linuxdebug/include/uapi/linux/can/error.h

144 lines
6.9 KiB
C
Raw Permalink Normal View History

2024-07-16 15:50:57 +02:00
/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
/*
* linux/can/error.h
*
* Definitions of the CAN error messages to be filtered and passed to the user.
*
* Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
* Copyright (c) 2002-2007 Volkswagen Group Electronic Research
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Volkswagen nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Alternatively, provided that this notice is retained in full, this
* software may be distributed under the terms of the GNU General
* Public License ("GPL") version 2, in which case the provisions of the
* GPL apply INSTEAD OF those given above.
*
* The provided data structures and external interfaces from this code
* are not restricted to be used by modules with a GPL compatible license.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*/
#ifndef _UAPI_CAN_ERROR_H
#define _UAPI_CAN_ERROR_H
#define CAN_ERR_DLC 8 /* dlc for error message frames */
/* error class (mask) in can_id */
#define CAN_ERR_TX_TIMEOUT 0x00000001U /* TX timeout (by netdevice driver) */
#define CAN_ERR_LOSTARB 0x00000002U /* lost arbitration / data[0] */
#define CAN_ERR_CRTL 0x00000004U /* controller problems / data[1] */
#define CAN_ERR_PROT 0x00000008U /* protocol violations / data[2..3] */
#define CAN_ERR_TRX 0x00000010U /* transceiver status / data[4] */
#define CAN_ERR_ACK 0x00000020U /* received no ACK on transmission */
#define CAN_ERR_BUSOFF 0x00000040U /* bus off */
#define CAN_ERR_BUSERROR 0x00000080U /* bus error (may flood!) */
#define CAN_ERR_RESTARTED 0x00000100U /* controller restarted */
#define CAN_ERR_CNT 0x00000200U /* TX error counter / data[6] */
/* RX error counter / data[7] */
/* arbitration lost in bit ... / data[0] */
#define CAN_ERR_LOSTARB_UNSPEC 0x00 /* unspecified */
/* else bit number in bitstream */
/* error status of CAN-controller / data[1] */
#define CAN_ERR_CRTL_UNSPEC 0x00 /* unspecified */
#define CAN_ERR_CRTL_RX_OVERFLOW 0x01 /* RX buffer overflow */
#define CAN_ERR_CRTL_TX_OVERFLOW 0x02 /* TX buffer overflow */
#define CAN_ERR_CRTL_RX_WARNING 0x04 /* reached warning level for RX errors */
#define CAN_ERR_CRTL_TX_WARNING 0x08 /* reached warning level for TX errors */
#define CAN_ERR_CRTL_RX_PASSIVE 0x10 /* reached error passive status RX */
#define CAN_ERR_CRTL_TX_PASSIVE 0x20 /* reached error passive status TX */
/* (at least one error counter exceeds */
/* the protocol-defined level of 127) */
#define CAN_ERR_CRTL_ACTIVE 0x40 /* recovered to error active state */
/* error in CAN protocol (type) / data[2] */
#define CAN_ERR_PROT_UNSPEC 0x00 /* unspecified */
#define CAN_ERR_PROT_BIT 0x01 /* single bit error */
#define CAN_ERR_PROT_FORM 0x02 /* frame format error */
#define CAN_ERR_PROT_STUFF 0x04 /* bit stuffing error */
#define CAN_ERR_PROT_BIT0 0x08 /* unable to send dominant bit */
#define CAN_ERR_PROT_BIT1 0x10 /* unable to send recessive bit */
#define CAN_ERR_PROT_OVERLOAD 0x20 /* bus overload */
#define CAN_ERR_PROT_ACTIVE 0x40 /* active error announcement */
#define CAN_ERR_PROT_TX 0x80 /* error occurred on transmission */
/* error in CAN protocol (location) / data[3] */
#define CAN_ERR_PROT_LOC_UNSPEC 0x00 /* unspecified */
#define CAN_ERR_PROT_LOC_SOF 0x03 /* start of frame */
#define CAN_ERR_PROT_LOC_ID28_21 0x02 /* ID bits 28 - 21 (SFF: 10 - 3) */
#define CAN_ERR_PROT_LOC_ID20_18 0x06 /* ID bits 20 - 18 (SFF: 2 - 0 )*/
#define CAN_ERR_PROT_LOC_SRTR 0x04 /* substitute RTR (SFF: RTR) */
#define CAN_ERR_PROT_LOC_IDE 0x05 /* identifier extension */
#define CAN_ERR_PROT_LOC_ID17_13 0x07 /* ID bits 17-13 */
#define CAN_ERR_PROT_LOC_ID12_05 0x0F /* ID bits 12-5 */
#define CAN_ERR_PROT_LOC_ID04_00 0x0E /* ID bits 4-0 */
#define CAN_ERR_PROT_LOC_RTR 0x0C /* RTR */
#define CAN_ERR_PROT_LOC_RES1 0x0D /* reserved bit 1 */
#define CAN_ERR_PROT_LOC_RES0 0x09 /* reserved bit 0 */
#define CAN_ERR_PROT_LOC_DLC 0x0B /* data length code */
#define CAN_ERR_PROT_LOC_DATA 0x0A /* data section */
#define CAN_ERR_PROT_LOC_CRC_SEQ 0x08 /* CRC sequence */
#define CAN_ERR_PROT_LOC_CRC_DEL 0x18 /* CRC delimiter */
#define CAN_ERR_PROT_LOC_ACK 0x19 /* ACK slot */
#define CAN_ERR_PROT_LOC_ACK_DEL 0x1B /* ACK delimiter */
#define CAN_ERR_PROT_LOC_EOF 0x1A /* end of frame */
#define CAN_ERR_PROT_LOC_INTERM 0x12 /* intermission */
/* error status of CAN-transceiver / data[4] */
/* CANH CANL */
#define CAN_ERR_TRX_UNSPEC 0x00 /* 0000 0000 */
#define CAN_ERR_TRX_CANH_NO_WIRE 0x04 /* 0000 0100 */
#define CAN_ERR_TRX_CANH_SHORT_TO_BAT 0x05 /* 0000 0101 */
#define CAN_ERR_TRX_CANH_SHORT_TO_VCC 0x06 /* 0000 0110 */
#define CAN_ERR_TRX_CANH_SHORT_TO_GND 0x07 /* 0000 0111 */
#define CAN_ERR_TRX_CANL_NO_WIRE 0x40 /* 0100 0000 */
#define CAN_ERR_TRX_CANL_SHORT_TO_BAT 0x50 /* 0101 0000 */
#define CAN_ERR_TRX_CANL_SHORT_TO_VCC 0x60 /* 0110 0000 */
#define CAN_ERR_TRX_CANL_SHORT_TO_GND 0x70 /* 0111 0000 */
#define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */
/* data[5] is reserved (do not use) */
/* TX error counter / data[6] */
/* RX error counter / data[7] */
/* CAN state thresholds
*
* Error counter Error state
* -----------------------------------
* 0 - 95 Error-active
* 96 - 127 Error-warning
* 128 - 255 Error-passive
* 256 and greater Bus-off
*/
#define CAN_ERROR_WARNING_THRESHOLD 96
#define CAN_ERROR_PASSIVE_THRESHOLD 128
#define CAN_BUS_OFF_THRESHOLD 256
#endif /* _UAPI_CAN_ERROR_H */