO_X and ADDR_TO_Y macros, but forgot to right-shift the address by 2 as
it was done before.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: c7050f3f167b ("hw/display/artist: Refactor x/y coordination extraction")
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <YK1aPb8keur9W7h2@ls3530>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 01f750f5fef1afd8f6abc0548910f87d473e26d5)
Signed-off-by: Michael Roth <michael.roth@amd.com>
We end up not copying the mmap_addr of all existing regions, resulting
in a SEGFAULT once we actually try to map/access anything within our
memory regions.
Fixes: 875b9fd97b34 ("Support individual region unmap in libvhost-user")
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211011201047.62587-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 6889eb2d431ae962e3e083b57bff47cd573cb1c4)
Signed-off-by: Michael Roth <michael.roth@amd.com>
In case of device resume after suspend, VQ notifier MR still valid.
Duplicated registrations explode memory block list and slow down device
resume.
Fixes: 44866521bd6e ("vhost-user: support registering external host notifiers")
Cc: tiwei.bie@intel.com
Cc: qemu-stable@nongnu.org
Cc: Yuwei Zhang <zhangyuwei.9149@bytedance.com>
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Message-Id: <20211008080215.590292-1-xuemingl@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a1ed9ef1de87c3e86ff68589604298ec90875a14)
Signed-off-by: Michael Roth <michael.roth@amd.com>
The device uses the guest-supplied stream number unchecked, which can
lead to guest-triggered out-of-band access to the UASDevice->data3 and
UASDevice->status3 fields. Add the missing checks.
Fixes: CVE-2021-3713
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: Chen Zhe <chenzhe@huawei.com>
Reported-by: Tan Jingguo <tanjingguo@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210818120505.1258262-2-kraxel@redhat.com>
(cherry picked from commit 13b250b12ad3c59114a6a17d59caf073ce45b33a)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Apparently, we don't have to duplicate the string.
Fixes: 722a3c783ef4 ("virtio-pci: Send qapi events when the virtio-mem size changes")
Cc: qemu-stable@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210929162445.64060-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 75b98cb9f6456ccf194211beffcbf93b0a995fa4)
Signed-off-by: Michael Roth <michael.roth@amd.com>
HMP command "change vnc" can take the password as argument, or prompt
for it:
(qemu) change vnc password 123
(qemu) change vnc password
Password: ***
(qemu)
This regressed in commit cfb5387a1d "hmp: remove "change vnc TARGET"
command", v6.0.0.
(qemu) change vnc passwd 123
Password: ***
(qemu) change vnc passwd
(qemu)
The latter passes NULL to qmp_change_vnc_password(), which is a no-no.
Looks like it puts the display into "password required, but none set"
state.
The logic error is easy to miss in review, but testing should've
caught it.
Fix the obvious way.
Fixes: cfb5387a1de2acda23fb5c97d2378b9e7ddf8025
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210909081219.308065-2-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
(cherry picked from commit 6193344f9337f8b76cd44ce94a32c9900d907d35)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Both qemu and qemu-img use writeback cache mode by default, which is
already documented in qemu(1). qemu-nbd uses writethrough cache mode by
default, and the default cache mode is not documented.
According to the qemu-nbd(8):
--cache=CACHE
The cache mode to be used with the file. See the
documentation of the emulator's -drive cache=... option for
allowed values.
qemu(1) says:
The default mode is cache=writeback.
So users have no reason to assume that qemu-nbd is using writethough
cache mode. The only hint is the painfully slow writing when using the
defaults.
Looking in git history, it seems that qemu used writethrough in the past
to support broken guests that did not flush data properly, or could not
flush due to limitations in qemu. But qemu-nbd clients can use
NBD_CMD_FLUSH to flush data, so using writethrough does not help anyone.
Change the default cache mode to writback, and document the default and
available values properly in the online help and manual.
With this change converting image via qemu-nbd is 3.5 times faster.
$ qemu-img create dst.img 50g
$ qemu-nbd -t -f raw -k /tmp/nbd.sock dst.img
Before this change:
$ hyperfine -r3 "./qemu-img convert -p -f raw -O raw -T none -W fedora34.img nbd+unix:///?socket=/tmp/nbd.sock"
Benchmark #1: ./qemu-img convert -p -f raw -O raw -T none -W fedora34.img nbd+unix:///?socket=/tmp/nbd.sock
Time (mean ± σ): 83.639 s ± 5.970 s [User: 2.733 s, System: 6.112 s]
Range (min … max): 76.749 s … 87.245 s 3 runs
After this change:
$ hyperfine -r3 "./qemu-img convert -p -f raw -O raw -T none -W fedora34.img nbd+unix:///?socket=/tmp/nbd.sock"
Benchmark #1: ./qemu-img convert -p -f raw -O raw -T none -W fedora34.img nbd+unix:///?socket=/tmp/nbd.sock
Time (mean ± σ): 23.522 s ± 0.433 s [User: 2.083 s, System: 5.475 s]
Range (min … max): 23.234 s … 24.019 s 3 runs
Users can avoid the issue by using --cache=writeback[1] but the defaults
should give good performance for the common use case.
[1] https://bugzilla.redhat.com/1990656
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-Id: <20210813205519.50518-1-nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 09615257058a0ae87b837bb041f56f7312d9ead8)
Signed-off-by: Michael Roth <michael.roth@amd.com>
When mergeable buffer is enabled, we try to set the num_buffers after
the virtqueue elem has been unmapped. This will lead several issues,
E.g a use after free when the descriptor has an address which belongs
to the non direct access region. In this case we use bounce buffer
that is allocated during address_space_map() and freed during
address_space_unmap().
Fixing this by storing the elems temporarily in an array and delay the
unmap after we set the the num_buffers.
This addresses CVE-2021-3748.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: fbe78f4f55c6 ("virtio-net support")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit bedd7e93d01961fcb16a97ae45d93acf357e11f6)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Currently all of the M-profile specific code in arm_cpu_reset() is
inside a !defined(CONFIG_USER_ONLY) ifdef block. This is
unintentional: it happened because originally the only
M-profile-specific handling was the setup of the initial SP and PC
from the vector table, which is system-emulation only. But then we
added a lot of other M-profile setup to the same "if (ARM_FEATURE_M)"
code block without noticing that it was all inside a not-user-mode
ifdef. This has generally been harmless, but with the addition of
v8.1M low-overhead-loop support we ran into a problem: the reset of
FPSCR.LTPSIZE to 4 was only being done for system emulation mode, so
if a user-mode guest tried to execute the LE instruction it would
incorrectly take a UsageFault.
Adjust the ifdefs so only the really system-emulation specific parts
are covered. Because this means we now run some reset code that sets
up initial values in the FPCCR and similar FPU related registers,
explicitly set up the registers controlling FPU context handling in
user-emulation mode so that the FPU works by design and not by
chance.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/613
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210914120725.24992-2-peter.maydell@linaro.org
(cherry picked from commit b62ceeaf8096fdbbbfdc6087da0028bc4a4dd77e)
Signed-off-by: Michael Roth <michael.roth@amd.com>
Postcopy never worked properly with 'free-page-hint=on', as there are
at least two issues:
1) With postcopy, the guest will never receive a VIRTIO_BALLOON_CMD_ID_DONE
and consequently won't release free pages back to the OS once
migration finishes.
The issue is that for postcopy, we won't do a final bitmap sync while
the guest is stopped on the source and
virtio_balloon_free_page_hint_notify() will only call
virtio_balloon_free_page_done() on the source during
PRECOPY_NOTIFY_CLEANUP, after the VM state was already migrated to
the destination.
2) Once the VM touches a page on the destination that has been excluded
from migration on the source via qemu_guest_free_page_hint() while
postcopy is active, that thread will stall until postcopy finishes
and all threads are woken up. (with older Linux kernels that won't
retry faults when woken up via userfaultfd, we might actually get a
SEGFAULT)
The issue is that the source will refuse to migrate any pages that
are not marked as dirty in the dirty bmap -- for example, because the
page might just have been sent. Consequently, the faulting thread will
stall, waiting for the page to be migrated -- which could take quite
a while and result in guest OS issues.
While we could fix 1) comparatively easily, 2) is harder to get right and
might require more involved RAM migration changes on source and destination
[1].
As it never worked properly, let's not start free page hinting in the
precopy notifier if the postcopy migration capability was enabled to fix
it easily. Capabilities cannot be enabled once migration is already
running.
Note 1: in the future we might either adjust migration code on the source
to track pages that have actually been sent or adjust
migration code on source and destination to eventually send
pages multiple times from the source and and deal with pages
that are sent multiple times on the destination.
Note 2: virtio-mem has similar issues, however, access to "unplugged"
memory by the guest is very rare and we would have to be very
lucky for it to happen during migration. The spec states
"The driver SHOULD NOT read from unplugged memory blocks ..."
and "The driver MUST NOT write to unplugged memory blocks".
virtio-mem will move away from virtio_balloon_free_page_done()
soon and handle this case explicitly on the destination.
[1] https://lkml.kernel.org/r/e79fd18c-aa62-c1d8-c7f3-ba3fc2c25fc8@redhat.com
Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Cc: qemu-stable@nongnu.org
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210708095339.20274-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit fd51e54fa10221e5a8add894c38cc1cf199f4bc4)
Signed-off-by: Michael Roth <michael.roth@amd.com>
When adding RAM_NORESERVE, we forgot to remove the old assertion when
adding the updated one, most probably when reworking the patches or
rebasing. We can easily crash QEMU by adding
-object memory-backend-ram,id=mem0,size=500G,reserve=off
to the QEMU cmdline:
qemu-system-x86_64: ../softmmu/physmem.c:2146: qemu_ram_alloc_internal:
Assertion `(ram_flags & ~(RAM_SHARED | RAM_RESIZEABLE | RAM_PREALLOC))
== 0' failed.
Fix it by removing the old assertion.
Fixes: 8dbe22c6868b ("memory: Introduce RAM_NORESERVE and wire it up in qemu_ram_mmap()")
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-id: 20210805092350.31195-1-david@redhat.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 1e63fe685804 ("machine: pass QAPI struct to mc->smp_parse")
introduced documentation stating that a zero input value for an SMP
parameter indicates that its value should be automatically configured.
This is indeed how things work today, but we'd like to change that.
Avoid documenting behaviors we want to leave undefined for the time
being, giving us freedom to change it later.
Fixes: 1e63fe685804 ("machine: pass QAPI struct to mc->smp_parse")
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't allocate the string until error conditions have been checked
Fixes: a00cfed0e ("Hexagon (disas) disassembler")
Eliminate Coverity CID 1460121 (Resource leak)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJhFeDkAAoJEHsCRPsS3kQiCTsH/RvpPwHd+Nkm+nnueTUbOWfJ
Jra+JUzuu7bNYwrFJcQUoetbplUXqDgHnY5VBaAltrgInaZ1Xt/QtWWNBdDc2MU6
WEs5JWAZn4/3mWaglZZ8ESDx/OjCKunfYYR6fZSlXG4WgVER6O8+A+ri0h3TWoRw
i/WzlvAROB3bUDvum+tqskT3zkH73NgHCcJhVAG/FiV232aDR9TJMN+OlgZ8n32Y
tnfSeATTZos6ms9em1kI4ccM8KWemehnxCY+GvohMdcnxF3kvsxyWgbUfcY3JuKz
4OVnXyGZhDD5ow1ORQcqlvF1MiIst1EbKtImNifalG39lMRCTpwupWIzggo7AuA=
=SZsl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20210812' into staging
Hexagon (disas/hexagon.c) fix memory leak for early exit
Don't allocate the string until error conditions have been checked
Fixes: a00cfed0e ("Hexagon (disas) disassembler")
Eliminate Coverity CID 1460121 (Resource leak)
# gpg: Signature made Fri 13 Aug 2021 04:03:00 BST
# gpg: using RSA key 7B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* remotes/quic/tags/pull-hex-20210812:
Hexagon (disas/hexagon.c) fix memory leak for early exit cases
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
machine_set_smp() mistakenly checks 'errp' not '*errp',
and so thinks there is an error every single time it runs.
This causes it to jump to the end of the method, skipping
the max CPUs checks. The caller meanwhile sees no error
and so carries on execution. The result of all this is:
$ qemu-system-x86_64 -smp -1
qemu-system-x86_64: GLib: ../glib/gmem.c:142: failed to allocate 481036337048 bytes
instead of
$ qemu-system-x86_64 -smp -1
qemu-system-x86_64: Invalid SMP CPUs -1. The max CPUs supported by machine 'pc-i440fx-6.1' is 255
This is a regression from
commit fe68090e8fbd6e831aaf3fc3bb0459c5cccf14cf
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu May 13 09:03:48 2021 -0400
machine: add smp compound property
Closes: https://gitlab.com/qemu-project/qemu/-/issues/524
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210812175353.4128471-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If dies is not supported by this machine's CPU topology, don't
keep processing options and return directly.
Fixes: 0aebebb561c ("machine: reject -smp dies!=1 for non-PC machines")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210813112608.1452541-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
~0UL has 64 bits on Linux and 32 bits on Windows.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/512
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210812111056.26926-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't allocate the string until error conditions have been checked
Fixes: a00cfed0e ("Hexagon (disas) disassembler")
Eliminate Coverity CID 1460121 (Resource leak)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daud? <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
These machines had been removed in the QEMU v2.6 up to 4.0 time frame.
Message-Id: <20210811084103.74832-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These devices had been removed/replaced in QEMU v2.12 and v4.0.
Message-Id: <20210811084103.74832-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These HMP commands had been removed/replaced in QEMU v2.12. Still, some
people might want to update from older versions to the recent QEMU version,
so we should give some recommendations for the replacements in our
documentation.
Message-Id: <20210811084103.74832-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These CLI options had been removed/replaced in QEMU v3.1. Still, some
people might want to update from older versions to the recent QEMU version,
so we should give some recommendations for the replacements in our
documentation.
Message-Id: <20210811084103.74832-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These CLI options had been removed/replaced in QEMU v3.0. Still, some
people might want to update from older versions to the recent QEMU version,
so we should give some recommendations for the replacements in our
documentation.
Message-Id: <20210811084103.74832-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These CLI options had been removed/replaced in QEMU v2.12. Still, some
people might want to update from older versions to the recent QEMU version,
so we should give some recommendations for the replacements in our
documentation.
Message-Id: <20210811084103.74832-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On oss-fuzz, we build twice, to put together a build that is portable to
the runner containers. On gitlab ci, this is wasteful and contributes to
timeouts on the build-oss-fuzz job. Avoid building twice on gitlab, at
the remote cost of potentially missing some cases that break oss-fuzz
builds.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210809111621.54454-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The vhost-user-blk-test currently hangs if QTEST_QEMU_STORAGE_DAEMON_BINARY
points to a non-existing binary. Let's improve this situation by checking
for the availability of the binary first, so we can fail gracefully if
it is not accessible.
Message-Id: <20210811095949.133462-1-thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vhost-user-blk-test needs the qemu-storage-daemon, otherwise it
currently hangs. So make sure that we build the daemon before running
the tests.
Message-Id: <20210811094705.131314-1-thuth@redhat.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The windows cross builds still take way too long in gitlab CI, so need
more targets to be skipped. We don't want to hurt coverage of other
cross builds more though, so we let jobs fine tune with a new env
variale $CROSS_SKIP_TARGETS.
We take the set of targets that are considered relatively niche or
very old architectures, and skip approx half of them in win32 builds
and the other half of them in win64.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210810140653.3969823-3-berrange@redhat.com>
[thuth: Swapped the "CROSS_SKIP_TARGETS:" lines as suggested by philmd]
Signed-off-by: Thomas Huth <thuth@redhat.com>
New maintainer wanted. Downgrade status to "Odd Fixes" for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210810083450.2377374-8-kraxel@redhat.com>
New maintainer wanted. Downgrade status to "Odd Fixes" for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210810083450.2377374-7-kraxel@redhat.com>
New maintainer wanted. Switch role to "Reviewer" for usb-serial,
downgrade status to "Odd Fixes" for everything else.
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210810083450.2377374-6-kraxel@redhat.com>
New maintainer wanted. Downgrade status to "Odd Fixes" for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210810083450.2377374-5-kraxel@redhat.com>
New maintainer wanted. Downgrade status to "Odd Fixes" for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210810083450.2377374-4-kraxel@redhat.com>
I have not touched the code for years.
Make the entry match reality and drop my name.
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210810083450.2377374-3-kraxel@redhat.com>
