linuxdebug/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml

219 lines
5.5 KiB
YAML
Raw Normal View History

2024-07-16 15:50:57 +02:00
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Cadence Torrent SD0801 PHY binding
description:
This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
hardware included with the Cadence MHDP DisplayPort controller. Torrent
PHY also supports multilink multiprotocol combinations including protocols
such as PCIe, USB, SGMII, QSGMII etc.
maintainers:
- Swapnil Jakhade <sjakhade@cadence.com>
- Yuti Amonkar <yamonkar@cadence.com>
properties:
compatible:
enum:
- cdns,torrent-phy
- ti,j721e-serdes-10g
'#address-cells':
const: 1
'#size-cells':
const: 0
'#clock-cells':
const: 1
clocks:
minItems: 1
maxItems: 2
description:
PHY reference clock for 1 item. Must contain an entry in clock-names.
Optional Parent to enable output reference clock.
clock-names:
minItems: 1
items:
- const: refclk
- const: phy_en_refclk
assigned-clocks:
maxItems: 3
assigned-clock-parents:
maxItems: 3
reg:
minItems: 1
items:
- description: Offset of the Torrent PHY configuration registers.
- description: Offset of the DPTX PHY configuration registers.
reg-names:
minItems: 1
items:
- const: torrent_phy
- const: dptx_phy
resets:
minItems: 1
items:
- description: Torrent PHY reset.
- description: Torrent APB reset. This is optional.
reset-names:
minItems: 1
items:
- const: torrent_reset
- const: torrent_apb
patternProperties:
'^phy@[0-3]$':
type: object
description:
Each group of PHY lanes with a single master lane should be represented as a sub-node.
properties:
reg:
description:
The master lane number. This is the lowest numbered lane in the lane group.
minimum: 0
maximum: 3
resets:
minItems: 1
maxItems: 4
description:
Contains list of resets, one per lane, to get all the link lanes out of reset.
"#phy-cells":
const: 0
cdns,phy-type:
description:
Specifies the type of PHY for which the group of PHY lanes is used.
Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 9
cdns,num-lanes:
description:
Number of lanes.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 3, 4]
default: 4
cdns,ssc-mode:
description:
Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
EXTERNAL_SSC or INTERNAL_SSC.
Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
default: 0
cdns,max-bit-rate:
description:
Maximum DisplayPort link bit rate to use, in Mbps
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
default: 8100
required:
- reg
- resets
- "#phy-cells"
- cdns,phy-type
- cdns,num-lanes
additionalProperties: false
required:
- compatible
- "#address-cells"
- "#size-cells"
- clocks
- clock-names
- reg
- reg-names
- resets
- reset-names
additionalProperties: false
examples:
- |
#include <dt-bindings/phy/phy.h>
bus {
#address-cells = <2>;
#size-cells = <2>;
torrent-phy@f0fb500000 {
compatible = "cdns,torrent-phy";
reg = <0xf0 0xfb500000 0x0 0x00100000>,
<0xf0 0xfb030a00 0x0 0x00000040>;
reg-names = "torrent_phy", "dptx_phy";
resets = <&phyrst 0>;
reset-names = "torrent_reset";
clocks = <&ref_clk>;
clock-names = "refclk";
#address-cells = <1>;
#size-cells = <0>;
phy@0 {
reg = <0>;
resets = <&phyrst 1>, <&phyrst 2>,
<&phyrst 3>, <&phyrst 4>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_DP>;
cdns,num-lanes = <4>;
cdns,max-bit-rate = <8100>;
};
};
};
- |
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/phy/phy-cadence.h>
bus {
#address-cells = <2>;
#size-cells = <2>;
torrent-phy@f0fb500000 {
compatible = "cdns,torrent-phy";
reg = <0xf0 0xfb500000 0x0 0x00100000>;
reg-names = "torrent_phy";
resets = <&phyrst 0>, <&phyrst 1>;
reset-names = "torrent_reset", "torrent_apb";
clocks = <&ref_clk>;
clock-names = "refclk";
#address-cells = <1>;
#size-cells = <0>;
phy@0 {
reg = <0>;
resets = <&phyrst 2>, <&phyrst 3>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
cdns,num-lanes = <2>;
cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
};
phy@2 {
reg = <2>;
resets = <&phyrst 4>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_SGMII>;
cdns,num-lanes = <1>;
cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
};
};
};
...