tresor.bessoh
/
linuxdebug
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linuxdebug/drivers/net/dsa/qca/qca8k-8xxx.c

2080 lines
52 KiB
C
Raw Permalink Normal View History

null pointer error
2024-07-16 15:50:57 +02:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
* Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
* Copyright (c) 2016 John Crispin <john@phrozen.org>
*/
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
#include <linux/bitfield.h>
#include <linux/regmap.h>
#include <net/dsa.h>
#include <linux/of_net.h>
#include <linux/of_mdio.h>
#include <linux/of_platform.h>
#include <linux/mdio.h>
#include <linux/phylink.h>
#include <linux/gpio/consumer.h>
#include <linux/etherdevice.h>
#include <linux/dsa/tag_qca.h>
#include "qca8k.h"
static void
qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
{
regaddr >>= 1;
*r1 = regaddr & 0x1e;
regaddr >>= 5;
*r2 = regaddr & 0x7;
regaddr >>= 3;
*page = regaddr & 0x3ff;
}
static int
qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
{
int ret;
ret = bus->read(bus, phy_id, regnum);
if (ret >= 0) {
*val = ret;
ret = bus->read(bus, phy_id, regnum + 1);
*val |= ret << 16;
}
if (ret < 0) {
dev_err_ratelimited(&bus->dev,
"failed to read qca8k 32bit register\n");
*val = 0;
return ret;
}
return 0;
}
static void
qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
{
u16 lo, hi;
int ret;
lo = val & 0xffff;
hi = (u16)(val >> 16);
ret = bus->write(bus, phy_id, regnum, lo);
if (ret >= 0)
ret = bus->write(bus, phy_id, regnum + 1, hi);
if (ret < 0)
dev_err_ratelimited(&bus->dev,
"failed to write qca8k 32bit register\n");
}
static int
qca8k_set_page(struct qca8k_priv *priv, u16 page)
{
u16 *cached_page = &priv->mdio_cache.page;
struct mii_bus *bus = priv->bus;
int ret;
if (page == *cached_page)
return 0;
ret = bus->write(bus, 0x18, 0, page);
if (ret < 0) {
dev_err_ratelimited(&bus->dev,
"failed to set qca8k page\n");
return ret;
}
*cached_page = page;
usleep_range(1000, 2000);
return 0;
}
static void qca8k_rw_reg_ack_handler(struct dsa_switch *ds, struct sk_buff *skb)
{
struct qca8k_mgmt_eth_data *mgmt_eth_data;
struct qca8k_priv *priv = ds->priv;
struct qca_mgmt_ethhdr *mgmt_ethhdr;
u32 command;
u8 len, cmd;
int i;
mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb_mac_header(skb);
mgmt_eth_data = &priv->mgmt_eth_data;
command = get_unaligned_le32(&mgmt_ethhdr->command);
cmd = FIELD_GET(QCA_HDR_MGMT_CMD, command);
len = FIELD_GET(QCA_HDR_MGMT_LENGTH, command);
/* Special case for len of 15 as this is the max value for len and needs to
* be increased before converting it from word to dword.
*/
if (len == 15)
len++;
/* We can ignore odd value, we always round up them in the alloc function. */
len *= sizeof(u16);
/* Make sure the seq match the requested packet */
if (get_unaligned_le32(&mgmt_ethhdr->seq) == mgmt_eth_data->seq)
mgmt_eth_data->ack = true;
if (cmd == MDIO_READ) {
u32 *val = mgmt_eth_data->data;
*val = get_unaligned_le32(&mgmt_ethhdr->mdio_data);
/* Get the rest of the 12 byte of data.
* The read/write function will extract the requested data.
*/
if (len > QCA_HDR_MGMT_DATA1_LEN) {
__le32 *data2 = (__le32 *)skb->data;
int data_len = min_t(int, QCA_HDR_MGMT_DATA2_LEN,
len - QCA_HDR_MGMT_DATA1_LEN);
val++;
for (i = sizeof(u32); i <= data_len; i += sizeof(u32)) {
*val = get_unaligned_le32(data2);
val++;
data2++;
}
}
}
complete(&mgmt_eth_data->rw_done);
}
static struct sk_buff *qca8k_alloc_mdio_header(enum mdio_cmd cmd, u32 reg, u32 *val,
int priority, unsigned int len)
{
struct qca_mgmt_ethhdr *mgmt_ethhdr;
unsigned int real_len;
struct sk_buff *skb;
__le32 *data2;
u32 command;
u16 hdr;
int i;
skb = dev_alloc_skb(QCA_HDR_MGMT_PKT_LEN);
if (!skb)
return NULL;
/* Hdr mgmt length value is in step of word size.
* As an example to process 4 byte of data the correct length to set is 2.
* To process 8 byte 4, 12 byte 6, 16 byte 8...
*
* Odd values will always return the next size on the ack packet.
* (length of 3 (6 byte) will always return 8 bytes of data)
*
* This means that a value of 15 (0xf) actually means reading/writing 32 bytes
* of data.
*
* To correctly calculate the length we devide the requested len by word and
* round up.
* On the ack function we can skip the odd check as we already handle the
* case here.
*/
real_len = DIV_ROUND_UP(len, sizeof(u16));
/* We check if the result len is odd and we round up another time to
* the next size. (length of 3 will be increased to 4 as switch will always
* return 8 bytes)
*/
if (real_len % sizeof(u16) != 0)
real_len++;
/* Max reg value is 0xf(15) but switch will always return the next size (32 byte) */
if (real_len == 16)
real_len--;
skb_reset_mac_header(skb);
skb_set_network_header(skb, skb->len);
mgmt_ethhdr = skb_push(skb, QCA_HDR_MGMT_HEADER_LEN + QCA_HDR_LEN);
hdr = FIELD_PREP(QCA_HDR_XMIT_VERSION, QCA_HDR_VERSION);
hdr |= FIELD_PREP(QCA_HDR_XMIT_PRIORITY, priority);
hdr |= QCA_HDR_XMIT_FROM_CPU;
hdr |= FIELD_PREP(QCA_HDR_XMIT_DP_BIT, BIT(0));
hdr |= FIELD_PREP(QCA_HDR_XMIT_CONTROL, QCA_HDR_XMIT_TYPE_RW_REG);
command = FIELD_PREP(QCA_HDR_MGMT_ADDR, reg);
command |= FIELD_PREP(QCA_HDR_MGMT_LENGTH, real_len);
command |= FIELD_PREP(QCA_HDR_MGMT_CMD, cmd);
command |= FIELD_PREP(QCA_HDR_MGMT_CHECK_CODE,
QCA_HDR_MGMT_CHECK_CODE_VAL);
put_unaligned_le32(command, &mgmt_ethhdr->command);
if (cmd == MDIO_WRITE)
put_unaligned_le32(*val, &mgmt_ethhdr->mdio_data);
mgmt_ethhdr->hdr = htons(hdr);
data2 = skb_put_zero(skb, QCA_HDR_MGMT_DATA2_LEN + QCA_HDR_MGMT_PADDING_LEN);
if (cmd == MDIO_WRITE && len > QCA_HDR_MGMT_DATA1_LEN) {
int data_len = min_t(int, QCA_HDR_MGMT_DATA2_LEN,
len - QCA_HDR_MGMT_DATA1_LEN);
val++;
for (i = sizeof(u32); i <= data_len; i += sizeof(u32)) {
put_unaligned_le32(*val, data2);
data2++;
val++;
}
}
return skb;
}
static void qca8k_mdio_header_fill_seq_num(struct sk_buff *skb, u32 seq_num)
{
struct qca_mgmt_ethhdr *mgmt_ethhdr;
u32 seq;
seq = FIELD_PREP(QCA_HDR_MGMT_SEQ_NUM, seq_num);
mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb->data;
put_unaligned_le32(seq, &mgmt_ethhdr->seq);
}
static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
{
struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data;
struct sk_buff *skb;
bool ack;
int ret;
skb = qca8k_alloc_mdio_header(MDIO_READ, reg, NULL,
QCA8K_ETHERNET_MDIO_PRIORITY, len);
if (!skb)
return -ENOMEM;
mutex_lock(&mgmt_eth_data->mutex);
/* Check mgmt_master if is operational */
if (!priv->mgmt_master) {
kfree_skb(skb);
mutex_unlock(&mgmt_eth_data->mutex);
return -EINVAL;
}
skb->dev = priv->mgmt_master;
reinit_completion(&mgmt_eth_data->rw_done);
/* Increment seq_num and set it in the mdio pkt */
mgmt_eth_data->seq++;
qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq);
mgmt_eth_data->ack = false;
dev_queue_xmit(skb);
ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done,
msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT));
*val = mgmt_eth_data->data[0];
if (len > QCA_HDR_MGMT_DATA1_LEN)
memcpy(val + 1, mgmt_eth_data->data + 1, len - QCA_HDR_MGMT_DATA1_LEN);
ack = mgmt_eth_data->ack;
mutex_unlock(&mgmt_eth_data->mutex);
if (ret <= 0)
return -ETIMEDOUT;
if (!ack)
return -EINVAL;
return 0;
}
static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
{
struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data;
struct sk_buff *skb;
bool ack;
int ret;
skb = qca8k_alloc_mdio_header(MDIO_WRITE, reg, val,
QCA8K_ETHERNET_MDIO_PRIORITY, len);
if (!skb)
return -ENOMEM;
mutex_lock(&mgmt_eth_data->mutex);
/* Check mgmt_master if is operational */
if (!priv->mgmt_master) {
kfree_skb(skb);
mutex_unlock(&mgmt_eth_data->mutex);
return -EINVAL;
}
skb->dev = priv->mgmt_master;
reinit_completion(&mgmt_eth_data->rw_done);
/* Increment seq_num and set it in the mdio pkt */
mgmt_eth_data->seq++;
qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq);
mgmt_eth_data->ack = false;
dev_queue_xmit(skb);
ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done,
msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT));
ack = mgmt_eth_data->ack;
mutex_unlock(&mgmt_eth_data->mutex);
if (ret <= 0)
return -ETIMEDOUT;
if (!ack)
return -EINVAL;
return 0;
}
static int
qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
{
u32 val = 0;
int ret;
ret = qca8k_read_eth(priv, reg, &val, sizeof(val));
if (ret)
return ret;
val &= ~mask;
val |= write_val;
return qca8k_write_eth(priv, reg, &val, sizeof(val));
}
static int
qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
struct mii_bus *bus = priv->bus;
u16 r1, r2, page;
int ret;
if (!qca8k_read_eth(priv, reg, val, sizeof(*val)))
return 0;
qca8k_split_addr(reg, &r1, &r2, &page);
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = qca8k_set_page(priv, page);
if (ret < 0)
goto exit;
ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val);
exit:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static int
qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
struct mii_bus *bus = priv->bus;
u16 r1, r2, page;
int ret;
if (!qca8k_write_eth(priv, reg, &val, sizeof(val)))
return 0;
qca8k_split_addr(reg, &r1, &r2, &page);
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = qca8k_set_page(priv, page);
if (ret < 0)
goto exit;
qca8k_mii_write32(bus, 0x10 | r2, r1, val);
exit:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static int
qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
struct mii_bus *bus = priv->bus;
u16 r1, r2, page;
u32 val;
int ret;
if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val))
return 0;
qca8k_split_addr(reg, &r1, &r2, &page);
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = qca8k_set_page(priv, page);
if (ret < 0)
goto exit;
ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
if (ret < 0)
goto exit;
val &= ~mask;
val |= write_val;
qca8k_mii_write32(bus, 0x10 | r2, r1, val);
exit:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static struct regmap_config qca8k_regmap_config = {
.reg_bits = 16,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0x16ac, /* end MIB - Port6 range */
.reg_read = qca8k_regmap_read,
.reg_write = qca8k_regmap_write,
.reg_update_bits = qca8k_regmap_update_bits,
.rd_table = &qca8k_readable_table,
.disable_locking = true, /* Locking is handled by qca8k read/write */
.cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */
};
static int
qca8k_phy_eth_busy_wait(struct qca8k_mgmt_eth_data *mgmt_eth_data,
struct sk_buff *read_skb, u32 *val)
{
struct sk_buff *skb = skb_copy(read_skb, GFP_KERNEL);
bool ack;
int ret;
if (!skb)
return -ENOMEM;
reinit_completion(&mgmt_eth_data->rw_done);
/* Increment seq_num and set it in the copy pkt */
mgmt_eth_data->seq++;
qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq);
mgmt_eth_data->ack = false;
dev_queue_xmit(skb);
ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done,
QCA8K_ETHERNET_TIMEOUT);
ack = mgmt_eth_data->ack;
if (ret <= 0)
return -ETIMEDOUT;
if (!ack)
return -EINVAL;
*val = mgmt_eth_data->data[0];
return 0;
}
static int
qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy,
int regnum, u16 data)
{
struct sk_buff *write_skb, *clear_skb, *read_skb;
struct qca8k_mgmt_eth_data *mgmt_eth_data;
u32 write_val, clear_val = 0, val;
struct net_device *mgmt_master;
int ret, ret1;
bool ack;
if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
return -EINVAL;
mgmt_eth_data = &priv->mgmt_eth_data;
write_val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
QCA8K_MDIO_MASTER_REG_ADDR(regnum);
if (read) {
write_val |= QCA8K_MDIO_MASTER_READ;
} else {
write_val |= QCA8K_MDIO_MASTER_WRITE;
write_val |= QCA8K_MDIO_MASTER_DATA(data);
}
/* Prealloc all the needed skb before the lock */
write_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &write_val,
QCA8K_ETHERNET_PHY_PRIORITY, sizeof(write_val));
if (!write_skb)
return -ENOMEM;
clear_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &clear_val,
QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val));
if (!clear_skb) {
ret = -ENOMEM;
goto err_clear_skb;
}
read_skb = qca8k_alloc_mdio_header(MDIO_READ, QCA8K_MDIO_MASTER_CTRL, &clear_val,
QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val));
if (!read_skb) {
ret = -ENOMEM;
goto err_read_skb;
}
/* Actually start the request:
* 1. Send mdio master packet
* 2. Busy Wait for mdio master command
* 3. Get the data if we are reading
* 4. Reset the mdio master (even with error)
*/
mutex_lock(&mgmt_eth_data->mutex);
/* Check if mgmt_master is operational */
mgmt_master = priv->mgmt_master;
if (!mgmt_master) {
mutex_unlock(&mgmt_eth_data->mutex);
ret = -EINVAL;
goto err_mgmt_master;
}
read_skb->dev = mgmt_master;
clear_skb->dev = mgmt_master;
write_skb->dev = mgmt_master;
reinit_completion(&mgmt_eth_data->rw_done);
/* Increment seq_num and set it in the write pkt */
mgmt_eth_data->seq++;
qca8k_mdio_header_fill_seq_num(write_skb, mgmt_eth_data->seq);
mgmt_eth_data->ack = false;
dev_queue_xmit(write_skb);
ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done,
QCA8K_ETHERNET_TIMEOUT);
ack = mgmt_eth_data->ack;
if (ret <= 0) {
ret = -ETIMEDOUT;
kfree_skb(read_skb);
goto exit;
}
if (!ack) {
ret = -EINVAL;
kfree_skb(read_skb);
goto exit;
}
ret = read_poll_timeout(qca8k_phy_eth_busy_wait, ret1,
!(val & QCA8K_MDIO_MASTER_BUSY), 0,
QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
mgmt_eth_data, read_skb, &val);
if (ret < 0 && ret1 < 0) {
ret = ret1;
goto exit;
}
if (read) {
reinit_completion(&mgmt_eth_data->rw_done);
/* Increment seq_num and set it in the read pkt */
mgmt_eth_data->seq++;
qca8k_mdio_header_fill_seq_num(read_skb, mgmt_eth_data->seq);
mgmt_eth_data->ack = false;
dev_queue_xmit(read_skb);
ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done,
QCA8K_ETHERNET_TIMEOUT);
ack = mgmt_eth_data->ack;
if (ret <= 0) {
ret = -ETIMEDOUT;
goto exit;
}
if (!ack) {
ret = -EINVAL;
goto exit;
}
ret = mgmt_eth_data->data[0] & QCA8K_MDIO_MASTER_DATA_MASK;
} else {
kfree_skb(read_skb);
}
exit:
reinit_completion(&mgmt_eth_data->rw_done);
/* Increment seq_num and set it in the clear pkt */
mgmt_eth_data->seq++;
qca8k_mdio_header_fill_seq_num(clear_skb, mgmt_eth_data->seq);
mgmt_eth_data->ack = false;
dev_queue_xmit(clear_skb);
wait_for_completion_timeout(&mgmt_eth_data->rw_done,
QCA8K_ETHERNET_TIMEOUT);
mutex_unlock(&mgmt_eth_data->mutex);
return ret;
/* Error handling before lock */
err_mgmt_master:
kfree_skb(read_skb);
err_read_skb:
kfree_skb(clear_skb);
err_clear_skb:
kfree_skb(write_skb);
return ret;
}
static u32
qca8k_port_to_phy(int port)
{
/* From Andrew Lunn:
* Port 0 has no internal phy.
* Port 1 has an internal PHY at MDIO address 0.
* Port 2 has an internal PHY at MDIO address 1.
* ...
* Port 5 has an internal PHY at MDIO address 4.
* Port 6 has no internal PHY.
*/
return port - 1;
}
static int
qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask)
{
u16 r1, r2, page;
u32 val;
int ret, ret1;
qca8k_split_addr(reg, &r1, &r2, &page);
ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0,
QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
bus, 0x10 | r2, r1, &val);
/* Check if qca8k_read has failed for a different reason
* before returnting -ETIMEDOUT
*/
if (ret < 0 && ret1 < 0)
return ret1;
return ret;
}
static int
qca8k_mdio_write(struct qca8k_priv *priv, int phy, int regnum, u16 data)
{
struct mii_bus *bus = priv->bus;
u16 r1, r2, page;
u32 val;
int ret;
if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
return -EINVAL;
val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
QCA8K_MDIO_MASTER_DATA(data);
qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = qca8k_set_page(priv, page);
if (ret)
goto exit;
qca8k_mii_write32(bus, 0x10 | r2, r1, val);
ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
QCA8K_MDIO_MASTER_BUSY);
exit:
/* even if the busy_wait timeouts try to clear the MASTER_EN */
qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
mutex_unlock(&bus->mdio_lock);
return ret;
}
static int
qca8k_mdio_read(struct qca8k_priv *priv, int phy, int regnum)
{
struct mii_bus *bus = priv->bus;
u16 r1, r2, page;
u32 val;
int ret;
if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
return -EINVAL;
val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
QCA8K_MDIO_MASTER_REG_ADDR(regnum);
qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = qca8k_set_page(priv, page);
if (ret)
goto exit;
qca8k_mii_write32(bus, 0x10 | r2, r1, val);
ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
QCA8K_MDIO_MASTER_BUSY);
if (ret)
goto exit;
ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
exit:
/* even if the busy_wait timeouts try to clear the MASTER_EN */
qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
mutex_unlock(&bus->mdio_lock);
if (ret >= 0)
ret = val & QCA8K_MDIO_MASTER_DATA_MASK;
return ret;
}
static int
qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data)
{
struct qca8k_priv *priv = slave_bus->priv;
int ret;
/* Use mdio Ethernet when available, fallback to legacy one on error */
ret = qca8k_phy_eth_command(priv, false, phy, regnum, data);
if (!ret)
return 0;
return qca8k_mdio_write(priv, phy, regnum, data);
}
static int
qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum)
{
struct qca8k_priv *priv = slave_bus->priv;
int ret;
/* Use mdio Ethernet when available, fallback to legacy one on error */
ret = qca8k_phy_eth_command(priv, true, phy, regnum, 0);
if (ret >= 0)
return ret;
ret = qca8k_mdio_read(priv, phy, regnum);
if (ret < 0)
return 0xffff;
return ret;
}
static int
qca8k_legacy_mdio_write(struct mii_bus *slave_bus, int port, int regnum, u16 data)
{
port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
return qca8k_internal_mdio_write(slave_bus, port, regnum, data);
}
static int
qca8k_legacy_mdio_read(struct mii_bus *slave_bus, int port, int regnum)
{
port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
return qca8k_internal_mdio_read(slave_bus, port, regnum);
}
static int
qca8k_mdio_register(struct qca8k_priv *priv)
{
struct dsa_switch *ds = priv->ds;
struct device_node *mdio;
struct mii_bus *bus;
bus = devm_mdiobus_alloc(ds->dev);
if (!bus)
return -ENOMEM;
bus->priv = (void *)priv;
snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d.%d",
ds->dst->index, ds->index);
bus->parent = ds->dev;
bus->phy_mask = ~ds->phys_mii_mask;
ds->slave_mii_bus = bus;
/* Check if the devicetree declare the port:phy mapping */
mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
if (of_device_is_available(mdio)) {
bus->name = "qca8k slave mii";
bus->read = qca8k_internal_mdio_read;
bus->write = qca8k_internal_mdio_write;
return devm_of_mdiobus_register(priv->dev, bus, mdio);
}
/* If a mapping can't be found the legacy mapping is used,
* using the qca8k_port_to_phy function
*/
bus->name = "qca8k-legacy slave mii";
bus->read = qca8k_legacy_mdio_read;
bus->write = qca8k_legacy_mdio_write;
return devm_mdiobus_register(priv->dev, bus);
}
static int
qca8k_setup_mdio_bus(struct qca8k_priv *priv)
{
u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
struct device_node *ports, *port;
phy_interface_t mode;
int err;
ports = of_get_child_by_name(priv->dev->of_node, "ports");
if (!ports)
ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports");
if (!ports)
return -EINVAL;
for_each_available_child_of_node(ports, port) {
err = of_property_read_u32(port, "reg", &reg);
if (err) {
of_node_put(port);
of_node_put(ports);
return err;
}
if (!dsa_is_user_port(priv->ds, reg))
continue;
of_get_phy_mode(port, &mode);
if (of_property_read_bool(port, "phy-handle") &&
mode != PHY_INTERFACE_MODE_INTERNAL)
external_mdio_mask |= BIT(reg);
else
internal_mdio_mask |= BIT(reg);
}
of_node_put(ports);
if (!external_mdio_mask && !internal_mdio_mask) {
dev_err(priv->dev, "no PHYs are defined.\n");
return -EINVAL;
}
/* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
* the MDIO_MASTER register also _disconnects_ the external MDC
* passthrough to the internal PHYs. It's not possible to use both
* configurations at the same time!
*
* Because this came up during the review process:
* If the external mdio-bus driver is capable magically disabling
* the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
* accessors for the time being, it would be possible to pull this
* off.
*/
if (!!external_mdio_mask && !!internal_mdio_mask) {
dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
return -EINVAL;
}
if (external_mdio_mask) {
/* Make sure to disable the internal mdio bus in cases
* a dt-overlay and driver reload changed the configuration
*/
return regmap_clear_bits(priv->regmap, QCA8K_MDIO_MASTER_CTRL,
QCA8K_MDIO_MASTER_EN);
}
return qca8k_mdio_register(priv);
}
static int
qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
{
u32 mask = 0;
int ret = 0;
/* SoC specific settings for ipq8064.
* If more device require this consider adding
* a dedicated binding.
*/
if (of_machine_is_compatible("qcom,ipq8064"))
mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
/* SoC specific settings for ipq8065 */
if (of_machine_is_compatible("qcom,ipq8065"))
mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
if (mask) {
ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
QCA8K_MAC_PWR_RGMII0_1_8V |
QCA8K_MAC_PWR_RGMII1_1_8V,
mask);
}
return ret;
}
static int qca8k_find_cpu_port(struct dsa_switch *ds)
{
struct qca8k_priv *priv = ds->priv;
/* Find the connected cpu port. Valid port are 0 or 6 */
if (dsa_is_cpu_port(ds, 0))
return 0;
dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6");
if (dsa_is_cpu_port(ds, 6))
return 6;
return -EINVAL;
}
static int
qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
{
const struct qca8k_match_data *data = priv->info;
struct device_node *node = priv->dev->of_node;
u32 val = 0;
int ret;
/* QCA8327 require to set to the correct mode.
* His bigger brother QCA8328 have the 172 pin layout.
* Should be applied by default but we set this just to make sure.
*/
if (priv->switch_id == QCA8K_ID_QCA8327) {
/* Set the correct package of 148 pin for QCA8327 */
if (data->reduced_package)
val |= QCA8327_PWS_PACKAGE148_EN;
ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
val);
if (ret)
return ret;
}
if (of_property_read_bool(node, "qca,ignore-power-on-sel"))
val |= QCA8K_PWS_POWER_ON_SEL;
if (of_property_read_bool(node, "qca,led-open-drain")) {
if (!(val & QCA8K_PWS_POWER_ON_SEL)) {
dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set.");
return -EINVAL;
}
val |= QCA8K_PWS_LED_OPEN_EN_CSR;
}
return qca8k_rmw(priv, QCA8K_REG_PWS,
QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL,
val);
}
static int
qca8k_parse_port_config(struct qca8k_priv *priv)
{
int port, cpu_port_index = -1, ret;
struct device_node *port_dn;
phy_interface_t mode;
struct dsa_port *dp;
u32 delay;
/* We have 2 CPU port. Check them */
for (port = 0; port < QCA8K_NUM_PORTS; port++) {
/* Skip every other port */
if (port != 0 && port != 6)
continue;
dp = dsa_to_port(priv->ds, port);
port_dn = dp->dn;
cpu_port_index++;
if (!of_device_is_available(port_dn))
continue;
ret = of_get_phy_mode(port_dn, &mode);
if (ret)
continue;
switch (mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_SGMII:
delay = 0;
if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
/* Switch regs accept value in ns, convert ps to ns */
delay = delay / 1000;
else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
mode == PHY_INTERFACE_MODE_RGMII_TXID)
delay = 1;
if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, delay)) {
dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
delay = 3;
}
priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay;
delay = 0;
if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay))
/* Switch regs accept value in ns, convert ps to ns */
delay = delay / 1000;
else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
mode == PHY_INTERFACE_MODE_RGMII_RXID)
delay = 2;
if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, delay)) {
dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
delay = 3;
}
priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay;
/* Skip sgmii parsing for rgmii* mode */
if (mode == PHY_INTERFACE_MODE_RGMII ||
mode == PHY_INTERFACE_MODE_RGMII_ID ||
mode == PHY_INTERFACE_MODE_RGMII_TXID ||
mode == PHY_INTERFACE_MODE_RGMII_RXID)
break;
if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
priv->ports_config.sgmii_tx_clk_falling_edge = true;
if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
priv->ports_config.sgmii_rx_clk_falling_edge = true;
if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
priv->ports_config.sgmii_enable_pll = true;
if (priv->switch_id == QCA8K_ID_QCA8327) {
dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
priv->ports_config.sgmii_enable_pll = false;
}
if (priv->switch_revision < 2)
dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more.");
}
break;
default:
continue;
}
}
return 0;
}
static void
qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index,
u32 reg)
{
u32 delay, val = 0;
int ret;
/* Delay can be declared in 3 different way.
* Mode to rgmii and internal-delay standard binding defined
* rgmii-id or rgmii-tx/rx phy mode set.
* The parse logic set a delay different than 0 only when one
* of the 3 different way is used. In all other case delay is
* not enabled. With ID or TX/RXID delay is enabled and set
* to the default and recommended value.
*/
if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) {
delay = priv->ports_config.rgmii_tx_delay[cpu_port_index];
val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
}
if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) {
delay = priv->ports_config.rgmii_rx_delay[cpu_port_index];
val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
}
/* Set RGMII delay based on the selected values */
ret = qca8k_rmw(priv, reg,
QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK |
QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK |
QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN,
val);
if (ret)
dev_err(priv->dev, "Failed to set internal delay for CPU port%d",
cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6);
}
static struct phylink_pcs *
qca8k_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
phy_interface_t interface)
{
struct qca8k_priv *priv = ds->priv;
struct phylink_pcs *pcs = NULL;
switch (interface) {
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_1000BASEX:
switch (port) {
case 0:
pcs = &priv->pcs_port_0.pcs;
break;
case 6:
pcs = &priv->pcs_port_6.pcs;
break;
}
break;
default:
break;
}
return pcs;
}
static void
qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct qca8k_priv *priv = ds->priv;
int cpu_port_index;
u32 reg;
switch (port) {
case 0: /* 1st CPU port */
if (state->interface != PHY_INTERFACE_MODE_RGMII &&
state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
state->interface != PHY_INTERFACE_MODE_SGMII)
return;
reg = QCA8K_REG_PORT0_PAD_CTRL;
cpu_port_index = QCA8K_CPU_PORT0;
break;
case 1:
case 2:
case 3:
case 4:
case 5:
/* Internal PHY, nothing to do */
return;
case 6: /* 2nd CPU port / external PHY */
if (state->interface != PHY_INTERFACE_MODE_RGMII &&
state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
state->interface != PHY_INTERFACE_MODE_SGMII &&
state->interface != PHY_INTERFACE_MODE_1000BASEX)
return;
reg = QCA8K_REG_PORT6_PAD_CTRL;
cpu_port_index = QCA8K_CPU_PORT6;
break;
default:
dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
return;
}
if (port != 6 && phylink_autoneg_inband(mode)) {
dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
__func__);
return;
}
switch (state->interface) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
/* Configure rgmii delay */
qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
/* QCA8337 requires to set rgmii rx delay for all ports.
* This is enabled through PORT5_PAD_CTRL for all ports,
* rather than individual port registers.
*/
if (priv->switch_id == QCA8K_ID_QCA8337)
qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
break;
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_1000BASEX:
/* Enable SGMII on the port */
qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
break;
default:
dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
phy_modes(state->interface), port);
return;
}
}
static void qca8k_phylink_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
switch (port) {
case 0: /* 1st CPU port */
phy_interface_set_rgmii(config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_SGMII,
config->supported_interfaces);
break;
case 1:
case 2:
case 3:
case 4:
case 5:
/* Internal PHY */
__set_bit(PHY_INTERFACE_MODE_GMII,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
break;
case 6: /* 2nd CPU port / external PHY */
phy_interface_set_rgmii(config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_SGMII,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_1000BASEX,
config->supported_interfaces);
break;
}
config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000FD;
config->legacy_pre_march2020 = false;
}
static void
qca8k_phylink_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
struct qca8k_priv *priv = ds->priv;
qca8k_port_set_status(priv, port, 0);
}
static void
qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface, struct phy_device *phydev,
int speed, int duplex, bool tx_pause, bool rx_pause)
{
struct qca8k_priv *priv = ds->priv;
u32 reg;
if (phylink_autoneg_inband(mode)) {
reg = QCA8K_PORT_STATUS_LINK_AUTO;
} else {
switch (speed) {
case SPEED_10:
reg = QCA8K_PORT_STATUS_SPEED_10;
break;
case SPEED_100:
reg = QCA8K_PORT_STATUS_SPEED_100;
break;
case SPEED_1000:
reg = QCA8K_PORT_STATUS_SPEED_1000;
break;
default:
reg = QCA8K_PORT_STATUS_LINK_AUTO;
break;
}
if (duplex == DUPLEX_FULL)
reg |= QCA8K_PORT_STATUS_DUPLEX;
if (rx_pause || dsa_is_cpu_port(ds, port))
reg |= QCA8K_PORT_STATUS_RXFLOW;
if (tx_pause || dsa_is_cpu_port(ds, port))
reg |= QCA8K_PORT_STATUS_TXFLOW;
}
reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg);
}
static struct qca8k_pcs *pcs_to_qca8k_pcs(struct phylink_pcs *pcs)
{
return container_of(pcs, struct qca8k_pcs, pcs);
}
static void qca8k_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv;
int port = pcs_to_qca8k_pcs(pcs)->port;
u32 reg;
int ret;
ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), &reg);
if (ret < 0) {
state->link = false;
return;
}
state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP);
state->an_complete = state->link;
state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL :
DUPLEX_HALF;
switch (reg & QCA8K_PORT_STATUS_SPEED) {
case QCA8K_PORT_STATUS_SPEED_10:
state->speed = SPEED_10;
break;
case QCA8K_PORT_STATUS_SPEED_100:
state->speed = SPEED_100;
break;
case QCA8K_PORT_STATUS_SPEED_1000:
state->speed = SPEED_1000;
break;
default:
state->speed = SPEED_UNKNOWN;
break;
}
if (reg & QCA8K_PORT_STATUS_RXFLOW)
state->pause |= MLO_PAUSE_RX;
if (reg & QCA8K_PORT_STATUS_TXFLOW)
state->pause |= MLO_PAUSE_TX;
}
static int qca8k_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface,
const unsigned long *advertising,
bool permit_pause_to_mac)
{
struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv;
int cpu_port_index, ret, port;
u32 reg, val;
port = pcs_to_qca8k_pcs(pcs)->port;
switch (port) {
case 0:
reg = QCA8K_REG_PORT0_PAD_CTRL;
cpu_port_index = QCA8K_CPU_PORT0;
break;
case 6:
reg = QCA8K_REG_PORT6_PAD_CTRL;
cpu_port_index = QCA8K_CPU_PORT6;
break;
default:
WARN_ON(1);
return -EINVAL;
}
/* Enable/disable SerDes auto-negotiation as necessary */
ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
if (ret)
return ret;
if (phylink_autoneg_inband(mode))
val &= ~QCA8K_PWS_SERDES_AEN_DIS;
else
val |= QCA8K_PWS_SERDES_AEN_DIS;
qca8k_write(priv, QCA8K_REG_PWS, val);
/* Configure the SGMII parameters */
ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
if (ret)
return ret;
val |= QCA8K_SGMII_EN_SD;
if (priv->ports_config.sgmii_enable_pll)
val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
QCA8K_SGMII_EN_TX;
if (dsa_is_cpu_port(priv->ds, port)) {
/* CPU port, we're talking to the CPU MAC, be a PHY */
val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
val |= QCA8K_SGMII_MODE_CTRL_PHY;
} else if (interface == PHY_INTERFACE_MODE_SGMII) {
val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
val |= QCA8K_SGMII_MODE_CTRL_MAC;
} else if (interface == PHY_INTERFACE_MODE_1000BASEX) {
val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
val |= QCA8K_SGMII_MODE_CTRL_BASEX;
}
qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
/* From original code is reported port instability as SGMII also
* require delay set. Apply advised values here or take them from DT.
*/
if (interface == PHY_INTERFACE_MODE_SGMII)
qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
/* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
* falling edge is set writing in the PORT0 PAD reg
*/
if (priv->switch_id == QCA8K_ID_QCA8327 ||
priv->switch_id == QCA8K_ID_QCA8337)
reg = QCA8K_REG_PORT0_PAD_CTRL;
val = 0;
/* SGMII Clock phase configuration */
if (priv->ports_config.sgmii_rx_clk_falling_edge)
val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
if (priv->ports_config.sgmii_tx_clk_falling_edge)
val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
if (val)
ret = qca8k_rmw(priv, reg,
QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
val);
return 0;
}
static void qca8k_pcs_an_restart(struct phylink_pcs *pcs)
{
}
static const struct phylink_pcs_ops qca8k_pcs_ops = {
.pcs_get_state = qca8k_pcs_get_state,
.pcs_config = qca8k_pcs_config,
.pcs_an_restart = qca8k_pcs_an_restart,
};
static void qca8k_setup_pcs(struct qca8k_priv *priv, struct qca8k_pcs *qpcs,
int port)
{
qpcs->pcs.ops = &qca8k_pcs_ops;
/* We don't have interrupts for link changes, so we need to poll */
qpcs->pcs.poll = true;
qpcs->priv = priv;
qpcs->port = port;
}
static void qca8k_mib_autocast_handler(struct dsa_switch *ds, struct sk_buff *skb)
{
struct qca8k_mib_eth_data *mib_eth_data;
struct qca8k_priv *priv = ds->priv;
const struct qca8k_mib_desc *mib;
struct mib_ethhdr *mib_ethhdr;
__le32 *data2;
u8 port;
int i;
mib_ethhdr = (struct mib_ethhdr *)skb_mac_header(skb);
mib_eth_data = &priv->mib_eth_data;
/* The switch autocast every port. Ignore other packet and
* parse only the requested one.
*/
port = FIELD_GET(QCA_HDR_RECV_SOURCE_PORT, ntohs(mib_ethhdr->hdr));
if (port != mib_eth_data->req_port)
goto exit;
data2 = (__le32 *)skb->data;
for (i = 0; i < priv->info->mib_count; i++) {
mib = &ar8327_mib[i];
/* First 3 mib are present in the skb head */
if (i < 3) {
mib_eth_data->data[i] = get_unaligned_le32(mib_ethhdr->data + i);
continue;
}
/* Some mib are 64 bit wide */
if (mib->size == 2)
mib_eth_data->data[i] = get_unaligned_le64((__le64 *)data2);
else
mib_eth_data->data[i] = get_unaligned_le32(data2);
data2 += mib->size;
}
exit:
/* Complete on receiving all the mib packet */
if (refcount_dec_and_test(&mib_eth_data->port_parsed))
complete(&mib_eth_data->rw_done);
}
static int
qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data)
{
struct dsa_port *dp = dsa_to_port(ds, port);
struct qca8k_mib_eth_data *mib_eth_data;
struct qca8k_priv *priv = ds->priv;
int ret;
mib_eth_data = &priv->mib_eth_data;
mutex_lock(&mib_eth_data->mutex);
reinit_completion(&mib_eth_data->rw_done);
mib_eth_data->req_port = dp->index;
mib_eth_data->data = data;
refcount_set(&mib_eth_data->port_parsed, QCA8K_NUM_PORTS);
mutex_lock(&priv->reg_mutex);
/* Send mib autocast request */
ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB,
QCA8K_MIB_FUNC | QCA8K_MIB_BUSY,
FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_CAST) |
QCA8K_MIB_BUSY);
mutex_unlock(&priv->reg_mutex);
if (ret)
goto exit;
ret = wait_for_completion_timeout(&mib_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT);
exit:
mutex_unlock(&mib_eth_data->mutex);
return ret;
}
static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port)
{
struct qca8k_priv *priv = ds->priv;
/* Communicate to the phy internal driver the switch revision.
* Based on the switch revision different values needs to be
* set to the dbg and mmd reg on the phy.
* The first 2 bit are used to communicate the switch revision
* to the phy driver.
*/
if (port > 0 && port < 6)
return priv->switch_revision;
return 0;
}
static enum dsa_tag_protocol
qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
enum dsa_tag_protocol mp)
{
return DSA_TAG_PROTO_QCA;
}
static void
qca8k_master_change(struct dsa_switch *ds, const struct net_device *master,
bool operational)
{
struct dsa_port *dp = master->dsa_ptr;
struct qca8k_priv *priv = ds->priv;
/* Ethernet MIB/MDIO is only supported for CPU port 0 */
if (dp->index != 0)
return;
mutex_lock(&priv->mgmt_eth_data.mutex);
mutex_lock(&priv->mib_eth_data.mutex);
priv->mgmt_master = operational ? (struct net_device *)master : NULL;
mutex_unlock(&priv->mib_eth_data.mutex);
mutex_unlock(&priv->mgmt_eth_data.mutex);
}
static int qca8k_connect_tag_protocol(struct dsa_switch *ds,
enum dsa_tag_protocol proto)
{
struct qca_tagger_data *tagger_data;
switch (proto) {
case DSA_TAG_PROTO_QCA:
tagger_data = ds->tagger_data;
tagger_data->rw_reg_ack_handler = qca8k_rw_reg_ack_handler;
tagger_data->mib_autocast_handler = qca8k_mib_autocast_handler;
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static int
qca8k_setup(struct dsa_switch *ds)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
int cpu_port, ret, i;
u32 mask;
cpu_port = qca8k_find_cpu_port(ds);
if (cpu_port < 0) {
dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
return cpu_port;
}
/* Parse CPU port config to be later used in phy_link mac_config */
ret = qca8k_parse_port_config(priv);
if (ret)
return ret;
ret = qca8k_setup_mdio_bus(priv);
if (ret)
return ret;
ret = qca8k_setup_of_pws_reg(priv);
if (ret)
return ret;
ret = qca8k_setup_mac_pwr_sel(priv);
if (ret)
return ret;
qca8k_setup_pcs(priv, &priv->pcs_port_0, 0);
qca8k_setup_pcs(priv, &priv->pcs_port_6, 6);
/* Make sure MAC06 is disabled */
ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL,
QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN);
if (ret) {
dev_err(priv->dev, "failed disabling MAC06 exchange");
return ret;
}
/* Enable CPU Port */
ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
if (ret) {
dev_err(priv->dev, "failed enabling CPU port");
return ret;
}
/* Enable MIB counters */
ret = qca8k_mib_init(priv);
if (ret)
dev_warn(priv->dev, "mib init failed");
/* Initial setup of all ports */
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
/* Disable forwarding by default on all ports */
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER, 0);
if (ret)
return ret;
/* Enable QCA header mode on all cpu ports */
if (dsa_is_cpu_port(ds, i)) {
ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
if (ret) {
dev_err(priv->dev, "failed enabling QCA header mode");
return ret;
}
}
/* Disable MAC by default on all user ports */
if (dsa_is_user_port(ds, i))
qca8k_port_set_status(priv, i, 0);
}
/* Forward all unknown frames to CPU port for Linux processing
* Notice that in multi-cpu config only one port should be set
* for igmp, unknown, multicast and broadcast packet
*/
ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) |
FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) |
FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) |
FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port)));
if (ret)
return ret;
/* Setup connection between CPU port & user ports
* Configure specific switch configuration for ports
*/
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
/* CPU port gets connected to all user ports of the switch */
if (dsa_is_cpu_port(ds, i)) {
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
if (ret)
return ret;
}
/* Individual user ports get connected to CPU port only */
if (dsa_is_user_port(ds, i)) {
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER,
BIT(cpu_port));
if (ret)
return ret;
/* Enable ARP Auto-learning by default */
ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_LEARN);
if (ret)
return ret;
/* For port based vlans to work we need to set the
* default egress vid
*/
ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
QCA8K_EGREES_VLAN_PORT_MASK(i),
QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF));
if (ret)
return ret;
ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
if (ret)
return ret;
}
/* The port 5 of the qca8337 have some problem in flood condition. The
* original legacy driver had some specific buffer and priority settings
* for the different port suggested by the QCA switch team. Add this
* missing settings to improve switch stability under load condition.
* This problem is limited to qca8337 and other qca8k switch are not affected.
*/
if (priv->switch_id == QCA8K_ID_QCA8337) {
switch (i) {
/* The 2 CPU port and port 5 requires some different
* priority than any other ports.
*/
case 0:
case 5:
case 6:
mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
break;
default:
mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
}
qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
QCA8K_PORT_HOL_CTRL1_WRED_EN;
qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
QCA8K_PORT_HOL_CTRL1_WRED_EN,
mask);
}
}
/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
if (priv->switch_id == QCA8K_ID_QCA8327) {
mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496);
qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH,
QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK |
QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK,
mask);
}
/* Setup our port MTUs to match power on defaults */
ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
if (ret)
dev_warn(priv->dev, "failed setting MTU settings");
/* Flush the FDB table */
qca8k_fdb_flush(priv);
/* Set min a max ageing value supported */
ds->ageing_time_min = 7000;
ds->ageing_time_max = 458745000;
/* Set max number of LAGs supported */
ds->num_lag_ids = QCA8K_NUM_LAGS;
return 0;
}
static const struct dsa_switch_ops qca8k_switch_ops = {
.get_tag_protocol = qca8k_get_tag_protocol,
.setup = qca8k_setup,
.get_strings = qca8k_get_strings,
.get_ethtool_stats = qca8k_get_ethtool_stats,
.get_sset_count = qca8k_get_sset_count,
.set_ageing_time = qca8k_set_ageing_time,
.get_mac_eee = qca8k_get_mac_eee,
.set_mac_eee = qca8k_set_mac_eee,
.port_enable = qca8k_port_enable,
.port_disable = qca8k_port_disable,
.port_change_mtu = qca8k_port_change_mtu,
.port_max_mtu = qca8k_port_max_mtu,
.port_stp_state_set = qca8k_port_stp_state_set,
.port_bridge_join = qca8k_port_bridge_join,
.port_bridge_leave = qca8k_port_bridge_leave,
.port_fast_age = qca8k_port_fast_age,
.port_fdb_add = qca8k_port_fdb_add,
.port_fdb_del = qca8k_port_fdb_del,
.port_fdb_dump = qca8k_port_fdb_dump,
.port_mdb_add = qca8k_port_mdb_add,
.port_mdb_del = qca8k_port_mdb_del,
.port_mirror_add = qca8k_port_mirror_add,
.port_mirror_del = qca8k_port_mirror_del,
.port_vlan_filtering = qca8k_port_vlan_filtering,
.port_vlan_add = qca8k_port_vlan_add,
.port_vlan_del = qca8k_port_vlan_del,
.phylink_get_caps = qca8k_phylink_get_caps,
.phylink_mac_select_pcs = qca8k_phylink_mac_select_pcs,
.phylink_mac_config = qca8k_phylink_mac_config,
.phylink_mac_link_down = qca8k_phylink_mac_link_down,
.phylink_mac_link_up = qca8k_phylink_mac_link_up,
.get_phy_flags = qca8k_get_phy_flags,
.port_lag_join = qca8k_port_lag_join,
.port_lag_leave = qca8k_port_lag_leave,
.master_state_change = qca8k_master_change,
.connect_tag_protocol = qca8k_connect_tag_protocol,
};
static int
qca8k_sw_probe(struct mdio_device *mdiodev)
{
struct qca8k_priv *priv;
int ret;
/* allocate the private data struct so that we can probe the switches
* ID register
*/
priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->bus = mdiodev->bus;
priv->dev = &mdiodev->dev;
priv->info = of_device_get_match_data(priv->dev);
priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
GPIOD_ASIS);
if (IS_ERR(priv->reset_gpio))
return PTR_ERR(priv->reset_gpio);
if (priv->reset_gpio) {
gpiod_set_value_cansleep(priv->reset_gpio, 1);
/* The active low duration must be greater than 10 ms
* and checkpatch.pl wants 20 ms.
*/
msleep(20);
gpiod_set_value_cansleep(priv->reset_gpio, 0);
}
/* Start by setting up the register mapping */
priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv,
&qca8k_regmap_config);
if (IS_ERR(priv->regmap)) {
dev_err(priv->dev, "regmap initialization failed");
return PTR_ERR(priv->regmap);
}
priv->mdio_cache.page = 0xffff;
/* Check the detected switch id */
ret = qca8k_read_switch_id(priv);
if (ret)
return ret;
priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
if (!priv->ds)
return -ENOMEM;
mutex_init(&priv->mgmt_eth_data.mutex);
init_completion(&priv->mgmt_eth_data.rw_done);
mutex_init(&priv->mib_eth_data.mutex);
init_completion(&priv->mib_eth_data.rw_done);
priv->ds->dev = &mdiodev->dev;
priv->ds->num_ports = QCA8K_NUM_PORTS;
priv->ds->priv = priv;
priv->ds->ops = &qca8k_switch_ops;
mutex_init(&priv->reg_mutex);
dev_set_drvdata(&mdiodev->dev, priv);
return dsa_register_switch(priv->ds);
}
static void
qca8k_sw_remove(struct mdio_device *mdiodev)
{
struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
int i;
if (!priv)
return;
for (i = 0; i < QCA8K_NUM_PORTS; i++)
qca8k_port_set_status(priv, i, 0);
dsa_unregister_switch(priv->ds);
}
static void qca8k_sw_shutdown(struct mdio_device *mdiodev)
{
struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
if (!priv)
return;
dsa_switch_shutdown(priv->ds);
dev_set_drvdata(&mdiodev->dev, NULL);
}
#ifdef CONFIG_PM_SLEEP
static void
qca8k_set_pm(struct qca8k_priv *priv, int enable)
{
int port;
for (port = 0; port < QCA8K_NUM_PORTS; port++) {
/* Do not enable on resume if the port was
* disabled before.
*/
if (!(priv->port_enabled_map & BIT(port)))
continue;
qca8k_port_set_status(priv, port, enable);
}
}
static int qca8k_suspend(struct device *dev)
{
struct qca8k_priv *priv = dev_get_drvdata(dev);
qca8k_set_pm(priv, 0);
return dsa_switch_suspend(priv->ds);
}
static int qca8k_resume(struct device *dev)
{
struct qca8k_priv *priv = dev_get_drvdata(dev);
qca8k_set_pm(priv, 1);
return dsa_switch_resume(priv->ds);
}
#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
qca8k_suspend, qca8k_resume);
static const struct qca8k_info_ops qca8xxx_ops = {
.autocast_mib = qca8k_get_ethtool_stats_eth,
.read_eth = qca8k_read_eth,
.write_eth = qca8k_write_eth,
};
static const struct qca8k_match_data qca8327 = {
.id = QCA8K_ID_QCA8327,
.reduced_package = true,
.mib_count = QCA8K_QCA832X_MIB_COUNT,
.ops = &qca8xxx_ops,
};
static const struct qca8k_match_data qca8328 = {
.id = QCA8K_ID_QCA8327,
.mib_count = QCA8K_QCA832X_MIB_COUNT,
.ops = &qca8xxx_ops,
};
static const struct qca8k_match_data qca833x = {
.id = QCA8K_ID_QCA8337,
.mib_count = QCA8K_QCA833X_MIB_COUNT,
.ops = &qca8xxx_ops,
};
static const struct of_device_id qca8k_of_match[] = {
{ .compatible = "qca,qca8327", .data = &qca8327 },
{ .compatible = "qca,qca8328", .data = &qca8328 },
{ .compatible = "qca,qca8334", .data = &qca833x },
{ .compatible = "qca,qca8337", .data = &qca833x },
{ /* sentinel */ },
};
static struct mdio_driver qca8kmdio_driver = {
.probe = qca8k_sw_probe,
.remove = qca8k_sw_remove,
.shutdown = qca8k_sw_shutdown,
.mdiodrv.driver = {
.name = "qca8k",
.of_match_table = qca8k_of_match,
.pm = &qca8k_pm_ops,
},
};
mdio_module_driver(qca8kmdio_driver);
MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@phrozen.org>");
MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:qca8k");