david.venhoff/QEMU-Nyx-fork
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
QEMU-Nyx-fork/linux-user/socket.h
Petar Jovanovic f651e6ae55 linux-user: improve target_to_host_sock_type conversion 
Previous implementation has failed to take into account different value of
SOCK_NONBLOCK on target and host, and existence of SOCK_CLOEXEC.
The same conversion has to be applied both for do_socket and do_socketpair,
so the code has been isolated in a static inline function.

enum sock_type in linux-user/socket.h has been extended to include
TARGET_SOCK_CLOEXEC and TARGET_SOCK_NONBLOCK, similar to definition in libc.
The patch also includes necessary code style changes (tab to spaces) in the
header file since most of the file has been touched by this change.

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Message-id: 1372639454-7560-1-git-send-email-petar.jovanovic@rt-rk.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-05 15:45:40 +03:00

336 lines
12 KiB
C
Raw Blame History

#if defined(TARGET_MIPS)
/* MIPS special values for constants */
/*
* For setsockopt(2)
*
* This defines are ABI conformant as far as Linux supports these ...
*/
#define TARGET_SOL_SOCKET 0xffff
#define TARGET_SO_DEBUG 0x0001 /* Record debugging information. */
#define TARGET_SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */
#define TARGET_SO_KEEPALIVE 0x0008 /* Keep connections alive and send
SIGPIPE when they die. */
#define TARGET_SO_DONTROUTE 0x0010 /* Don't do local routing. */
#define TARGET_SO_BROADCAST 0x0020 /* Allow transmission of
broadcast messages. */
#define TARGET_SO_LINGER 0x0080 /* Block on close of a reliable
* socket to transmit pending data.
*/
#define TARGET_SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band.
*/
#if 0
/* To add: Allow local address and port reuse. */
#define TARGET_SO_REUSEPORT 0x0200
#endif
#define TARGET_SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */
#define TARGET_SO_STYLE SO_TYPE /* Synonym */
#define TARGET_SO_ERROR 0x1007 /* get error status and clear */
#define TARGET_SO_SNDBUF 0x1001 /* Send buffer size. */
#define TARGET_SO_RCVBUF 0x1002 /* Receive buffer. */
#define TARGET_SO_SNDLOWAT 0x1003 /* send low-water mark */
#define TARGET_SO_RCVLOWAT 0x1004 /* receive low-water mark */
#define TARGET_SO_SNDTIMEO 0x1005 /* send timeout */
#define TARGET_SO_RCVTIMEO 0x1006 /* receive timeout */
#define TARGET_SO_ACCEPTCONN 0x1009
/* linux-specific, might as well be the same as on i386 */
#define TARGET_SO_NO_CHECK 11
#define TARGET_SO_PRIORITY 12
#define TARGET_SO_BSDCOMPAT 14
#define TARGET_SO_PASSCRED 17
#define TARGET_SO_PEERCRED 18
/* Security levels - as per NRL IPv6 - don't actually do anything */
#define TARGET_SO_SECURITY_AUTHENTICATION 22
#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 23
#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 24
#define TARGET_SO_BINDTODEVICE 25
/* Socket filtering */
#define TARGET_SO_ATTACH_FILTER 26
#define TARGET_SO_DETACH_FILTER 27
#define TARGET_SO_PEERNAME 28
#define TARGET_SO_TIMESTAMP 29
#define SCM_TIMESTAMP SO_TIMESTAMP
#define TARGET_SO_PEERSEC 30
#define TARGET_SO_SNDBUFFORCE 31
#define TARGET_SO_RCVBUFFORCE 33
/** sock_type - Socket types
*
* Please notice that for binary compat reasons MIPS has to
* override the enum sock_type in include/linux/net.h, so
* we define ARCH_HAS_SOCKET_TYPES here.
*
* @SOCK_DGRAM - datagram (conn.less) socket
* @SOCK_STREAM - stream (connection) socket
* @SOCK_RAW - raw socket
* @SOCK_RDM - reliably-delivered message
* @SOCK_SEQPACKET - sequential packet socket
* @SOCK_DCCP - Datagram Congestion Control Protocol socket
* @SOCK_PACKET - linux specific way of getting packets at the dev level.
* For writing rarp and other similar things on the user
* level.
* @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
* @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
*/
#define ARCH_HAS_SOCKET_TYPES 1
enum sock_type {
TARGET_SOCK_DGRAM = 1,
TARGET_SOCK_STREAM = 2,
TARGET_SOCK_RAW = 3,
TARGET_SOCK_RDM = 4,
TARGET_SOCK_SEQPACKET = 5,
TARGET_SOCK_DCCP = 6,
TARGET_SOCK_PACKET = 10,
TARGET_SOCK_CLOEXEC = 02000000,
TARGET_SOCK_NONBLOCK = 0200,
};
#define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
#define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */
#elif defined(TARGET_ALPHA)
/* For setsockopt(2) */
#define TARGET_SOL_SOCKET 0xffff
#define TARGET_SO_DEBUG 0x0001
#define TARGET_SO_REUSEADDR 0x0004
#define TARGET_SO_KEEPALIVE 0x0008
#define TARGET_SO_DONTROUTE 0x0010
#define TARGET_SO_BROADCAST 0x0020
#define TARGET_SO_LINGER 0x0080
#define TARGET_SO_OOBINLINE 0x0100
/* To add :#define TARGET_SO_REUSEPORT 0x0200 */
#define TARGET_SO_TYPE 0x1008
#define TARGET_SO_ERROR 0x1007
#define TARGET_SO_SNDBUF 0x1001
#define TARGET_SO_RCVBUF 0x1002
#define TARGET_SO_SNDBUFFORCE 0x100a
#define TARGET_SO_RCVBUFFORCE 0x100b
#define TARGET_SO_RCVLOWAT 0x1010
#define TARGET_SO_SNDLOWAT 0x1011
#define TARGET_SO_RCVTIMEO 0x1012
#define TARGET_SO_SNDTIMEO 0x1013
#define TARGET_SO_ACCEPTCONN 0x1014
#define TARGET_SO_PROTOCOL 0x1028
#define TARGET_SO_DOMAIN 0x1029
/* linux-specific, might as well be the same as on i386 */
#define TARGET_SO_NO_CHECK 11
#define TARGET_SO_PRIORITY 12
#define TARGET_SO_BSDCOMPAT 14
#define TARGET_SO_PASSCRED 17
#define TARGET_SO_PEERCRED 18
#define TARGET_SO_BINDTODEVICE 25
/* Socket filtering */
#define TARGET_SO_ATTACH_FILTER 26
#define TARGET_SO_DETACH_FILTER 27
#define TARGET_SO_PEERNAME 28
#define TARGET_SO_TIMESTAMP 29
#define TARGET_SCM_TIMESTAMP TARGET_SO_TIMESTAMP
#define TARGET_SO_PEERSEC 30
#define TARGET_SO_PASSSEC 34
#define TARGET_SO_TIMESTAMPNS 35
#define TARGET_SCM_TIMESTAMPNS TARGET_SO_TIMESTAMPNS
/* Security levels - as per NRL IPv6 - don't actually do anything */
#define TARGET_SO_SECURITY_AUTHENTICATION 19
#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 20
#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 21
#define TARGET_SO_MARK 36
#define TARGET_SO_TIMESTAMPING 37
#define TARGET_SCM_TIMESTAMPING TARGET_SO_TIMESTAMPING
#define TARGET_SO_RXQ_OVFL 40
#define TARGET_SO_WIFI_STATUS 41
#define TARGET_SCM_WIFI_STATUS TARGET_SO_WIFI_STATUS
#define TARGET_SO_PEEK_OFF 42
/* Instruct lower device to use last 4-bytes of skb data as FCS */
#define TARGET_SO_NOFCS 43
/** sock_type - Socket types
*
* Please notice that for binary compat reasons ALPHA has to
* override the enum sock_type in include/linux/net.h, so
* we define ARCH_HAS_SOCKET_TYPES here.
*
* @SOCK_DGRAM - datagram (conn.less) socket
* @SOCK_STREAM - stream (connection) socket
* @SOCK_RAW - raw socket
* @SOCK_RDM - reliably-delivered message
* @SOCK_SEQPACKET - sequential packet socket
* @SOCK_DCCP - Datagram Congestion Control Protocol socket
* @SOCK_PACKET - linux specific way of getting packets at the dev level.
* For writing rarp and other similar things on the user
* level.
* @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
* @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
*/
#define ARCH_HAS_SOCKET_TYPES 1
enum sock_type {
TARGET_SOCK_STREAM = 1,
TARGET_SOCK_DGRAM = 2,
TARGET_SOCK_RAW = 3,
TARGET_SOCK_RDM = 4,
TARGET_SOCK_SEQPACKET = 5,
TARGET_SOCK_DCCP = 6,
TARGET_SOCK_PACKET = 10,
TARGET_SOCK_CLOEXEC = 010000000,
TARGET_SOCK_NONBLOCK = 010000000000,
};
#define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
#define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */
#else
#if defined(TARGET_SPARC)
/** sock_type - Socket types
*
* Please notice that for binary compat reasons SPARC has to
* override the enum sock_type in include/linux/net.h, so
* we define ARCH_HAS_SOCKET_TYPES here.
*
* @SOCK_DGRAM - datagram (conn.less) socket
* @SOCK_STREAM - stream (connection) socket
* @SOCK_RAW - raw socket
* @SOCK_RDM - reliably-delivered message
* @SOCK_SEQPACKET - sequential packet socket
* @SOCK_DCCP - Datagram Congestion Control Protocol socket
* @SOCK_PACKET - linux specific way of getting packets at the dev level.
* For writing rarp and other similar things on the user
* level.
* @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
* @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
*/
#define ARCH_HAS_SOCKET_TYPES 1
enum sock_type {
TARGET_SOCK_STREAM = 1,
TARGET_SOCK_DGRAM = 2,
TARGET_SOCK_RAW = 3,
TARGET_SOCK_RDM = 4,
TARGET_SOCK_SEQPACKET = 5,
TARGET_SOCK_DCCP = 6,
TARGET_SOCK_PACKET = 10,
TARGET_SOCK_CLOEXEC = 020000000,
TARGET_SOCK_NONBLOCK = 040000,
};
#define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
#define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */
#endif
/* For setsockopt(2) */
#define TARGET_SOL_SOCKET 1
#define TARGET_SO_DEBUG 1
#define TARGET_SO_REUSEADDR 2
#define TARGET_SO_TYPE 3
#define TARGET_SO_ERROR 4
#define TARGET_SO_DONTROUTE 5
#define TARGET_SO_BROADCAST 6
#define TARGET_SO_SNDBUF 7
#define TARGET_SO_RCVBUF 8
#define TARGET_SO_SNDBUFFORCE 32
#define TARGET_SO_RCVBUFFORCE 33
#define TARGET_SO_KEEPALIVE 9
#define TARGET_SO_OOBINLINE 10
#define TARGET_SO_NO_CHECK 11
#define TARGET_SO_PRIORITY 12
#define TARGET_SO_LINGER 13
#define TARGET_SO_BSDCOMPAT 14
/* To add :#define TARGET_SO_REUSEPORT 15 */
#if defined(TARGET_PPC)
#define TARGET_SO_RCVLOWAT 16
#define TARGET_SO_SNDLOWAT 17
#define TARGET_SO_RCVTIMEO 18
#define TARGET_SO_SNDTIMEO 19
#define TARGET_SO_PASSCRED 20
#define TARGET_SO_PEERCRED 21
#else
#define TARGET_SO_PASSCRED 16
#define TARGET_SO_PEERCRED 17
#define TARGET_SO_RCVLOWAT 18
#define TARGET_SO_SNDLOWAT 19
#define TARGET_SO_RCVTIMEO 20
#define TARGET_SO_SNDTIMEO 21
#endif
/* Security levels - as per NRL IPv6 - don't actually do anything */
#define TARGET_SO_SECURITY_AUTHENTICATION 22
#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 23
#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 24
#define TARGET_SO_BINDTODEVICE 25
/* Socket filtering */
#define TARGET_SO_ATTACH_FILTER 26
#define TARGET_SO_DETACH_FILTER 27
#define TARGET_SO_PEERNAME 28
#define TARGET_SO_TIMESTAMP 29
#define TARGET_SCM_TIMESTAMP TARGET_SO_TIMESTAMP
#define TARGET_SO_ACCEPTCONN 30
#define TARGET_SO_PEERSEC 31
#endif
#ifndef ARCH_HAS_SOCKET_TYPES
/** sock_type - Socket types - default values
*
*
* @SOCK_STREAM - stream (connection) socket
* @SOCK_DGRAM - datagram (conn.less) socket
* @SOCK_RAW - raw socket
* @SOCK_RDM - reliably-delivered message
* @SOCK_SEQPACKET - sequential packet socket
* @SOCK_DCCP - Datagram Congestion Control Protocol socket
* @SOCK_PACKET - linux specific way of getting packets at the dev level.
* For writing rarp and other similar things on the user
* level.
* @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
* @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
*/
enum sock_type {
TARGET_SOCK_STREAM = 1,
TARGET_SOCK_DGRAM = 2,
TARGET_SOCK_RAW = 3,
TARGET_SOCK_RDM = 4,
TARGET_SOCK_SEQPACKET = 5,
TARGET_SOCK_DCCP = 6,
TARGET_SOCK_PACKET = 10,
TARGET_SOCK_CLOEXEC = 02000000,
TARGET_SOCK_NONBLOCK = 04000,
};
#define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
#define TARGET_SOCK_TYPE_MASK 0xf /* Covers up to TARGET_SOCK_MAX-1. */
#endif
Reference in New Issue View Git Blame Copy Permalink