linuxdebug/drivers/scsi/arm/acornscsi.h

351 lines
9.3 KiB
C
Raw Permalink Normal View History

2024-07-16 15:50:57 +02:00
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/drivers/acorn/scsi/acornscsi.h
*
* Copyright (C) 1997 Russell King
*
* Acorn SCSI driver
*/
#ifndef ACORNSCSI_H
#define ACORNSCSI_H
/* SBIC registers */
#define SBIC_OWNID 0
#define OWNID_FS1 (1<<7)
#define OWNID_FS2 (1<<6)
#define OWNID_EHP (1<<4)
#define OWNID_EAF (1<<3)
#define SBIC_CTRL 1
#define CTRL_DMAMODE (1<<7)
#define CTRL_DMADBAMODE (1<<6)
#define CTRL_DMABURST (1<<5)
#define CTRL_DMAPOLLED 0
#define CTRL_HHP (1<<4)
#define CTRL_EDI (1<<3)
#define CTRL_IDI (1<<2)
#define CTRL_HA (1<<1)
#define CTRL_HSP (1<<0)
#define SBIC_TIMEOUT 2
#define SBIC_TOTSECTS 3
#define SBIC_TOTHEADS 4
#define SBIC_TOTCYLH 5
#define SBIC_TOTCYLL 6
#define SBIC_LOGADDRH 7
#define SBIC_LOGADDRM2 8
#define SBIC_LOGADDRM1 9
#define SBIC_LOGADDRL 10
#define SBIC_SECTORNUM 11
#define SBIC_HEADNUM 12
#define SBIC_CYLH 13
#define SBIC_CYLL 14
#define SBIC_TARGETLUN 15
#define TARGETLUN_TLV (1<<7)
#define TARGETLUN_DOK (1<<6)
#define SBIC_CMNDPHASE 16
#define SBIC_SYNCHTRANSFER 17
#define SYNCHTRANSFER_OF0 0x00
#define SYNCHTRANSFER_OF1 0x01
#define SYNCHTRANSFER_OF2 0x02
#define SYNCHTRANSFER_OF3 0x03
#define SYNCHTRANSFER_OF4 0x04
#define SYNCHTRANSFER_OF5 0x05
#define SYNCHTRANSFER_OF6 0x06
#define SYNCHTRANSFER_OF7 0x07
#define SYNCHTRANSFER_OF8 0x08
#define SYNCHTRANSFER_OF9 0x09
#define SYNCHTRANSFER_OF10 0x0A
#define SYNCHTRANSFER_OF11 0x0B
#define SYNCHTRANSFER_OF12 0x0C
#define SYNCHTRANSFER_8DBA 0x00
#define SYNCHTRANSFER_2DBA 0x20
#define SYNCHTRANSFER_3DBA 0x30
#define SYNCHTRANSFER_4DBA 0x40
#define SYNCHTRANSFER_5DBA 0x50
#define SYNCHTRANSFER_6DBA 0x60
#define SYNCHTRANSFER_7DBA 0x70
#define SBIC_TRANSCNTH 18
#define SBIC_TRANSCNTM 19
#define SBIC_TRANSCNTL 20
#define SBIC_DESTID 21
#define DESTID_SCC (1<<7)
#define DESTID_DPD (1<<6)
#define SBIC_SOURCEID 22
#define SOURCEID_ER (1<<7)
#define SOURCEID_ES (1<<6)
#define SOURCEID_DSP (1<<5)
#define SOURCEID_SIV (1<<4)
#define SBIC_SSR 23
#define SBIC_CMND 24
#define CMND_RESET 0x00
#define CMND_ABORT 0x01
#define CMND_ASSERTATN 0x02
#define CMND_NEGATEACK 0x03
#define CMND_DISCONNECT 0x04
#define CMND_RESELECT 0x05
#define CMND_SELWITHATN 0x06
#define CMND_SELECT 0x07
#define CMND_SELECTATNTRANSFER 0x08
#define CMND_SELECTTRANSFER 0x09
#define CMND_RESELECTRXDATA 0x0A
#define CMND_RESELECTTXDATA 0x0B
#define CMND_WAITFORSELRECV 0x0C
#define CMND_SENDSTATCMD 0x0D
#define CMND_SENDDISCONNECT 0x0E
#define CMND_SETIDI 0x0F
#define CMND_RECEIVECMD 0x10
#define CMND_RECEIVEDTA 0x11
#define CMND_RECEIVEMSG 0x12
#define CMND_RECEIVEUSP 0x13
#define CMND_SENDCMD 0x14
#define CMND_SENDDATA 0x15
#define CMND_SENDMSG 0x16
#define CMND_SENDUSP 0x17
#define CMND_TRANSLATEADDR 0x18
#define CMND_XFERINFO 0x20
#define CMND_SBT (1<<7)
#define SBIC_DATA 25
#define SBIC_ASR 26
#define ASR_INT (1<<7)
#define ASR_LCI (1<<6)
#define ASR_BSY (1<<5)
#define ASR_CIP (1<<4)
#define ASR_PE (1<<1)
#define ASR_DBR (1<<0)
/* DMAC registers */
#define DMAC_INIT 0x00
#define INIT_8BIT (1)
#define DMAC_CHANNEL 0x80
#define CHANNEL_0 0x00
#define CHANNEL_1 0x01
#define CHANNEL_2 0x02
#define CHANNEL_3 0x03
#define DMAC_TXCNTLO 0x01
#define DMAC_TXCNTHI 0x81
#define DMAC_TXADRLO 0x02
#define DMAC_TXADRMD 0x82
#define DMAC_TXADRHI 0x03
#define DMAC_DEVCON0 0x04
#define DEVCON0_AKL (1<<7)
#define DEVCON0_RQL (1<<6)
#define DEVCON0_EXW (1<<5)
#define DEVCON0_ROT (1<<4)
#define DEVCON0_CMP (1<<3)
#define DEVCON0_DDMA (1<<2)
#define DEVCON0_AHLD (1<<1)
#define DEVCON0_MTM (1<<0)
#define DMAC_DEVCON1 0x84
#define DEVCON1_WEV (1<<1)
#define DEVCON1_BHLD (1<<0)
#define DMAC_MODECON 0x05
#define MODECON_WOED 0x01
#define MODECON_VERIFY 0x00
#define MODECON_READ 0x04
#define MODECON_WRITE 0x08
#define MODECON_AUTOINIT 0x10
#define MODECON_ADDRDIR 0x20
#define MODECON_DEMAND 0x00
#define MODECON_SINGLE 0x40
#define MODECON_BLOCK 0x80
#define MODECON_CASCADE 0xC0
#define DMAC_STATUS 0x85
#define STATUS_TC0 (1<<0)
#define STATUS_RQ0 (1<<4)
#define DMAC_TEMPLO 0x06
#define DMAC_TEMPHI 0x86
#define DMAC_REQREG 0x07
#define DMAC_MASKREG 0x87
#define MASKREG_M0 0x01
#define MASKREG_M1 0x02
#define MASKREG_M2 0x04
#define MASKREG_M3 0x08
/* miscellaneous internal variables */
#define MASK_ON (MASKREG_M3|MASKREG_M2|MASKREG_M1|MASKREG_M0)
#define MASK_OFF (MASKREG_M3|MASKREG_M2|MASKREG_M1)
/*
* SCSI driver phases
*/
typedef enum {
PHASE_IDLE, /* we're not planning on doing anything */
PHASE_CONNECTING, /* connecting to a target */
PHASE_CONNECTED, /* connected to a target */
PHASE_MSGOUT, /* message out to device */
PHASE_RECONNECTED, /* reconnected */
PHASE_COMMANDPAUSED, /* command partly sent */
PHASE_COMMAND, /* command all sent */
PHASE_DATAOUT, /* data out to device */
PHASE_DATAIN, /* data in from device */
PHASE_STATUSIN, /* status in from device */
PHASE_MSGIN, /* message in from device */
PHASE_DONE, /* finished */
PHASE_ABORTED, /* aborted */
PHASE_DISCONNECT, /* disconnecting */
} phase_t;
/*
* After interrupt, what to do now
*/
typedef enum {
INTR_IDLE, /* not expecting another IRQ */
INTR_NEXT_COMMAND, /* start next command */
INTR_PROCESSING, /* interrupt routine still processing */
} intr_ret_t;
/*
* DMA direction
*/
typedef enum {
DMA_OUT, /* DMA from memory to chip */
DMA_IN /* DMA from chip to memory */
} dmadir_t;
/*
* Synchronous transfer state
*/
typedef enum { /* Synchronous transfer state */
SYNC_ASYNCHRONOUS, /* don't negotiate synchronous transfers*/
SYNC_NEGOCIATE, /* start negotiation */
SYNC_SENT_REQUEST, /* sent SDTR message */
SYNC_COMPLETED, /* received SDTR reply */
} syncxfer_t;
/*
* Command type
*/
typedef enum { /* command type */
CMD_READ, /* READ_6, READ_10, READ_12 */
CMD_WRITE, /* WRITE_6, WRITE_10, WRITE_12 */
CMD_MISC, /* Others */
} cmdtype_t;
/*
* Data phase direction
*/
typedef enum { /* Data direction */
DATADIR_IN, /* Data in phase expected */
DATADIR_OUT /* Data out phase expected */
} datadir_t;
#include "queue.h"
#include "msgqueue.h"
#define STATUS_BUFFER_SIZE 32
/*
* This is used to dump the previous states of the SBIC
*/
struct status_entry {
unsigned long when;
unsigned char ssr;
unsigned char ph;
unsigned char irq;
unsigned char unused;
};
#define ADD_STATUS(_q,_ssr,_ph,_irq) \
({ \
host->status[(_q)][host->status_ptr[(_q)]].when = jiffies; \
host->status[(_q)][host->status_ptr[(_q)]].ssr = (_ssr); \
host->status[(_q)][host->status_ptr[(_q)]].ph = (_ph); \
host->status[(_q)][host->status_ptr[(_q)]].irq = (_irq); \
host->status_ptr[(_q)] = (host->status_ptr[(_q)] + 1) & (STATUS_BUFFER_SIZE - 1); \
})
/*
* AcornSCSI host specific data
*/
typedef struct acornscsi_hostdata {
/* miscellaneous */
struct Scsi_Host *host; /* host */
struct scsi_cmnd *SCpnt; /* currently processing command */
struct scsi_cmnd *origSCpnt; /* original connecting command */
void __iomem *base; /* memc base address */
void __iomem *fast; /* fast ioc base address */
/* driver information */
struct {
unsigned int irq; /* interrupt */
phase_t phase; /* current phase */
struct {
unsigned char target; /* reconnected target */
unsigned char lun; /* reconnected lun */
unsigned char tag; /* reconnected tag */
} reconnected;
struct scsi_pointer SCp; /* current commands data pointer */
MsgQueue_t msgs;
unsigned short last_message; /* last message to be sent */
unsigned char disconnectable:1; /* this command can be disconnected */
} scsi;
/* statistics information */
struct {
unsigned int queues;
unsigned int removes;
unsigned int fins;
unsigned int reads;
unsigned int writes;
unsigned int miscs;
unsigned int disconnects;
unsigned int aborts;
unsigned int resets;
} stats;
/* queue handling */
struct {
Queue_t issue; /* issue queue */
Queue_t disconnected; /* disconnected command queue */
} queues;
/* per-device info */
struct {
unsigned char sync_xfer; /* synchronous transfer (SBIC value) */
syncxfer_t sync_state; /* sync xfer negotiation state */
unsigned char disconnect_ok:1; /* device can disconnect */
} device[8];
unsigned long busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy */
/* DMA info */
struct {
unsigned int free_addr; /* next free address */
unsigned int start_addr; /* start address of current transfer */
dmadir_t direction; /* dma direction */
unsigned int transferred; /* number of bytes transferred */
unsigned int xfer_start; /* scheduled DMA transfer start */
unsigned int xfer_length; /* scheduled DMA transfer length */
char *xfer_ptr; /* pointer to area */
unsigned char xfer_required:1; /* set if we need to transfer something */
unsigned char xfer_setup:1; /* set if DMA is setup */
unsigned char xfer_done:1; /* set if DMA reached end of BH list */
} dma;
/* card info */
struct {
unsigned char page_reg; /* current setting of page reg */
} card;
unsigned char status_ptr[9];
struct status_entry status[9][STATUS_BUFFER_SIZE];
} AS_Host;
#endif /* ACORNSCSI_H */