Because the TPM TIS sysbus device can be optionally plugged on the
TYPE_PLATFORM_BUS_DEVICE, have it inherit TYPE_DYNAMIC_SYS_BUS_DEVICE.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20250125181343.59151-9-philmd@linaro.org>
Because the network eTSEC device can be optionally plugged on the
TYPE_PLATFORM_BUS_DEVICE, have it inherit TYPE_DYNAMIC_SYS_BUS_DEVICE.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20250125181343.59151-8-philmd@linaro.org>
Do not explain why _X86_IOMMU devices are user_creatable,
have them inherit TYPE_DYNAMIC_SYS_BUS_DEVICE, to explicit
they can optionally be plugged on TYPE_PLATFORM_BUS_DEVICE.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250125181343.59151-7-philmd@linaro.org>
Because the RAM FB device can be optionally plugged on the
TYPE_PLATFORM_BUS_DEVICE, have it inherit TYPE_DYNAMIC_SYS_BUS_DEVICE.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250125181343.59151-6-philmd@linaro.org>
Do not explain why VFIO_PLATFORM devices are user_creatable,
have them inherit TYPE_DYNAMIC_SYS_BUS_DEVICE, to make explicit
that they can optionally be plugged on TYPE_PLATFORM_BUS_DEVICE.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20250125181343.59151-5-philmd@linaro.org>
Some TYPE_SYS_BUS_DEVICEs can be optionally dynamically
plugged on the TYPE_PLATFORM_BUS_DEVICE.
Rather than sometimes noting that with comment around
the 'user_creatable = true' line in each DeviceRealize
handler, introduce an abstract TYPE_DYNAMIC_SYS_BUS_DEVICE
class.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250125181343.59151-4-philmd@linaro.org>
When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20250125181343.59151-3-philmd@linaro.org>
Rather than using the obscure system_bus_info.instance_size,
directly use sizeof(BusState).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Message-Id: <20250125181343.59151-2-philmd@linaro.org>
Currently, neither i386 nor ARM have real hardware support for per-
thread cache, and there is no clear demand for this specific cache
topology.
Additionally, since ARM even can't support this special cache topology
in device tree, it is unnecessary to support it at this moment, even
though per-thread cache might have potential scheduling benefits for
VMs without CPU affinity.
Therefore, disable thread-level cache topology in the general machine
part. At present, i386 has not enabled SMP cache, so disabling the
thread parameter does not pose compatibility issues.
In the future, if there is a clear demand for this feature, the correct
approach would be to add a new control field in MachineClass.smp_props
and enable it only for the machines that require it.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250110145115.1574345-2-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This changes replaces the use of an explicit literal constant for
the APIC base address mask with the existing symbolic constant
intended for this purpose.
Additionally, we remove the comment about not being able to
re-enable the APIC after disabling it. This is no longer
the case after the APIC implementation's state machine was
modified in 9.0.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241209203629.74436-11-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When a property value is static (not provided by QMP or CLI),
error shouldn't happen, otherwise it is a programming error.
Therefore simplify and use &error_abort as this can't fail.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20241108154317.12129-11-philmd@linaro.org>
We're currently changing the way the source multifd migration handles
the shutdown of the multifd channels when TLS is in use to perform a
clean termination by calling gnutls_bye().
Older src QEMUs will always close the channel without terminating the
TLS session. New dst QEMUs treat an unclean termination as an error.
Add multifd_clean_tls_termination (default true) that can be switched
on the destination whenever a src QEMU <= 9.2 is in use.
(Note that the compat property is only strictly necessary for src
QEMUs older than 9.1. Due to synchronization coincidences, src QEMUs
9.1 and 9.2 can put the destination in a condition where it doesn't
see the unclean termination. Still, make the property more inclusive
to facilitate potential backports.)
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We want to pass flags into qio_channel_tls_readv() but
qio_channel_readv_full_all_eof() doesn't take a flags argument.
No functional change.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Replace g_strdup_printf("%s", value) -> g_strdup(value)
to avoid unnecessary string formatting.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
HPET device needs to access and update hpet_cfg variable, but now it is
defined in hw/i386/fw_cfg.c and Rust code can't access it.
Move hpet_cfg definition to hpet.c (and rename it to hpet_fw_cfg). This
allows Rust HPET device implements its own global hpet_fw_cfg variable,
and will further reduce the use of unsafe C code access and calls in the
Rust HPET implementation.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250210030051.2562726-2-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the boolean value enable_mlock with an enum and add a helper to
decide whether we should be calling os_mlock.
This is a stepping stone towards introducing a new mlock mode, which
will be the third possible state of this enum.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Link: https://lore.kernel.org/r/20250212143920.1269754-4-d-tatianin@yandex-team.ru
Signed-off-by: Peter Xu <peterx@redhat.com>
Right now, we only allow for writing to memory regions that allow direct
access using memcpy etc; all other writes are simply ignored. This
implies that debugging guests will not work as expected when writing
to MMIO device regions.
Let's extend cpu_memory_rw_debug() to write to more memory regions,
including MMIO device regions. Reshuffle the condition in
memory_access_is_direct() to make it easier to read and add a comment.
While this change implies that debug access can now also write to MMIO
devices, we now are also permit ELF image loads and similar users of
cpu_memory_rw_debug() to write to MMIO devices; currently we ignore
these writes.
Peter assumes [1] that there's probably a class of guest images, which
will start writing junk (likely zeroes) into device model registers; we
previously would silently ignore any such bogus ELF sections. Likely
these images are of questionable correctness and this can be ignored. If
ever a problem, we could make these cases use address_space_write_rom()
instead, which is left unchanged for now.
This patch is based on previous work by Stefan Zabka.
[1] https://lore.kernel.org/all/CAFEAcA_2CEJKFyjvbwmpt=on=GgMVamQ5hiiVt+zUr6AY3X=Xg@mail.gmail.com/
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/213
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250210084648.33798-8-david@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
We want to pass another flag that will be stored in MemTxAttrs. So pass
MemTxAttrs directly.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250210084648.33798-6-david@redhat.com
[peterx: Fix MacOS builds]
Signed-off-by: Peter Xu <peterx@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ6wQngAKCRAfewwSUazn
0SggAQDk5mp90dBJwu05kioq+Inx/bwxmamweA+FmeqAnoQ79QEApDBPfppkrN2y
AxNZL0EL5zRFU3zECSTevpRMQ3UoVQk=
=tLFD
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250212' of https://gitlab.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ6wQngAKCRAfewwSUazn
# 0SggAQDk5mp90dBJwu05kioq+Inx/bwxmamweA+FmeqAnoQ79QEApDBPfppkrN2y
# AxNZL0EL5zRFU3zECSTevpRMQ3UoVQk=
# =tLFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Feb 2025 22:08:14 EST
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250212' of https://gitlab.com/bibo-mao/qemu:
hw/loongarch/virt: CPU irq line connection improvement
hw/loongarch/virt: Remove unused ipistate
hw/loongarch/virt: Set iocsr address space when CPU is created
hw/loongarch/virt: Add separate file for fdt building
hw/loongarch/virt: Rename function prefix name
hw/loongarch/virt: Rename filename acpi-build with virt-acpi-build
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Interrupt controller extioi and ipi connect to CPU with irq line method.
With command -smp x, -device la464-loongarch-cpu, smp.cpus is not
accurate for all possible CPU objects, possible_cpu_arch_ids() is used.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Field ipistate in LoongArch CPU object is not used any more,
remove it here.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
There is only one iocsr address space for the whole virt-machine
board. When CPU is created, the one of percpu points to that of
the board.
Here set iocsr address space when CPU is created rather than IPI
creation stage.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Similiar with virt-acpi-build.c, file virt-fdt-build.c is added here.
And move functions relative with fdt table building to the file.
It is only code movement and there is no function change.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replace function prefix name loongarch_xxx with virt_xxx in file
virt-acpi-build.c
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
File acpi-build.c is relative with virt machine type, rename it with
virt-acpi-build.c
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
For pseries machines, commit 567b5b309abe ("vfio/pci: Relax DMA map
errors for MMIO regions") introduced 2 error reports to notify the
user of MMIO mapping errors. Consolidate both code paths under one.
Cc: Harsh Prateek Bora <harshpb@linux.ibm.com>
Cc: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250206131438.1505542-8-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, the mapping handlers of the IOMMU backends, VFIO IOMMU Type
1 aka. legacy and IOMMUFD, return an errno and also report an error.
This can lead to excessive log messages at runtime for recurring DMA
mapping errors. Since these errors are already reported by the callers
in the vfio_container_dma_un/map() routines, simply remove them and
allow the callers to handle the reporting.
The mapping handler of the IOMMUFD backend has a comment suggesting
MMIO region mapping failures return EFAULT. I am not sure this is
entirely true, so keep the EFAULT case until the conditions are
clarified.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250206131438.1505542-7-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When the IOMMU address space width is smaller than the physical
address width, a MMIO region of a device can fail to map because the
region is outside the supported IOVA ranges of the VM. In this case,
PCI peer-to-peer transactions on BARs are not supported. This can
occur with the 39-bit IOMMU address space width, as can be the case on
some Intel consumer processors, or when using a vIOMMU device with
default settings.
The current error message is unclear, improve it and also change the
error report to a warning because it is a non fatal condition for the
VM. To prevent excessive log messages, restrict these recurring DMA
mapping errors to a single warning at runtime.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250206131438.1505542-6-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This helper will be useful in the listener handlers to extract the
VFIO device from a memory region using memory_region_owner(). At the
moment, we only care for PCI passthrough devices. If the need arises,
we will add more.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250206131438.1505542-5-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Rephrase a bit the ending comment about how errors are handled
depending on the phase in which vfio_listener_region_add() is called.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250206131438.1505542-4-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This is to be consistent with other reported errors related to vIOMMU
devices.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250206131438.1505542-3-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When iommufd_cdev_ram_block_discard_disable() fails for whatever reason,
errp should be set or else SIGSEV is triggered in vfio_realize() when
error_prepend() is called.
By this chance, use the same error message for both legacy and iommufd
backend.
Fixes: 5ee3dc7af785 ("vfio/iommufd: Implement the iommufd backend")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20250116102307.260849-1-zhenzhong.duan@intel.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
With the introduction of config_offset field, VFIOConfigMirrorQuirk can
now be used for those mirrored register in igd bar0. This eliminates
the need for the macro intoduced in 1a2623b5c9e7 ("vfio/igd: add macro
for declaring mirrored registers").
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20250104154219.7209-4-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Device may only expose a specific portion of PCI config space through a
region in a BAR, such behavior is seen in igd GGC and BDSM mirrors in
BAR0. To handle these, config_offset is introduced to allow mirroring
arbitrary region in PCI config space.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20250104154219.7209-3-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Declare generic vfio_generic_{window_address,window_data,mirror}_quirk
in newly created pci_quirks.h so that they can be used elsewhere, like
igd.c.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20250104154219.7209-2-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The risk is mainly theoretical since the applied bit mask will keep
the 'ggms' shift value below 3. Nevertheless, let's use a 64 bit
integer type and resolve the coverity issue.
Resolves: Coverity CID 1585908
Fixes: 1e1eac5f3dcd ("vfio/igd: canonicalize memory size calculations")
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20250107130604.669697-1-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
=UF0n
-----END PGP SIGNATURE-----
Merge tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
# KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
# 2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
# NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
# 42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
# Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
# 87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
# =UF0n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Feb 2025 08:54:51 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu:
tests/tcg: Add late gdbstub attach test
docs/user: Document the %d placeholder and suspend=n QEMU_GDB features
gdbstub: Allow late attachment
osdep: Introduce qemu_kill_thread()
user: Introduce host_interrupt_signal
user: Introduce user/signal.h
gdbstub: Try unlinking the unix socket before binding
gdbstub: Allow the %d placeholder in the socket path
tests/qtest/migration: Pick smoke tests
tests/qtest/migration: Add --full option
Revert "util/timer: avoid deadlock when shutting down"
tests/qtest: tighten up the checks on clock_step
tests/qtest: rename qtest_send_prefix and roll-up into qtest_send
tests/qtest: simplify qtest_process_inbuf
tests/qtest: don't step clock at start of npcm7xx periodic IRQ test
tests/qtest: don't attempt to clock_step while waiting for virtio ISR
tests/docker: replicate the check-rust-tools-nightly CI job
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
qtest_send_prefix never actually sent something over the chardev, all
it does is print the timestamp to the QTEST_LOG when enabled. So
rename the function, make it static, remove the unused CharDev and
simplify all the call sites by handling that directly with
qtest_send (and qtest_log_send).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-6-alex.bennee@linaro.org>
A small series of patches which enhance the graphics output on 64-bit hppa
machines. Allow disabling the artist graphic card and introduces drivers for
the Diva GSP (remote management) cards which are used in later 64-bit machines
and which we now use for serial console output.
The LMMIO regions of the Astro chip are now supported too, which is important
to support other graphic cards like an ATI PCI card with a 64-bit Linux kernel.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ6Z1YQAKCRD3ErUQojoP
X+LvAP0dXGZDtE9Lj5SWuZZVLd/g/KIqx7cvGcRFQSnmAEvqSAD/SIUmCzjxrHfD
KOUS+DVaCd7xvSIEJtzch2zBL5jvuAw=
=H3Wz
-----END PGP SIGNATURE-----
Merge tag 'hppa-system-for-v10-diva-artist-pull-request' of https://github.com/hdeller/qemu-hppa into staging
HPPA graphics and serial console enhancements
A small series of patches which enhance the graphics output on 64-bit hppa
machines. Allow disabling the artist graphic card and introduces drivers for
the Diva GSP (remote management) cards which are used in later 64-bit machines
and which we now use for serial console output.
The LMMIO regions of the Astro chip are now supported too, which is important
to support other graphic cards like an ATI PCI card with a 64-bit Linux kernel.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ6Z1YQAKCRD3ErUQojoP
# X+LvAP0dXGZDtE9Lj5SWuZZVLd/g/KIqx7cvGcRFQSnmAEvqSAD/SIUmCzjxrHfD
# KOUS+DVaCd7xvSIEJtzch2zBL5jvuAw=
# =H3Wz
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Feb 2025 16:04:33 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-system-for-v10-diva-artist-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa
hw/pci-host/astro: Add LMMIO range support
hw/hppa: Avoid creation of artist if disabled on command line
artist: Allow disabling artist on command line
hw/hppa: Wire up Diva GSP card
hw/char: Add emulation of Diva GSP PCI management boards
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Our current handling of the mask/compare logic in the Cadence
GEM ethernet device is wrong:
(1) we load the same byte twice from rx_buf when
creating the compare value
(2) we ignore the DISABLE_MASK flag
The "Cadence IP for Gigabit Ethernet MAC Part Number: IP7014 IP Rev:
R1p12 - Doc Rev: 1.3 User Guide" states that if the DISABLE_MASK bit
in type2_compare_x_word_1 is set, the mask_value field in
type2_compare_x_word_0 is used as an additional 2 byte Compare Value.
Correct these bugs:
* in the !disable_mask codepath, use lduw_le_p() so we
correctly load a 16-bit value for comparison
* in the disable_mask codepath, we load a full 4-byte value
from rx_buf for the comparison, set the compare value to
the whole of the cr0 register (i.e. the concatenation of
the mask and compare fields), and set mask to 0xffffffff
to force a 32-bit comparison
Signed-off-by: Andrew Yuan <andrew.yuan@jaguarmicro.com>
Message-id: 20241219061658.805-1-andrew.yuan@jaguarmicro.com
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: Expand commit message and comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20250130112615.3219-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No need to duplicate and forward the 'num-cpu' property from
TYPE_ARM11MPCORE_PRIV to TYPE_REALVIEW_MPCORE, alias it with
QOM object_property_add_alias().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20250130112615.3219-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The A7MPCore forward the IRQs from its internal GIC.
To make the code clearer, add the 'mpcore' and 'gic'
variables.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250130112615.3219-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The A7MPCore forward the IRQs from its internal GIC.
To make the code clearer, add the 'mpcore' and 'gic'
variables. Rename 'd' variable as 'cpu'.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250130112615.3219-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The A9MPCore forward the IRQs from its internal GIC.
To make the code clearer, add the 'mpcore' and 'gic'
variables.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250130112615.3219-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
