* Run docker probe only if docker or podman are available
The docker probe uses "sudo -n" which can cause an e-mail with a security warning
each time when configure is run. Therefore run docker probe only if either docker
or podman are available.
That avoids the problematic "sudo -n" on build environments which have neither
docker nor podman installed.
Fixes: c4575b59155e2e00 ("configure: store container engine in config-host.mak")
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221030083510.310584-1-sw@weilnetz.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221117172532.538149-2-alex.bennee@linaro.org>
* tests/avocado/machine_aspeed.py: Reduce noise on the console for SDK tests
The Aspeed SDK images are based on OpenBMC which starts a lot of
services. The output noise on the console can break from time to time
the test waiting for the logging prompt.
Change the U-Boot bootargs variable to add "quiet" to the kernel
command line and reduce the output volume. This also drops the test on
the CPU id which was nice to have but not essential.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20221104075347.370503-1-clg@kaod.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221117172532.538149-3-alex.bennee@linaro.org>
* tests/docker: allow user to override check target
This is useful when trying to bisect a particular failing test behind
a docker run. For example:
make docker-test-clang@fedora \
TARGET_LIST=arm-softmmu \
TEST_COMMAND="meson test qtest-arm/qos-test" \
J=9 V=1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-4-alex.bennee@linaro.org>
* docs/devel: add a maintainers section to development process
We don't currently have a clear place in the documentation to describe
the roles and responsibilities of a maintainer. Lets create one so we
can. I've moved a few small bits out of other files to try and keep
everything in one place.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-5-alex.bennee@linaro.org>
* docs/devel: make language a little less code centric
We welcome all sorts of patches.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-6-alex.bennee@linaro.org>
* docs/devel: simplify the minimal checklist
The bullet points are quite long and contain process tips. Move those
bits of the bullet to the relevant sections and link to them. Use a
table for nicer formatting of the checklist.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-7-alex.bennee@linaro.org>
* docs/devel: try and improve the language around patch review
It is important that contributors take the review process seriously
and we collaborate in a respectful way while avoiding personal
attacks. Try and make this clear in the language.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-8-alex.bennee@linaro.org>
* tests/avocado: Raise timeout for boot_linux.py:BootLinuxPPC64.test_pseries_tcg
On my machine, a debug build of QEMU takes about 260 seconds to
complete this test, so with the current timeout value of 180 seconds
it always times out. Double the timeout value to 360 so the test
definitely has enough time to complete.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221110142901.3832318-1-peter.maydell@linaro.org>
Message-Id: <20221117172532.538149-9-alex.bennee@linaro.org>
* tests/avocado: introduce alpine virt test for CI
The boot_linux tests download and run a full cloud image boot and
start a full distro. While the ability to test the full boot chain is
worthwhile it is perhaps a little too heavy weight and causes issues
in CI. Fix this by introducing a new alpine linux ISO boot in
machine_aarch64_virt.
This boots a fully loaded -cpu max with all the bells and whistles in
31s on my machine. A full debug build takes around 180s on my machine
so we set a more generous timeout to cover that.
We don't add a test for lesser GIC versions although there is some
coverage for that already in the boot_xen.py tests. If we want to
introduce more comprehensive testing we can do it with a custom kernel
and initrd rather than a full distro boot.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-10-alex.bennee@linaro.org>
* tests/avocado: skip aarch64 cloud TCG tests in CI
We now have a much lighter weight test in machine_aarch64_virt which
tests the full boot chain in less time. Rename the tests while we are
at it to make it clear it is a Fedora cloud image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221117172532.538149-11-alex.bennee@linaro.org>
* gitlab: integrate coverage report
This should hopefully give is nice coverage information about what our
tests (or at least the subset we are running) have hit. Ideally we
would want a way to trigger coverage on tests likely to be affected by
the current commit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117172532.538149-12-alex.bennee@linaro.org>
* vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devices
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.
This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.
This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.
Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
* tests: acpi: whitelist DSDT before moving PRQx to _SB scope
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* acpi: x86: move RPQx field back to _SB scope
Commit 47a373faa6b2 (acpi: pc/q35: drop ad-hoc PCI-ISA bridge AML routines and let bus ennumeration generate AML)
moved ISA bridge AML generation to respective devices and was using
aml_alias() to provide PRQx fields in _SB. scope. However, it turned
out that SeaBIOS was not able to process Alias opcode when parsing DSDT,
resulting in lack of keyboard during boot (SeaBIOS console, grub, FreeDOS).
While fix for SeaBIOS is posted
https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/RGPL7HESH5U5JRLEO6FP77CZVHZK5J65/
fixed SeaBIOS might not make into QEMU-7.2 in time.
Hence this workaround that puts PRQx back into _SB scope
and gets rid of aliases in ISA bridge description, so
DSDT will be parsable by broken SeaBIOS.
That brings back hardcoded references to ISA bridge
PCI0.S08.P40C/PCI0.SF8.PIRQ
where middle part now is auto generated based on slot it's
plugged in, but it should be fine as bridge initialization
also hardcodes PCI address of the bridge so it can't ever
move. Once QEMU tree has fixed SeaBIOS blob, we should be able
to drop this part and revert back to alias based approach
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tests: acpi: x86: update expected DSDT after moving PRQx fields in _SB scope
Expected DSDT changes,
pc:
- Field (P40C, ByteAcc, NoLock, Preserve)
+ Scope (\_SB)
{
- PRQ0, 8,
- PRQ1, 8,
- PRQ2, 8,
- PRQ3, 8
+ Field (PCI0.S08.P40C, ByteAcc, NoLock, Preserve)
+ {
+ PRQ0, 8,
+ PRQ1, 8,
+ PRQ2, 8,
+ PRQ3, 8
+ }
}
- Alias (PRQ0, \_SB.PRQ0)
- Alias (PRQ1, \_SB.PRQ1)
- Alias (PRQ2, \_SB.PRQ2)
- Alias (PRQ3, \_SB.PRQ3)
q35:
- Field (PIRQ, ByteAcc, NoLock, Preserve)
- {
- PRQA, 8,
- PRQB, 8,
- PRQC, 8,
- PRQD, 8,
- Offset (0x08),
- PRQE, 8,
- PRQF, 8,
- PRQG, 8,
- PRQH, 8
+ Scope (\_SB)
+ {
+ Field (PCI0.SF8.PIRQ, ByteAcc, NoLock, Preserve)
+ {
+ PRQA, 8,
+ PRQB, 8,
+ PRQC, 8,
+ PRQD, 8,
+ Offset (0x08),
+ PRQE, 8,
+ PRQF, 8,
+ PRQG, 8,
+ PRQH, 8
+ }
}
- Alias (PRQA, \_SB.PRQA)
- Alias (PRQB, \_SB.PRQB)
- Alias (PRQC, \_SB.PRQC)
- Alias (PRQD, \_SB.PRQD)
- Alias (PRQE, \_SB.PRQE)
- Alias (PRQF, \_SB.PRQF)
- Alias (PRQG, \_SB.PRQG)
- Alias (PRQH, \_SB.PRQH)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* MAINTAINERS: add mst to list of biosbits maintainers
Adding Michael's name to the list of bios bits maintainers so that all changes
and fixes into biosbits framework can go through his tree and he is notified.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221111151138.36988-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tests/avocado: configure acpi-bits to use avocado timeout
Instead of using a hardcoded timeout, just rely on Avocado's built-in
test case timeout. This helps avoid timeout issues on machines where 60
seconds is not sufficient.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20221115212759.3095751-1-jsnow@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
* acpi/tests/avocado/bits: keep the work directory when BITS_DEBUG is set in env
Debugging bits issue often involves running the QEMU command line manually
outside of the avocado environment with the generated ISO. Hence, its
inconvenient if the iso gets cleaned up after the test has finished. This change
makes sure that the work directory is kept after the test finishes if the test
is run with BITS_DEBUG=1 in the environment so that the iso is available for use
with the QEMU command line.
CC: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221117113630.543495-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* virtio: disable error for out of spec queue-enable
Virtio 1.0 is pretty clear that features have to be
negotiated before enabling VQs. Unfortunately Seabios
ignored this ever since gaining 1.0 support (UEFI is ok).
Comment the error out for now, and add a TODO.
Fixes: 3c37f8b8d1 ("virtio: introduce virtio_queue_enable()")
Cc: "Kangjie Xu" <kangjie.xu@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221121200339.362452-1-mst@redhat.com>
* hw/loongarch: Add default stdout uart in fdt
Add "chosen" subnode into LoongArch fdt, and set it's
"stdout-path" prop to uart node.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221115114923.3372414-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* hw/loongarch: Fix setprop_sized method in fdt rtc node.
Fix setprop_sized method in fdt rtc node.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221116040300.3459818-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* hw/loongarch: Replace the value of uart info with macro
Using macro to replace the value of uart info such as addr, size
in acpi_build method.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221115115008.3372489-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* target/arm: Don't do two-stage lookup if stage 2 is disabled
In get_phys_addr_with_struct(), we call get_phys_addr_twostage() if
the CPU supports EL2. However, we don't check here that stage 2 is
actually enabled. Instead we only check that inside
get_phys_addr_twostage() to skip stage 2 translation. This means
that even if stage 2 is disabled we still tell the stage 1 lookup to
do its page table walks via stage 2.
This works by luck for normal CPU accesses, but it breaks for debug
accesses, which are used by the disassembler and also by semihosting
file reads and writes, because the debug case takes a different code
path inside S1_ptw_translate().
This means that setups that use semihosting for file loads are broken
(a regression since 7.1, introduced in recent ptw refactoring), and
that sometimes disassembly in debug logs reports "unable to read
memory" rather than showing the guest insns.
Fix the bug by hoisting the "is stage 2 enabled?" check up to
get_phys_addr_with_struct(), so that we handle S2 disabled the same
way we do the "no EL2" case, with a simple single stage lookup.
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221121212404.1450382-1-peter.maydell@linaro.org
* target/arm: Use signed quantity to represent VMSAv8-64 translation level
The LPA2 extension implements 52-bit virtual addressing for 4k and 16k
translation granules, and for the former, this means an additional level
of translation is needed. This means we start counting at -1 instead of
0 when doing a walk, and so 'level' is now a signed quantity, and should
be typed as such. So turn it from uint32_t into int32_t.
This avoids a level of -1 getting misinterpreted as being >= 3, and
terminating a page table walk prematurely with a bogus output address.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Update VERSION for v7.2.0-rc2
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tests/avocado: Update the URLs of the advent calendar images
The qemu-advent-calendar.org server will be decommissioned soon.
I've mirrored the images that we use for the QEMU CI to gitlab,
so update their URLs to point to the new location.
Message-Id: <20221121102436.78635-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* tests/qtest: Decrease the amount of output from the qom-test
The logs in the gitlab-CI have a size constraint, and sometimes
we already hit this limit. The biggest part of the log then seems
to be filled by the qom-test, so we should decrease the size of
the output - which can be done easily by not printing the path
for each property, since the path has already been logged at the
beginning of each node that we handle here.
However, if we omit the path, we should make sure to not recurse
into child nodes in between, so that it is clear to which node
each property belongs. Thus store the children and links in a
temporary list and recurse only at the end of each node, when
all properties have already been printed.
Message-Id: <20221121194240.149268-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* tests/avocado: use new rootfs for orangepi test
The old URL wasn't stable. I suspect the current URL will only be
stable for a few months so maybe we need another strategy for hosting
rootfs snapshots?
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221118113309.1057790-1-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Revert "usbredir: avoid queuing hello packet on snapshot restore"
Run state is also in RUN_STATE_PRELAUNCH while "-S" is used.
This reverts commit 0631d4b448454ae8a1ab091c447e3f71ab6e088a
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The original commit broke the usage of usbredir with libvirt, which
starts every domain with "-S".
This workaround is no longer needed because the usbredir behavior
has been fixed in the meantime:
https://gitlab.freedesktop.org/spice/usbredir/-/merge_requests/61
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <1689cec3eadcea87255e390cb236033aca72e168.1669193161.git.jtomko@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* gtk: disable GTK Clipboard with a new meson option
The GTK Clipboard implementation may cause guest hangs.
Therefore implement new configure switch: --enable-gtk-clipboard,
as a meson option disabled by default, which warns in the help
text about the experimental nature of the feature.
Regenerate the meson build options to include it.
The initialization of the clipboard is gtk.c, as well as the
compilation of gtk-clipboard.c are now conditional on this new
option to be set.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1150
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Message-Id: <20221121135538.14625-1-cfontana@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/usb/hcd-xhci.c: spelling: tranfer
Fixes: effaf5a240e03020f4ae953e10b764622c3e87cc
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221105114851.306206-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* ui/gtk: prevent ui lock up when dpy_gl_update called again before current draw event occurs
A warning, "qemu: warning: console: no gl-unblock within" followed by
guest scanout lockup can happen if dpy_gl_update is called in a row
and the second call is made before gd_draw_event scheduled by the first
call is taking place. This is because draw call returns without decrementing
gl_block ref count if the dmabuf was already submitted as shown below.
(gd_gl_area_draw/gd_egl_draw)
if (dmabuf) {
if (!dmabuf->draw_submitted) {
return;
} else {
dmabuf->draw_submitted = false;
}
}
So it should not schedule any redundant draw event in case draw_submitted is
already set in gd_egl_fluch/gd_gl_area_scanout_flush.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221021192315.9110-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/usb/hcd-xhci: Reset the XHCIState with device_cold_reset()
Currently the hcd-xhci-pci and hcd-xhci-sysbus devices, which are
mostly wrappers around the TYPE_XHCI device, which is a direct
subclass of TYPE_DEVICE. Since TYPE_DEVICE devices are not on any
qbus and do not get automatically reset, the wrapper devices both
reset the TYPE_XHCI device in their own reset functions. However,
they do this using device_legacy_reset(), which will reset the device
itself but not any bus it has.
Switch to device_cold_reset(), which avoids using a deprecated
function and also propagates reset along any child buses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221014145423.2102706-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/audio/intel-hda: don't reset codecs twice
Currently the intel-hda device has a reset method which manually
resets all the codecs by calling device_legacy_reset() on them. This
means they get reset twice, once because child devices on a qbus get
reset before the parent device's reset method is called, and then
again because we're manually resetting them.
Drop the manual reset call, and ensure that codecs are still reset
when the guest does a reset via ICH6_GCTL_RESET by using
device_cold_reset() (which resets all the devices on the qbus as well
as the device itself) instead of a direct call to the reset function.
This is a slight ordering change because the (only) codec reset now
happens before the controller registers etc are reset, rather than
once before and then once after, but the codec reset function
hda_audio_reset() doesn't care.
This lets us drop a use of device_legacy_reset(), which is
deprecated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221014142632.2092404-2-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* hw/audio/intel-hda: Drop unnecessary prototype
The only use of intel_hda_reset() is after its definition, so we
don't need to separately declare its prototype at the top of the
file; drop the unnecessary line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221014142632.2092404-3-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* add syx snapshot extras
* it compiles!
* virtiofsd: Add `sigreturn` to the seccomp whitelist
The virtiofsd currently crashes on s390x. This is because of a
`sigreturn` system call. See audit log below:
type=SECCOMP msg=audit(1669382477.611:459): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=system_u:system_r:virtd_t:s0-s0:c0.c1023 pid=6649 comm="virtiofsd" exe="/usr/libexec/virtiofsd" sig=31 arch=80000016 syscall=119 compat=0 ip=0x3fff15f748a code=0x80000000AUID="unset" UID="root" GID="root" ARCH=s390x SYSCALL=sigreturn
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221125143946.27717-1-mhartmay@linux.ibm.com>
* libvhost-user: Fix wrong type of argument to formatting function (reported by LGTM)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20220422070144.1043697-2-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-2-sw@weilnetz.de>
* libvhost-user: Fix format strings
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220422070144.1043697-3-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-3-sw@weilnetz.de>
* libvhost-user: Fix two more format strings
This fix is required for 32 bit hosts. The bug was detected by CI
for arm-linux, but is also relevant for i386-linux.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-4-sw@weilnetz.de>
* libvhost-user: Add format attribute to local function vu_panic
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220422070144.1043697-4-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-5-sw@weilnetz.de>
* MAINTAINERS: Add subprojects/libvhost-user to section "vhost"
Signed-off-by: Stefan Weil <sw@weilnetz.de>
[Michael agreed to act as maintainer for libvhost-user via email in
https://lore.kernel.org/qemu-devel/20221123015218-mutt-send-email-mst@kernel.org/.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-6-sw@weilnetz.de>
* Add G_GNUC_PRINTF to function qemu_set_info_str and fix related issues
With the G_GNUC_PRINTF function attribute the compiler detects
two potential insecure format strings:
../../../net/stream.c:248:31: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
qemu_set_info_str(&s->nc, uri);
^~~
../../../net/stream.c:322:31: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
qemu_set_info_str(&s->nc, uri);
^~~
There are also two other warnings:
../../../net/socket.c:182:35: warning: zero-length gnu_printf format string [-Wformat-zero-length]
182 | qemu_set_info_str(&s->nc, "");
| ^~
../../../net/stream.c:170:35: warning: zero-length gnu_printf format string [-Wformat-zero-length]
170 | qemu_set_info_str(&s->nc, "");
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221126152507.283271-7-sw@weilnetz.de>
* del ramfile
* update seabios source from 1.16.0 to 1.16.1
git shortlog rel-1.16.0..rel-1.16.1
===================================
Gerd Hoffmann (3):
malloc: use variable for ZoneHigh size
malloc: use large ZoneHigh when there is enough memory
virtio-blk: use larger default request size
Igor Mammedov (1):
acpi: parse Alias object
Volker Rümelin (2):
pci: refactor the pci_config_*() functions
reset: force standard PCI configuration access
Xiaofei Lee (1):
virtio-blk: Fix incorrect type conversion in virtio_blk_op()
Xuan Zhuo (2):
virtio-mmio: read/write the hi 32 features for mmio
virtio: finalize features before using device
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* update seabios binaries to 1.16.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* fix for non i386 archs
* replay: Fix declaration of replay_read_next_clock
Fixes the build with gcc 13:
replay/replay-time.c:34:6: error: conflicting types for \
'replay_read_next_clock' due to enum/integer mismatch; \
have 'void(ReplayClockKind)' [-Werror=enum-int-mismatch]
34 | void replay_read_next_clock(ReplayClockKind kind)
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from ../qemu/replay/replay-time.c:14:
replay/replay-internal.h:139:6: note: previous declaration of \
'replay_read_next_clock' with type 'void(unsigned int)'
139 | void replay_read_next_clock(unsigned int kind);
| ^~~~~~~~~~~~~~~~~~~~~~
Fixes: 8eda206e090 ("replay: recording and replaying clock ticks")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221129010547.284051-1-richard.henderson@linaro.org>
* hw/display/qxl: Have qxl_log_command Return early if no log_cmd handler
Only 3 command types are logged: no need to call qxl_phys2virt()
for the other types. Using different cases will help to pass
different structure sizes to qxl_phys2virt() in a pair of commits.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-2-philmd@linaro.org>
* hw/display/qxl: Document qxl_phys2virt()
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-3-philmd@linaro.org>
* hw/display/qxl: Pass requested buffer size to qxl_phys2virt()
Currently qxl_phys2virt() doesn't check for buffer overrun.
In order to do so in the next commit, pass the buffer size
as argument.
For QXLCursor in qxl_render_cursor() -> qxl_cursor() we
verify the size of the chunked data ahead, checking we can
access 'sizeof(QXLCursor) + chunk->data_size' bytes.
Since in the SPICE_CURSOR_TYPE_MONO case the cursor is
assumed to fit in one chunk, no change are required.
In SPICE_CURSOR_TYPE_ALPHA the ahead read is handled in
qxl_unpack_chunks().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-4-philmd@linaro.org>
* hw/display/qxl: Avoid buffer overrun in qxl_phys2virt (CVE-2022-4144)
Have qxl_get_check_slot_offset() return false if the requested
buffer size does not fit within the slot memory region.
Similarly qxl_phys2virt() now returns NULL in such case, and
qxl_dirty_one_surface() aborts.
This avoids buffer overrun in the host pointer returned by
memory_region_get_ram_ptr().
Fixes: CVE-2022-4144 (out-of-bounds read)
Reported-by: Wenxu Yin (@awxylitol)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1336
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-5-philmd@linaro.org>
* hw/display/qxl: Assert memory slot fits in preallocated MemoryRegion
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221128202741.4945-6-philmd@linaro.org>
* block-backend: avoid bdrv_unregister_buf() NULL pointer deref
bdrv_*() APIs expect a valid BlockDriverState. Calling them with bs=NULL
leads to undefined behavior.
Jonathan Cameron reported this following NULL pointer dereference when a
VM with a virtio-blk device and a memory-backend-file object is
terminated:
1. qemu_cleanup() closes all drives, setting blk->root to NULL
2. qemu_cleanup() calls user_creatable_cleanup(), which results in a RAM
block notifier callback because the memory-backend-file is destroyed.
3. blk_unregister_buf() is called by virtio-blk's BlockRamRegistrar
notifier callback and undefined behavior occurs.
Fixes: baf422684d73 ("virtio-blk: use BDRV_REQ_REGISTERED_BUF optimization hint")
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221121211923.1993171-1-stefanha@redhat.com>
* target/arm: Set TCGCPUOps.restore_state_to_opc for v7m
This setting got missed, breaking v7m.
Fixes: 56c6c98df85c ("target/arm: Convert to tcg_ops restore_state_to_opc")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1347
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221129204146.550394-1-richard.henderson@linaro.org>
* Update VERSION for v7.2.0-rc3
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* hooks are now post mem access
* tests/qtests: override "force-legacy" for gpio virtio-mmio tests
The GPIO device is a VIRTIO_F_VERSION_1 devices but running with a
legacy MMIO interface we miss out that feature bit causing confusion.
For the GPIO test force the mmio bus to support non-legacy so we can
properly test it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1333
Message-Id: <20221130112439.2527228-2-alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vhost: enable vrings in vhost_dev_start() for vhost-user devices
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features")
properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user
backend, but we forgot to enable vrings as specified in
docs/interop/vhost-user.rst:
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the
ring starts directly in the enabled state.
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is
initialized in a disabled state and is enabled by
``VHOST_USER_SET_VRING_ENABLE`` with parameter 1.
Some vhost-user front-ends already did this by calling
vhost_ops.vhost_set_vring_enable() directly:
- backends/cryptodev-vhost.c
- hw/net/virtio-net.c
- hw/virtio/vhost-user-gpio.c
But most didn't do that, so we would leave the vrings disabled and some
backends would not work. We observed this issue with the rust version of
virtiofsd [1], which uses the event loop [2] provided by the
vhost-user-backend crate where requests are not processed if vring is
not enabled.
Let's fix this issue by enabling the vrings in vhost_dev_start() for
vhost-user front-ends that don't already do this directly. Same thing
also in vhost_dev_stop() where we disable vrings.
[1] https://gitlab.com/virtio-fs/virtiofsd
[2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217
Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features")
Reported-by: German Maglione <gmaglione@redhat.com>
Tested-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221123131630.52020-1-sgarzare@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/virtio: add started_vu status field to vhost-user-gpio
As per the fix to vhost-user-blk in f5b22d06fb (vhost: recheck dev
state in the vhost_migration_log routine) we really should track the
connection and starting separately.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-4-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/virtio: generalise CHR_EVENT_CLOSED handling
..and use for both virtio-user-blk and virtio-user-gpio. This avoids
the circular close by deferring shutdown due to disconnection until a
later point. virtio-user-blk already had this mechanism in place so
generalise it as a vhost-user helper function and use for both blk and
gpio devices.
While we are at it we also fix up vhost-user-gpio to re-establish the
event handler after close down so we can reconnect later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221130112439.2527228-5-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* include/hw: VM state takes precedence in virtio_device_should_start
The VM status should always preempt the device status for these
checks. This ensures the device is in the correct state when we
suspend the VM prior to migrations. This restores the checks to the
order they where in before the refactoring moved things around.
While we are at it lets improve our documentation of the various
fields involved and document the two functions.
Fixes: 9f6bcfd99f (hw/virtio: move vm_running check to virtio_device_started)
Fixes: 259d69c00b (hw/virtio: introduce virtio_device_should_start)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-6-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/nvme: fix aio cancel in format
There are several bugs in the async cancel code for the Format command.
Firstly, cancelling a format operation neglects to set iocb->ret as well
as clearing the iocb->aiocb after cancelling the underlying aiocb which
causes the aio callback to ignore the cancellation. Trivial fix.
Secondly, and worse, because the request is queued up for posting to the
CQ in a bottom half, if the cancellation is due to the submission queue
being deleted (which calls blk_aio_cancel), the req structure is
deallocated in nvme_del_sq prior to the bottom half being schedulued.
Fix this by simply removing the bottom half, there is no reason to defer
it anyway.
Fixes: 3bcf26d3d619 ("hw/nvme: reimplement format nvm to allow cancellation")
Reported-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: fix aio cancel in flush
Make sure that iocb->aiocb is NULL'ed when cancelling.
Fix a potential use-after-free by removing the bottom half and enqueuing
the completion directly.
Fixes: 38f4ac65ac88 ("hw/nvme: reimplement flush to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: fix aio cancel in zone reset
If the zone reset operation is cancelled but the block unmap operation
completes normally, the callback will continue resetting the next zone
since it neglects to check iocb->ret which will have been set to
-ECANCELED. Make sure that this is checked and bail out if an error is
present.
Secondly, fix a potential use-after-free by removing the bottom half and
enqueuing the completion directly.
Fixes: 63d96e4ffd71 ("hw/nvme: reimplement zone reset to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: fix aio cancel in dsm
When the DSM operation is cancelled asynchronously, we set iocb->ret to
-ECANCELED. However, the callback function only checks the return value
of the completed aio, which may have completed succesfully prior to the
cancellation and thus the callback ends up continuing the dsm operation
instead of bailing out. Fix this.
Secondly, fix a potential use-after-free by removing the bottom half and
enqueuing the completion directly.
Fixes: d7d1474fd85d ("hw/nvme: reimplement dsm to allow cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* hw/nvme: remove copy bh scheduling
Fix a potential use-after-free by removing the bottom half and enqueuing
the completion directly.
Fixes: 796d20681d9b ("hw/nvme: reimplement the copy command to allow aio cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* target/i386: allow MMX instructions with CR4.OSFXSR=0
MMX state is saved/restored by FSAVE/FRSTOR so the instructions are
not illegal opcodes even if CR4.OSFXSR=0. Make sure that validate_vex
takes into account the prefix and only checks HF_OSFXSR_MASK in the
presence of an SSE instruction.
Fixes: 20581aadec5e ("target/i386: validate VEX prefixes via the instructions' exception classes", 2022-10-18)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1350
Reported-by: Helge Konetzka (@hejko on gitlab.com)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* target/i386: Always completely initialize TranslateFault
In get_physical_address, the canonical address check failed to
set TranslateFault.stage2, which resulted in an uninitialized
read from the struct when reporting the fault in x86_cpu_tlb_fill.
Adjust all error paths to use structure assignment so that the
entire struct is always initialized.
Reported-by: Daniel Hoffman <dhoff749@gmail.com>
Fixes: 9bbcf372193a ("target/i386: Reorg GET_HPHYS")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221201074522.178498-1-richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1324
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/loongarch/virt: Add cfi01 pflash device
Add cfi01 pflash device for LoongArch virt machine
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221130100647.398565-1-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* Sync pc on breakpoints
* tests/qtest/migration-test: Fix unlink error and memory leaks
When running the migration test compiled with Clang from Fedora 37
and sanitizers enabled, there is an error complaining about unlink():
../tests/qtest/migration-test.c:1072:12: runtime error: null pointer
passed as argument 1, which is declared to never be null
/usr/include/unistd.h:858:48: note: nonnull attribute specified here
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
../tests/qtest/migration-test.c:1072:12 in
(test program exited with status code 1)
TAP parsing error: Too few tests run (expected 33, got 20)
The data->clientcert and data->clientkey pointers can indeed be unset
in some tests, so we have to check them before calling unlink() with
those.
While we're at it, I also noticed that the code is only freeing
some but not all of the allocated strings in this function, and
indeed, valgrind is also complaining about memory leaks here.
So let's call g_free() on all allocated strings to avoid leaking
memory here.
Message-Id: <20221125083054.117504-1-thuth@redhat.com>
Tested-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* target/s390x/tcg: Fix and improve the SACF instruction
The SET ADDRESS SPACE CONTROL FAST instruction is not privileged, it can be
used from problem space, too. Just the switching to the home address space
is privileged and should still generate a privilege exception. This bug is
e.g. causing programs like Java that use the "getcpu" vdso kernel function
to crash (see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990417#26 ).
While we're at it, also check if DAT is not enabled. In that case the
instruction is supposed to generate a special operation exception.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/655
Message-Id: <20221201184443.136355-1-thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* hw/display/next-fb: Fix comment typo
Signed-off-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Message-Id: <20221125160849.23711-1-evgeny.v.ermakov@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* fix dev snapshots
* working syx snaps
* Revert "hw/loongarch/virt: Add cfi01 pflash device"
This reverts commit 14dccc8ea6ece7ee63273144fb55e4770a05e0fd.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221205113007.683505-1-gaosong@loongson.cn>
* Update VERSION for v7.2.0-rc4
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Co-authored-by: Stefan Weil <sw@weilnetz.de>
Co-authored-by: Cédric Le Goater <clg@kaod.org>
Co-authored-by: Alex Bennée <alex.bennee@linaro.org>
Co-authored-by: Peter Maydell <peter.maydell@linaro.org>
Co-authored-by: Stefano Garzarella <sgarzare@redhat.com>
Co-authored-by: Igor Mammedov <imammedo@redhat.com>
Co-authored-by: Ani Sinha <ani@anisinha.ca>
Co-authored-by: John Snow <jsnow@redhat.com>
Co-authored-by: Michael S. Tsirkin <mst@redhat.com>
Co-authored-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Co-authored-by: Stefan Hajnoczi <stefanha@redhat.com>
Co-authored-by: Ard Biesheuvel <ardb@kernel.org>
Co-authored-by: Thomas Huth <thuth@redhat.com>
Co-authored-by: Joelle van Dyne <j@getutm.app>
Co-authored-by: Claudio Fontana <cfontana@suse.de>
Co-authored-by: Michael Tokarev <mjt@tls.msk.ru>
Co-authored-by: Dongwon Kim <dongwon.kim@intel.com>
Co-authored-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Co-authored-by: Stefan Weil via <qemu-devel@nongnu.org>
Co-authored-by: Gerd Hoffmann <kraxel@redhat.com>
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-authored-by: Evgeny Ermakov <evgeny.v.ermakov@gmail.com>
Co-authored-by: Klaus Jensen <k.jensen@samsung.com>
Co-authored-by: Paolo Bonzini <pbonzini@redhat.com>
Co-authored-by: Song Gao <gaosong@loongson.cn>
The citing commit has incorrect code in vhost_vdpa_receive() that returns
zero instead of full packet size to the caller. This renders pending packets
unable to be freed so then get clogged in the tx queue forever. When device
is being reset later on, below assertion failure ensues:
0 0x00007f86d53bb387 in raise () from /lib64/libc.so.6
1 0x00007f86d53bca78 in abort () from /lib64/libc.so.6
2 0x00007f86d53b41a6 in __assert_fail_base () from /lib64/libc.so.6
3 0x00007f86d53b4252 in __assert_fail () from /lib64/libc.so.6
4 0x000055b8f6ff6fcc in virtio_net_reset (vdev=<optimized out>) at /usr/src/debug/qemu/hw/net/virtio-net.c:563
5 0x000055b8f7012fcf in virtio_reset (opaque=0x55b8faf881f0) at /usr/src/debug/qemu/hw/virtio/virtio.c:1993
6 0x000055b8f71f0086 in virtio_bus_reset (bus=bus@entry=0x55b8faf88178) at /usr/src/debug/qemu/hw/virtio/virtio-bus.c:102
7 0x000055b8f71f1620 in virtio_pci_reset (qdev=<optimized out>) at /usr/src/debug/qemu/hw/virtio/virtio-pci.c:1845
8 0x000055b8f6fafc6c in memory_region_write_accessor (mr=<optimized out>, addr=<optimized out>, value=<optimized out>,
size=<optimized out>, shift=<optimized out>, mask=<optimized out>, attrs=...) at /usr/src/debug/qemu/memory.c:483
9 0x000055b8f6fadce9 in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f867e7fb7e8, size=size@entry=1,
access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x55b8f6fafc20 <memory_region_write_accessor>,
mr=0x55b8faf80a50, attrs=...) at /usr/src/debug/qemu/memory.c:544
10 0x000055b8f6fb1d0b in memory_region_dispatch_write (mr=mr@entry=0x55b8faf80a50, addr=addr@entry=20, data=0, op=<optimized out>,
attrs=attrs@entry=...) at /usr/src/debug/qemu/memory.c:1470
11 0x000055b8f6f62ada in flatview_write_continue (fv=fv@entry=0x7f86ac04cd20, addr=addr@entry=549755813908, attrs=...,
attrs@entry=..., buf=buf@entry=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=len@entry=1, addr1=20, l=1,
mr=0x55b8faf80a50) at /usr/src/debug/qemu/exec.c:3266
12 0x000055b8f6f62c8f in flatview_write (fv=0x7f86ac04cd20, addr=549755813908, attrs=...,
buf=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=1) at /usr/src/debug/qemu/exec.c:3306
13 0x000055b8f6f674cb in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=<optimized out>,
len=<optimized out>) at /usr/src/debug/qemu/exec.c:3396
14 0x000055b8f6f67575 in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=...,
buf=buf@entry=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=<optimized out>, is_write=<optimized out>)
at /usr/src/debug/qemu/exec.c:3406
15 0x000055b8f6fc1cc8 in kvm_cpu_exec (cpu=cpu@entry=0x55b8f9aa0e10) at /usr/src/debug/qemu/accel/kvm/kvm-all.c:2410
16 0x000055b8f6fa5f5e in qemu_kvm_cpu_thread_fn (arg=0x55b8f9aa0e10) at /usr/src/debug/qemu/cpus.c:1318
17 0x000055b8f7336e16 in qemu_thread_start (args=0x55b8f9ac8480) at /usr/src/debug/qemu/util/qemu-thread-posix.c:519
18 0x00007f86d575aea5 in start_thread () from /lib64/libpthread.so.0
19 0x00007f86d5483b2d in clone () from /lib64/libc.so.6
Make vhost_vdpa_receive() return the size passed in as is, so that the
caller qemu_deliver_packet_iov() would eventually propagate it back to
virtio_net_flush_tx() to release pending packets from the async_tx queue.
Which corresponds to the drop path where qemu_sendv_packet_async() returns
non-zero in virtio_net_flush_tx().
Fixes: 846a1e85da64 ("vdpa: Add dummy receive callback")
Cc: Eugenio Perez Martin <eperezma@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221108041929.18417-2-jasowang@redhat.com>
Commit 8801ccd0500437 introduced a compilation failure with clang
version 10.0.0-4ubuntu1:
../../net/vhost-vdpa.c:654:16: error: variable 'vdpa_device_fd' is
used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
} else if (opts->has_vhostfd) {
^~~~~~~~~~~~~~~~~
../../net/vhost-vdpa.c:662:33: note: uninitialized use occurs here
r = vhost_vdpa_get_features(vdpa_device_fd, &features, errp);
^~~~~~~~~~~~~~
../../net/vhost-vdpa.c:654:12: note: remove the 'if' if its condition
is always true
} else if (opts->has_vhostfd) {
^~~~~~~~~~~~~~~~~~~~~~~
../../net/vhost-vdpa.c:629:23: note: initialize the variable
'vdpa_device_fd' to silence this warning
int vdpa_device_fd;
^
= 0
1 error generated.
It's a false positive -- the compiler doesn't manage to figure out
that the error checks further up mean that there's no code path where
vdpa_device_fd isn't initialized. Put another way, the problem is
that we check "if (opts->has_vhostfd)" when in fact that condition
must always be true. A cleverer static analyser would probably warn
that we were checking an always-true condition.
Fix the compilation failure by removing the unnecessary if().
Fixes: 8801ccd0500437 ("vhost-vdpa: allow passing opened vhostfd to vhost-vdpa")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221031132901.1277150-1-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Embed the setting of info_str in a function.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Similar to other vhost backends, vhostfd can be passed to vhost-vdpa
backend as another parameter to instantiate vhost-vdpa net client.
This would benefit the use case where only open file descriptors, as
opposed to raw vhost-vdpa device paths, are accessible from the QEMU
process.
(qemu) netdev_add type=vhost-vdpa,vhostfd=61,id=vhost-vdpa1
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The guest will see undefined behavior if it issue not negotiate
commands, bit it is expected somehow.
Simplify code deleting this check.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This entry was duplicated on referenced commit. Removing it.
Fixes: 402378407dbd ("vhost-vdpa: multiqueue support")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
So we are sure we can update the device model properly before sending to
the device.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Same way as with the MAC, restore the expected number of queues at
device's start.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since there may be many commands we need to issue to load the NIC
state, let's split them in individual functions
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows to simplify the code. Rename to status while we're at it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can restore the device state in the destination via CVQ now. Remove
the migration blocker.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is needed so the destination vdpa device see the same state a the
guest set in the source.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
So we can reuse it to inject state messages.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
--
v7:
* Remove double free error
v6:
* Do not assume in buffer sent to the device is sizeof(virtio_net_ctrl_ack)
v5:
* Do not use an artificial !NULL VirtQueueElement
* Use only out size instead of iovec dev_buffers for these functions.
Signed-off-by: Jason Wang <jasowang@redhat.com>
As this series will reuse them to restore the device state at the end of
a migration (or a device start), let's allocate only once at the device
start so we don't duplicate their map and unmap.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Next patches will add a new info callback to restore NIC status through
CVQ. Since only the CVQ vhost device is needed, create it with a new
NetClientInfo.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's convenient to call iova_tree_remove from a map returned from
iova_tree_find or iova_tree_find_iova. With the current code this is not
possible, since we will free it, and then we will try to search for it
again.
Fix it making accepting the map by value, forcing a copy of the
argument. Not applying a fixes tag, since there is no use like that at
the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
File descriptor vdpa_device_fd is not free in the case of returning
error from vhost_vdpa_get_features. Fixing it by making all errors go to
the same error path.
Resolves: Coverity CID 1490785
Fixes: 8170ab3f43 ("vdpa: Extract get features part from vhost_vdpa_get_max_queue_pairs")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220802112447.249436-2-eperezma@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Finally offering the possibility to enable SVQ from the command line.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
To know the device features is needed for CVQ SVQ, so SVQ knows if it
can handle all commands or not. Extract from
vhost_vdpa_get_max_queue_pairs so we can reuse it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Introduce the control virtqueue support for vDPA shadow virtqueue. This
is needed for advanced networking features like rx filtering.
Virtio-net control VQ copies the descriptors to qemu's VA, so we avoid
TOCTOU with the guest's or device's memory every time there is a device
model change. Otherwise, the guest could change the memory content in
the time between qemu and the device read it.
To demonstrate command handling, VIRTIO_NET_F_CTRL_MACADDR is
implemented. If the virtio-net driver changes MAC the virtio-net device
model will be updated with the new one, and a rx filtering change event
will be raised.
More cvq commands could be added here straightforwardly but they have
not been tested.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do a simple forwarding of CVQ buffers, the same work SVQ could do but
through callbacks. No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
... such that no memory leaks on dangling net clients in case of
error.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-4-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu falls back on userland handlers even if vhost-user and vhost-vdpa
cases. These assumes a tap device can handle the packets.
If a vdpa device fail to start, it can trigger a sigsegv because of
that. Add dummy receiver that returns no progress so it can keep
running.
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211125101614.76927-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Since net_init_vhost_vdpa is trying to open it. Not specifying it in the
command line crash qemu.
Fixes: 7327813d17 ("vhost-vdpa: open device fd in net_init_vhost_vdpa()")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211112193431.2379298-3-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no reason to keep using the old one, since we neither use the
variadics arguments nor open it with O_DIRECT.
Also, net_client_init1, the caller of net_init_vhost_vdpa, wants all
net_client_init_fun to use Error API, so it's a good step in that
direction.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211112193431.2379298-2-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use g_autofree to ensure that `config` is freed when
vhost_vdpa_get_max_queue_pairs() returns.
Reported-by: Coverity (CID 1465228: RESOURCE_LEAK)
Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211102155157.241034-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch implements the multiqueue support for vhost-vdpa. This is
done simply by reading the number of queue pairs from the config space
and initialize the datapath and control path net client.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to let net_vhost_vdpa_init() to return
NetClientState *. This is used for the callers to allocate multiqueue
NetClientState for multiqueue support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-5-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to open device fd in net_init_vhost_vpda(). This is
used to prepare for the multiqueue support.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-vdpa works only with specific devices. At startup, it second
guesses what the command line option handling will do and error out if
it thinks a non-virtio device will attach to them.
This second guessing is not only ugly, it can lead to wrong error
messages ('-device floppy,netdev=foo' should complain about an unknown
property, not about the wrong kind of network device being attached) and
completely ignores hotplugging.
Drop the old checks and implement .check_peer_type() instead to fix
this. As a nice side effect, it also removes one more dependency on the
legacy QemuOpts infrastructure and even reduces the code size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-4-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The queue_index of NetClientState should be assigned in set_netdev()
afterwards, so trying to net_vhost_vdpa_init() is meaningless. This
patch removes this.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-12-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vhost_vdpa_add() can fail for various reasons, so the assertion of the
succeed is wrong. Instead, we should free the NetClientState and
propagate the error to the caller
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce new error label to avoid the unnecessary checking of net
pointer.
Fixes: 1e0a84ea49b68 ("vhost-vdpa: introduce vhost-vdpa net client")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-10-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 1e0a84ea49b68 ("vhost-vdpa: introduce vhost-vdpa net client")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-9-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous vhost_net_cleanup is sufficient for freeing, calling
vhost_vdpa_del() in this case will lead an extra round of free. Note
that this kind of "double free" is safe since vhost_dev_cleanup() zero
the whole structure.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-8-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VhostVDPAState is just allocated by qemu_new_net_client() via
g_malloc0() in net_vhost_vdpa_init(). So s->vhost_net is NULL for
sure, let's remove this unnecessary check in vhost_vdpa_add().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-7-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to initialize dev.nvqs from the VhostNetOptions
instead of assuming it was 2. This is useful for implementing control
virtqueue support which will be a single vhost_net structure with a
single cvq.
Note that nvqs is still set to 2 for all users and this patch does not
change functionality.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-6-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"acked_features" is unused, let's remove that.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When RSS is enabled the device tries to load the eBPF program
to select RX virtqueue in the TUN. If eBPF can be loaded
the RSS will function also with vhost (works with kernel 5.8 and later).
Software RSS is used as a fallback with vhost=off when eBPF can't be loaded
or when hash population requested by the guest.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Several issues has been reported for query-netdev series. Consider
it's late in the rc, this reverts commit
d32ad10a14d46dfe9304e3ed5858a11dcd5c71a0.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Several issues has been reported for query-netdev info
series. Consider it's late in the rc, this reverts commit
commit 59b5437eb732d6b103a9bc279c3482c834d1eff9.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Several issues has been reported for query-netdev info
series. Consider it's late in the rc, this reverts commit
f2e8319d456724c3d8514d943dc4607e2f08e88a.
Signed-off-by: Jason Wang <jasowang@redhat.com>
As we use QAPI NetClientState->stored_config to store and get information
about backend network devices, we can drop fill of legacy field info_str
for them.
We still use info_str field for NIC and hubports, so we can not completely
remove it.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The info_str field of the NetClientState structure is static and has a size
of 256 bytes. This amount is often unclaimed, and the field itself is used
exclusively for HMP "info network".
The patch translates info_str to dynamic memory allocation.
This action is also allows us to painlessly discard usage of this field
for backend devices.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The query-netdev command is used to get the configuration of the current
network device backends (netdevs).
This is the QMP analog of the HMP command "info network" but only for
netdevs (i.e. excluding NIC and hubports).
The query-netdev command returns an array of objects of the NetdevInfo
type, which are an extension of Netdev type. It means that response can
be used for netdev-add after small modification. This can be useful for
recreate the same netdev configuration.
Information about the network device is filled in when it is created or
modified and is available through the NetClientState->stored_config.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
fix the bug that fd will still open after the cleanup
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20201016030909.9522-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
