tests: add gcov support

Add support for compiling for GCOV test coverage, enabled
with '--enable-gcov' during configure.

Test coverage will be reported after each test.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Makefile.objs

@@ -31,6 +31,8 @@ oslib-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-thread-posix.o
 # coroutines
 coroutine-obj-y = qemu-coroutine.o qemu-coroutine-lock.o qemu-coroutine-io.o
 coroutine-obj-y += qemu-coroutine-sleep.o
+
+# If you change this logic, please also check tests/Makefile
 ifeq ($(CONFIG_UCONTEXT_COROUTINE),y)
 coroutine-obj-$(CONFIG_POSIX) += coroutine-ucontext.o
 else

configure

@@ -176,6 +176,8 @@ strip_opt="yes"
 tcg_interpreter="no"
 bigendian="no"
 mingw32="no"
+gcov="no"
+gcov_tool="gcov"
 EXESUF=""
 prefix="/usr/local"
 mandir="\${prefix}/share/man"
@@ -600,6 +602,8 @@ for opt do
   ;;
   --python=*) python="$optarg"
   ;;
+  --gcov=*) gcov_tool="$optarg"
+  ;;
   --smbd=*) smbd="$optarg"
   ;;
   --extra-cflags=*)
@@ -620,6 +624,8 @@ for opt do
   ;;
   --enable-gprof) gprof="yes"
   ;;
+  --enable-gcov) gcov="yes"
+  ;;
   --static)
     static="yes"
     LDFLAGS="-static $LDFLAGS"
@@ -1134,6 +1140,8 @@ echo "  --with-coroutine=BACKEND coroutine backend. Supported options:"
 echo "                           gthread, ucontext, sigaltstack, windows"
 echo "  --enable-glusterfs       enable GlusterFS backend"
 echo "  --disable-glusterfs      disable GlusterFS backend"
+echo "  --enable-gcov            enable test coverage analysis with gcov"
+echo "  --gcov=GCOV              use specified gcov [$gcov_tool]"
 echo ""
 echo "NOTE: The object files are built at the place where configure is launched"
 exit 1
@@ -3120,10 +3128,14 @@ fi
 # End of CC checks
 # After here, no more $cc or $ld runs
 
-if test "$debug" = "no" ; then
+if test "$gcov" = "yes" ; then
+  CFLAGS="-fprofile-arcs -ftest-coverage -g $CFLAGS"
+  LDFLAGS="-fprofile-arcs -ftest-coverage $LDFLAGS"
+elif test "$debug" = "no" ; then
   CFLAGS="-O2 -D_FORTIFY_SOURCE=2 $CFLAGS"
 fi
 
+
 # Disable zero malloc errors for official releases unless explicitly told to
 # enable/disable
 if test -z "$zero_malloc" ; then
@@ -3305,6 +3317,8 @@ echo "seccomp support   $seccomp"
 echo "coroutine backend $coroutine_backend"
 echo "GlusterFS support $glusterfs"
 echo "virtio-blk-data-plane $virtio_blk_data_plane"
+echo "gcov              $gcov_tool"
+echo "gcov enabled      $gcov"
 
 if test "$sdl_too_old" = "yes"; then
 echo "-> Your SDL version is too old - please upgrade to have SDL support"
@@ -3738,6 +3752,10 @@ echo "EXESUF=$EXESUF" >> $config_host_mak
 echo "LIBS_QGA+=$libs_qga" >> $config_host_mak
 echo "POD2MAN=$POD2MAN" >> $config_host_mak
 echo "TRANSLATE_OPT_CFLAGS=$TRANSLATE_OPT_CFLAGS" >> $config_host_mak
+if test "$gcov" = "yes" ; then
+  echo "CONFIG_GCOV=y" >> $config_host_mak
+  echo "GCOV=$gcov_tool" >> $config_host_mak
+fi
 
 # generate list of library paths for linker script
 

tests/Makefile

@@ -1,33 +1,65 @@
 export SRC_PATH
 
 check-unit-y = tests/check-qdict$(EXESUF)
+gcov-files-check-qdict-y = qdict.c
 check-unit-y += tests/check-qfloat$(EXESUF)
+gcov-files-check-qfloat-y = qfloat.c
 check-unit-y += tests/check-qint$(EXESUF)
+gcov-files-check-qint-y = qint.c
 check-unit-y += tests/check-qstring$(EXESUF)
+gcov-files-check-qstring-y = qstring.c
 check-unit-y += tests/check-qlist$(EXESUF)
+gcov-files-check-qlist-y = qlist.c
 check-unit-y += tests/check-qjson$(EXESUF)
+gcov-files-check-qjson-y = qjson.c
 check-unit-y += tests/test-qmp-output-visitor$(EXESUF)
+gcov-files-test-qmp-output-visitor-y = qapi/qmp-output-visitor.c
 check-unit-y += tests/test-qmp-input-visitor$(EXESUF)
+gcov-files-test-qmp-input-visitor-y = qapi/qmp-input-visitor.c
 check-unit-y += tests/test-qmp-input-strict$(EXESUF)
 check-unit-y += tests/test-qmp-commands$(EXESUF)
+gcov-files-test-qmp-commands-y = qapi/qmp-dispatch.c
 check-unit-y += tests/test-string-input-visitor$(EXESUF)
+gcov-files-test-string-input-visitor-y = qapi/string-input-visitor.c
 check-unit-y += tests/test-string-output-visitor$(EXESUF)
+gcov-files-test-string-output-visitor-y = qapi/string-output-visitor.c
 check-unit-y += tests/test-coroutine$(EXESUF)
+ifeq ($(CONFIG_WIN32),y)
+gcov-files-test-coroutine-y = coroutine-win32.c
+else
+ifeq ($(CONFIG_UCONTEXT_COROUTINE),y)
+gcov-files-test-coroutine-y = coroutine-ucontext.c
+else
+ifeq ($(CONFIG_SIGALTSTACK_COROUTINE),y)
+gcov-files-test-coroutine-y = coroutine-sigaltstack.c
+else
+gcov-files-test-coroutine-y = coroutine-gthread.c
+endif
+endif
+endif
 check-unit-y += tests/test-visitor-serialization$(EXESUF)
 check-unit-y += tests/test-iov$(EXESUF)
+gcov-files-test-iov-y = iov.c
 check-unit-y += tests/test-aio$(EXESUF)
+gcov-files-test-aio-$(CONFIG_WIN32) = aio-win32.c
+gcov-files-test-aio-$(CONFIG_POSIX) = aio-posix.c
 check-unit-y += tests/test-thread-pool$(EXESUF)
+gcov-files-test-thread-pool-y = thread-pool.c
 
 check-block-$(CONFIG_POSIX) += tests/qemu-iotests-quick.sh
 
 # All QTests for now are POSIX-only, but the dependencies are
 # really in libqtest, not in the testcases themselves.
 check-qtest-i386-y = tests/fdc-test$(EXESUF)
+gcov-files-i386-y = hw/fdc.c
 check-qtest-i386-y += tests/hd-geo-test$(EXESUF)
+gcov-files-i386-y += hw/hd-geometry.c
 check-qtest-i386-y += tests/rtc-test$(EXESUF)
 check-qtest-x86_64-y = $(check-qtest-i386-y)
+gcov-files-i386-y += i386-softmmu/hw/mc146818rtc.c
 check-qtest-sparc-y = tests/m48t59-test$(EXESUF)
 check-qtest-sparc64-y = tests/m48t59-test$(EXESUF)
+gcov-files-sparc-y += hw/m48t59.c
 
 GENERATED_HEADERS += tests/test-qapi-types.h tests/test-qapi-visit.h tests/test-qmp-commands.h
 
@@ -108,17 +140,28 @@ check-help:
 
 SPEED = quick
 GTESTER_OPTIONS = -k $(if $(V),--verbose,-q)
+GCOV_OPTIONS = -n $(if $(V),-f,)
 
 # gtester tests, possibly with verbose output
 
 .PHONY: $(patsubst %, check-qtest-%, $(QTEST_TARGETS))
 $(patsubst %, check-qtest-%, $(QTEST_TARGETS)): check-qtest-%: $(check-qtest-y)
+	$(if $(CONFIG_GCOV),@rm -f *.gcda */*.gcda */*/*.gcda */*/*/*.gcda,)
 	$(call quiet-command,QTEST_QEMU_BINARY=$*-softmmu/qemu-system-$* \
 		gtester $(GTESTER_OPTIONS) -m=$(SPEED) $(check-qtest-$*-y),"GTESTER $@")
+	$(if $(CONFIG_GCOV),@for f in $(gcov-files-$*-y); do \
+	  echo Gcov report for $$f:;\
+	  $(GCOV) $(GCOV_OPTIONS) $$f -o `dirname $$f`; \
+	done,)
 
 .PHONY: $(patsubst %, check-%, $(check-unit-y))
 $(patsubst %, check-%, $(check-unit-y)): check-%: %
+	$(if $(CONFIG_GCOV),@rm -f *.gcda */*.gcda */*/*.gcda */*/*/*.gcda,)
 	$(call quiet-command,gtester $(GTESTER_OPTIONS) -m=$(SPEED) $*,"GTESTER $*")
+	$(if $(CONFIG_GCOV),@for f in $(gcov-files-$(subst tests/,,$*)-y); do \
+	  echo Gcov report for $$f:;\
+	  $(GCOV) $(GCOV_OPTIONS) $$f -o `dirname $$f`; \
+	done,)
 
 # gtester tests with XML output