linuxdebug/drivers/usb/renesas_usbhs/common.c

837 lines
19 KiB
C
Raw Normal View History

2024-07-16 15:50:57 +02:00
// SPDX-License-Identifier: GPL-1.0+
/*
* Renesas USB driver
*
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2019 Renesas Electronics Corporation
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include "common.h"
#include "rcar2.h"
#include "rcar3.h"
#include "rza.h"
/*
* image of renesas_usbhs
*
* ex) gadget case
* mod.c
* mod_gadget.c
* mod_host.c pipe.c fifo.c
*
* +-------+ +-----------+
* | pipe0 |------>| fifo pio |
* +------------+ +-------+ +-----------+
* | mod_gadget |=====> | pipe1 |--+
* +------------+ +-------+ | +-----------+
* | pipe2 | | +-| fifo dma0 |
* +------------+ +-------+ | | +-----------+
* | mod_host | | pipe3 |<-|--+
* +------------+ +-------+ | +-----------+
* | .... | +--->| fifo dma1 |
* | .... | +-----------+
*/
/*
* platform call back
*
* renesas usb support platform callback function.
* Below macro call it.
* if platform doesn't have callback, it return 0 (no error)
*/
#define usbhs_platform_call(priv, func, args...)\
(!(priv) ? -ENODEV : \
!((priv)->pfunc->func) ? 0 : \
(priv)->pfunc->func(args))
/*
* common functions
*/
u16 usbhs_read(struct usbhs_priv *priv, u32 reg)
{
return ioread16(priv->base + reg);
}
void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data)
{
iowrite16(data, priv->base + reg);
}
void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data)
{
u16 val = usbhs_read(priv, reg);
val &= ~mask;
val |= data & mask;
usbhs_write(priv, reg, val);
}
struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev)
{
return dev_get_drvdata(&pdev->dev);
}
int usbhs_get_id_as_gadget(struct platform_device *pdev)
{
return USBHS_GADGET;
}
/*
* syscfg functions
*/
static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable)
{
usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0);
}
void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
{
u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
u16 val = DCFM | DRPD | HSE | USBE;
/*
* if enable
*
* - select Host mode
* - D+ Line/D- Line Pull-down
*/
usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
}
void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
{
u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
u16 val = HSE | USBE;
/* CNEN bit is required for function operation */
if (usbhs_get_dparam(priv, has_cnen)) {
mask |= CNEN;
val |= CNEN;
}
/*
* if enable
*
* - select Function mode
* - D+ Line Pull-up is disabled
* When D+ Line Pull-up is enabled,
* calling usbhs_sys_function_pullup(,1)
*/
usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
}
void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
{
usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
}
void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
{
usbhs_write(priv, TESTMODE, mode);
}
/*
* frame functions
*/
int usbhs_frame_get_num(struct usbhs_priv *priv)
{
return usbhs_read(priv, FRMNUM) & FRNM_MASK;
}
/*
* usb request functions
*/
void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
{
u16 val;
val = usbhs_read(priv, USBREQ);
req->bRequest = (val >> 8) & 0xFF;
req->bRequestType = (val >> 0) & 0xFF;
req->wValue = cpu_to_le16(usbhs_read(priv, USBVAL));
req->wIndex = cpu_to_le16(usbhs_read(priv, USBINDX));
req->wLength = cpu_to_le16(usbhs_read(priv, USBLENG));
}
void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
{
usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType);
usbhs_write(priv, USBVAL, le16_to_cpu(req->wValue));
usbhs_write(priv, USBINDX, le16_to_cpu(req->wIndex));
usbhs_write(priv, USBLENG, le16_to_cpu(req->wLength));
usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
}
/*
* bus/vbus functions
*/
void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
{
u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
if (status != USBRST) {
struct device *dev = usbhs_priv_to_dev(priv);
dev_err(dev, "usbhs should be reset\n");
}
usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
}
void usbhs_bus_send_reset(struct usbhs_priv *priv)
{
usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
}
int usbhs_bus_get_speed(struct usbhs_priv *priv)
{
u16 dvstctr = usbhs_read(priv, DVSTCTR);
switch (RHST & dvstctr) {
case RHST_LOW_SPEED:
return USB_SPEED_LOW;
case RHST_FULL_SPEED:
return USB_SPEED_FULL;
case RHST_HIGH_SPEED:
return USB_SPEED_HIGH;
}
return USB_SPEED_UNKNOWN;
}
int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable)
{
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
return usbhs_platform_call(priv, set_vbus, pdev, enable);
}
static void usbhsc_bus_init(struct usbhs_priv *priv)
{
usbhs_write(priv, DVSTCTR, 0);
usbhs_vbus_ctrl(priv, 0);
}
/*
* device configuration
*/
int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
u16 upphub, u16 hubport, u16 speed)
{
struct device *dev = usbhs_priv_to_dev(priv);
u16 usbspd = 0;
u32 reg = DEVADD0 + (2 * devnum);
if (devnum > 10) {
dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
return -EIO;
}
if (upphub > 0xA) {
dev_err(dev, "unsupported hub number %d\n", upphub);
return -EIO;
}
switch (speed) {
case USB_SPEED_LOW:
usbspd = USBSPD_SPEED_LOW;
break;
case USB_SPEED_FULL:
usbspd = USBSPD_SPEED_FULL;
break;
case USB_SPEED_HIGH:
usbspd = USBSPD_SPEED_HIGH;
break;
default:
dev_err(dev, "unsupported speed %d\n", speed);
return -EIO;
}
usbhs_write(priv, reg, UPPHUB(upphub) |
HUBPORT(hubport)|
USBSPD(usbspd));
return 0;
}
/*
* interrupt functions
*/
void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit)
{
u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0);
usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask);
}
/*
* local functions
*/
static void usbhsc_set_buswait(struct usbhs_priv *priv)
{
int wait = usbhs_get_dparam(priv, buswait_bwait);
/* set bus wait if platform have */
if (wait)
usbhs_bset(priv, BUSWAIT, 0x000F, wait);
}
static bool usbhsc_is_multi_clks(struct usbhs_priv *priv)
{
return priv->dparam.multi_clks;
}
static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv)
{
if (!usbhsc_is_multi_clks(priv))
return 0;
/* The first clock should exist */
priv->clks[0] = of_clk_get(dev_of_node(dev), 0);
if (IS_ERR(priv->clks[0]))
return PTR_ERR(priv->clks[0]);
/*
* To backward compatibility with old DT, this driver checks the return
* value if it's -ENOENT or not.
*/
priv->clks[1] = of_clk_get(dev_of_node(dev), 1);
if (PTR_ERR(priv->clks[1]) == -ENOENT)
priv->clks[1] = NULL;
else if (IS_ERR(priv->clks[1]))
return PTR_ERR(priv->clks[1]);
return 0;
}
static void usbhsc_clk_put(struct usbhs_priv *priv)
{
int i;
if (!usbhsc_is_multi_clks(priv))
return;
for (i = 0; i < ARRAY_SIZE(priv->clks); i++)
clk_put(priv->clks[i]);
}
static int usbhsc_clk_prepare_enable(struct usbhs_priv *priv)
{
int i, ret;
if (!usbhsc_is_multi_clks(priv))
return 0;
for (i = 0; i < ARRAY_SIZE(priv->clks); i++) {
ret = clk_prepare_enable(priv->clks[i]);
if (ret) {
while (--i >= 0)
clk_disable_unprepare(priv->clks[i]);
return ret;
}
}
return ret;
}
static void usbhsc_clk_disable_unprepare(struct usbhs_priv *priv)
{
int i;
if (!usbhsc_is_multi_clks(priv))
return;
for (i = 0; i < ARRAY_SIZE(priv->clks); i++)
clk_disable_unprepare(priv->clks[i]);
}
/*
* platform default param
*/
/* commonly used on old SH-Mobile SoCs */
static struct renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x18, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x28, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x38, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x07, false),
};
/* commonly used on newer SH-Mobile and R-Car SoCs */
static struct renesas_usbhs_driver_pipe_config usbhsc_new_pipe[] = {
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x28, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x58, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x68, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x78, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x88, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x98, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xa8, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xb8, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xc8, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xd8, true),
};
/*
* power control
*/
static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
{
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
struct device *dev = usbhs_priv_to_dev(priv);
if (enable) {
/* enable PM */
pm_runtime_get_sync(dev);
/* enable clks */
if (usbhsc_clk_prepare_enable(priv))
return;
/* enable platform power */
usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
/* USB on */
usbhs_sys_clock_ctrl(priv, enable);
} else {
/* USB off */
usbhs_sys_clock_ctrl(priv, enable);
/* disable platform power */
usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
/* disable clks */
usbhsc_clk_disable_unprepare(priv);
/* disable PM */
pm_runtime_put_sync(dev);
}
}
/*
* hotplug
*/
static void usbhsc_hotplug(struct usbhs_priv *priv)
{
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
struct usbhs_mod *mod = usbhs_mod_get_current(priv);
int id;
int enable;
int cable;
int ret;
/*
* get vbus status from platform
*/
enable = usbhs_mod_info_call(priv, get_vbus, pdev);
/*
* get id from platform
*/
id = usbhs_platform_call(priv, get_id, pdev);
if (enable && !mod) {
if (priv->edev) {
cable = extcon_get_state(priv->edev, EXTCON_USB_HOST);
if ((cable > 0 && id != USBHS_HOST) ||
(!cable && id != USBHS_GADGET)) {
dev_info(&pdev->dev,
"USB cable plugged in doesn't match the selected role!\n");
return;
}
}
ret = usbhs_mod_change(priv, id);
if (ret < 0)
return;
dev_dbg(&pdev->dev, "%s enable\n", __func__);
/* power on */
if (usbhs_get_dparam(priv, runtime_pwctrl))
usbhsc_power_ctrl(priv, enable);
/* bus init */
usbhsc_set_buswait(priv);
usbhsc_bus_init(priv);
/* module start */
usbhs_mod_call(priv, start, priv);
} else if (!enable && mod) {
dev_dbg(&pdev->dev, "%s disable\n", __func__);
/* module stop */
usbhs_mod_call(priv, stop, priv);
/* bus init */
usbhsc_bus_init(priv);
/* power off */
if (usbhs_get_dparam(priv, runtime_pwctrl))
usbhsc_power_ctrl(priv, enable);
usbhs_mod_change(priv, -1);
/* reset phy for next connection */
usbhs_platform_call(priv, phy_reset, pdev);
}
}
/*
* notify hotplug
*/
static void usbhsc_notify_hotplug(struct work_struct *work)
{
struct usbhs_priv *priv = container_of(work,
struct usbhs_priv,
notify_hotplug_work.work);
usbhsc_hotplug(priv);
}
int usbhsc_schedule_notify_hotplug(struct platform_device *pdev)
{
struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
int delay = usbhs_get_dparam(priv, detection_delay);
/*
* This functions will be called in interrupt.
* To make sure safety context,
* use workqueue for usbhs_notify_hotplug
*/
schedule_delayed_work(&priv->notify_hotplug_work,
msecs_to_jiffies(delay));
return 0;
}
/*
* platform functions
*/
static const struct of_device_id usbhs_of_match[] = {
{
.compatible = "renesas,usbhs-r8a774c0",
.data = &usbhs_rcar_gen3_with_pll_plat_info,
},
{
.compatible = "renesas,usbhs-r8a7790",
.data = &usbhs_rcar_gen2_plat_info,
},
{
.compatible = "renesas,usbhs-r8a7791",
.data = &usbhs_rcar_gen2_plat_info,
},
{
.compatible = "renesas,usbhs-r8a7794",
.data = &usbhs_rcar_gen2_plat_info,
},
{
.compatible = "renesas,usbhs-r8a7795",
.data = &usbhs_rcar_gen3_plat_info,
},
{
.compatible = "renesas,usbhs-r8a7796",
.data = &usbhs_rcar_gen3_plat_info,
},
{
.compatible = "renesas,usbhs-r8a77990",
.data = &usbhs_rcar_gen3_with_pll_plat_info,
},
{
.compatible = "renesas,usbhs-r8a77995",
.data = &usbhs_rcar_gen3_with_pll_plat_info,
},
{
.compatible = "renesas,rcar-gen2-usbhs",
.data = &usbhs_rcar_gen2_plat_info,
},
{
.compatible = "renesas,rcar-gen3-usbhs",
.data = &usbhs_rcar_gen3_plat_info,
},
{
.compatible = "renesas,rza1-usbhs",
.data = &usbhs_rza1_plat_info,
},
{
.compatible = "renesas,rza2-usbhs",
.data = &usbhs_rza2_plat_info,
},
{ },
};
MODULE_DEVICE_TABLE(of, usbhs_of_match);
static int usbhs_probe(struct platform_device *pdev)
{
const struct renesas_usbhs_platform_info *info;
struct usbhs_priv *priv;
struct device *dev = &pdev->dev;
struct gpio_desc *gpiod;
int ret;
u32 tmp;
int irq;
/* check device node */
if (dev_of_node(dev))
info = of_device_get_match_data(dev);
else
info = renesas_usbhs_get_info(pdev);
/* check platform information */
if (!info) {
dev_err(dev, "no platform information\n");
return -EINVAL;
}
/* platform data */
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
/* usb private data */
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
if (of_property_read_bool(dev_of_node(dev), "extcon")) {
priv->edev = extcon_get_edev_by_phandle(dev, 0);
if (IS_ERR(priv->edev))
return PTR_ERR(priv->edev);
}
priv->rsts = devm_reset_control_array_get_optional_shared(dev);
if (IS_ERR(priv->rsts))
return PTR_ERR(priv->rsts);
/*
* care platform info
*/
priv->dparam = info->driver_param;
if (!info->platform_callback.get_id) {
dev_err(dev, "no platform callbacks\n");
return -EINVAL;
}
priv->pfunc = &info->platform_callback;
/* set default param if platform doesn't have */
if (usbhs_get_dparam(priv, has_new_pipe_configs)) {
priv->dparam.pipe_configs = usbhsc_new_pipe;
priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
} else if (!priv->dparam.pipe_configs) {
priv->dparam.pipe_configs = usbhsc_default_pipe;
priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe);
}
if (!priv->dparam.pio_dma_border)
priv->dparam.pio_dma_border = 64; /* 64byte */
if (!of_property_read_u32(dev_of_node(dev), "renesas,buswait", &tmp))
priv->dparam.buswait_bwait = tmp;
gpiod = devm_gpiod_get_optional(dev, "renesas,enable", GPIOD_IN);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
/* FIXME */
/* runtime power control ? */
if (priv->pfunc->get_vbus)
usbhs_get_dparam(priv, runtime_pwctrl) = 1;
/*
* priv settings
*/
priv->irq = irq;
priv->pdev = pdev;
INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
spin_lock_init(usbhs_priv_to_lock(priv));
/* call pipe and module init */
ret = usbhs_pipe_probe(priv);
if (ret < 0)
return ret;
ret = usbhs_fifo_probe(priv);
if (ret < 0)
goto probe_end_pipe_exit;
ret = usbhs_mod_probe(priv);
if (ret < 0)
goto probe_end_fifo_exit;
/* dev_set_drvdata should be called after usbhs_mod_init */
platform_set_drvdata(pdev, priv);
ret = reset_control_deassert(priv->rsts);
if (ret)
goto probe_fail_rst;
ret = usbhsc_clk_get(dev, priv);
if (ret)
goto probe_fail_clks;
/*
* deviece reset here because
* USB device might be used in boot loader.
*/
usbhs_sys_clock_ctrl(priv, 0);
/* check GPIO determining if USB function should be enabled */
if (gpiod) {
ret = !gpiod_get_value(gpiod);
if (ret) {
dev_warn(dev, "USB function not selected (GPIO)\n");
ret = -ENOTSUPP;
goto probe_end_mod_exit;
}
}
/*
* platform call
*
* USB phy setup might depend on CPU/Board.
* If platform has its callback functions,
* call it here.
*/
ret = usbhs_platform_call(priv, hardware_init, pdev);
if (ret < 0) {
dev_err(dev, "platform init failed.\n");
goto probe_end_mod_exit;
}
/* reset phy for connection */
usbhs_platform_call(priv, phy_reset, pdev);
/* power control */
pm_runtime_enable(dev);
if (!usbhs_get_dparam(priv, runtime_pwctrl)) {
usbhsc_power_ctrl(priv, 1);
usbhs_mod_autonomy_mode(priv);
} else {
usbhs_mod_non_autonomy_mode(priv);
}
/*
* manual call notify_hotplug for cold plug
*/
usbhsc_schedule_notify_hotplug(pdev);
dev_info(dev, "probed\n");
return ret;
probe_end_mod_exit:
usbhsc_clk_put(priv);
probe_fail_clks:
reset_control_assert(priv->rsts);
probe_fail_rst:
usbhs_mod_remove(priv);
probe_end_fifo_exit:
usbhs_fifo_remove(priv);
probe_end_pipe_exit:
usbhs_pipe_remove(priv);
dev_info(dev, "probe failed (%d)\n", ret);
return ret;
}
static int usbhs_remove(struct platform_device *pdev)
{
struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
dev_dbg(&pdev->dev, "usb remove\n");
/* power off */
if (!usbhs_get_dparam(priv, runtime_pwctrl))
usbhsc_power_ctrl(priv, 0);
pm_runtime_disable(&pdev->dev);
usbhs_platform_call(priv, hardware_exit, pdev);
usbhsc_clk_put(priv);
reset_control_assert(priv->rsts);
usbhs_mod_remove(priv);
usbhs_fifo_remove(priv);
usbhs_pipe_remove(priv);
return 0;
}
static __maybe_unused int usbhsc_suspend(struct device *dev)
{
struct usbhs_priv *priv = dev_get_drvdata(dev);
struct usbhs_mod *mod = usbhs_mod_get_current(priv);
if (mod) {
usbhs_mod_call(priv, stop, priv);
usbhs_mod_change(priv, -1);
}
if (mod || !usbhs_get_dparam(priv, runtime_pwctrl))
usbhsc_power_ctrl(priv, 0);
return 0;
}
static __maybe_unused int usbhsc_resume(struct device *dev)
{
struct usbhs_priv *priv = dev_get_drvdata(dev);
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
if (!usbhs_get_dparam(priv, runtime_pwctrl)) {
usbhsc_power_ctrl(priv, 1);
usbhs_mod_autonomy_mode(priv);
}
usbhs_platform_call(priv, phy_reset, pdev);
usbhsc_schedule_notify_hotplug(pdev);
return 0;
}
static SIMPLE_DEV_PM_OPS(usbhsc_pm_ops, usbhsc_suspend, usbhsc_resume);
static struct platform_driver renesas_usbhs_driver = {
.driver = {
.name = "renesas_usbhs",
.pm = &usbhsc_pm_ops,
.of_match_table = of_match_ptr(usbhs_of_match),
},
.probe = usbhs_probe,
.remove = usbhs_remove,
};
module_platform_driver(renesas_usbhs_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Renesas USB driver");
MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");