In heterogeneous setup the first vCPU might not be
the one expected, better pass it explicitly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20250130112615.3219-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Improve tracing of 9p 'Topen' request type by showing open() flags as
human-readable text.
E.g. trace output:
v9fs_open tag 0 id 12 fid 2 mode 100352
would become:
v9fs_open tag=0 id=12 fid=2 mode=100352(RDONLY|NONBLOCK|DIRECTORY|
TMPFILE|NDELAY)
Therefor add a new utility function qemu_open_flags_tostr() that converts
numeric open() flags from host's native O_* flag constants to a string
presentation.
9p2000.L and 9p2000.u protocol variants use different numeric 'mode'
constants for 'Topen' requests. Instead of writing string conversion code
for both protocol variants, use the already existing conversion functions
that convert the mode flags from respective protocol constants to host's
native open() numeric flag constants and pass that result to the new
string conversion function qemu_open_flags_tostr().
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <E1tTgDR-000oRr-9g@kylie.crudebyte.com>
1a6ed33cc5 introduced option multidevs=remap|forbid|warn and made
"warn" the default option.
As it turned out though, e.g. by several reports in conjunction with
following 9p client issue:
850925a813
Many people are just ignoring this warning, or even do not notice the
warning at all. Therefore make multidevs=remap the new default option to
prevent people to run into such kind of severe misbehaviours in the first
place.
From performance PoV the runtime overhead of multidevs=remap is
neglectable with few or even just only one device being shared with the
same 9p export, expected to be constant Theta(1). The inode numbers
emitted to guest also just loose one bit (since 6b6aa8285d) for the 1st
device being shared.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <09cc84e5561f66b6a8cf49b3532c6c78a6acc806.1734876877.git.qemu_oss@crudebyte.com>
'Twalk' is the most important request type in the 9p protocol to look out
for when debugging 9p communication. That's because it is the only part
of the 9p protocol which actually deals with human-readable path names,
whereas all other 9p request types work on numeric file IDs (FIDs) only.
Improve tracing of 'Twalk' requests, e.g. let's say client wanted to walk
to "/home/bob/src", then improve trace output from:
v9fs_walk tag 0 id 110 fid 0 newfid 1 nwnames 3
to:
v9fs_walk tag=0 id=110 fid=0 newfid=1 nwnames=3 wnames={home, bob, src}
To achieve this, add a new helper function trace_v9fs_walk_wnames() which
converts the received V9fsString array of individual path elements into a
comma-separated string presentation for being passed to the tracing system.
As this conversion is somewhat expensive, this conversion function is only
called if tracing of event 'v9fs_walk' is currently enabled.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <E1tJamT-007Cqk-9E@kylie.crudebyte.com>
BLOCK_OP_TYPE_DATAPLANE prevents BlockDriverState from being used by
virtio-blk/virtio-scsi with IOThread. Commit b112a65c52aa ("block:
declare blockjobs and dataplane friends!") eliminated the main reason
for this blocker in 2014.
Nowadays the block layer supports I/O from multiple AioContexts, so
there is even less reason to block IOThread users. Any legitimate
reasons related to interference would probably also apply to
non-IOThread users.
The only remaining users are bdrv_op_unblock(BLOCK_OP_TYPE_DATAPLANE)
calls after bdrv_op_block_all(). If we remove BLOCK_OP_TYPE_DATAPLANE
their behavior doesn't change.
Existing bdrv_op_block_all() callers that don't explicitly unblock
BLOCK_OP_TYPE_DATAPLANE seem to do so simply because no one bothered to
rather than because it is necessary to keep BLOCK_OP_TYPE_DATAPLANE
blocked.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20250203182529.269066-1-stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Each Astro on 64-bit machines supports up to four LMMIO regions.
Those regions are used by graphic cards and other PCI devices which
need to map huge memory areas. The LMMIO regions are configured and
set up by SeaBIOS-hppa and then used as-is by the operating systems
(Linux, HP-UX).
With this addition it's now possible to add other PCI graphic
cards on the command line, e.g. with "-device ati-vga".
Signed-off-by: Helge Deller <deller@gmx.de>
Do not create the artist graphic card if the user disabled it
with "-global artist.disable=true" on the command line.
Signed-off-by: Helge Deller <deller@gmx.de>
Allow users to disable the artist graphic card on the command line
with the option "-global artist.disable=true".
This change allows to use other graphic cards when using Linux, e.g.
by adding "-device ati-vga".
Signed-off-by: Helge Deller <deller@gmx.de>
Until now we used a standard serial-pci device to emulate a HP serial
console. This worked nicely with 32-bit Linux and 32-bit HP-UX, but
64-bit HP-UX crashes with it and expects either a Diva GSP card, or a real
64-bit capable PCI graphic card (which we don't have yet).
In order to continue with 64-bit HP-UX, switch over to the recently
added Diva GSP card emulation.
Signed-off-by: Helge Deller <deller@gmx.de>
The Diva GSP ("Guardian Service Processor") PCI boards are Remote
Management cards for PA-RISC machines. They come with built-in 16550A
UARTs for serial consoles and modem functionalities, as well as a
mailbox-like memory area for hardware auto-reboot functionality.
Latest generation HP PA-RISC server machines use those Diva cards
for console output.
Signed-off-by: Helge Deller <deller@gmx.de>
The 64-bit hppa qemu emulation still fails to boot 64-bit HP-UX.
This patch series improves the emulation a lot, since it enables us to boot
64-bit HP-UX installer silently up until an endless loop where the machine
reports that it's up an running (it crashed before). This still needs further
analysis, but it's a big step forward.
Main changes to archieve this includes:
- Implementing diagnose registers (especially %dr2 for space-register hashing)
- a new SeaBIOS-hppa version 18, which includes those fixes and enhancements:
- Fix IRT table entries to use slot number
- Increase PCI alignment for memory bars to 64k
- Fix PDC_CACHE/PDC_CACHE_RET_SPID return value
- Allow up to 256 GB RAM on 64-bit machines
V2:
- fix linux-user build by adding missing "#ifndef CONFIG_USER_ONLY ... #endif"
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5yWTwAKCRD3ErUQojoP
X1p5AP4iSfKlBsUZrww2/M1ArqB9jZuJBO1kdZ7OcCN2Jn0yxgEAx0CPUof7NnZV
EY7u3Qq4E8ZnOk4XgHt06bsdNcJN+gc=
=RoAh
-----END PGP SIGNATURE-----
Merge tag 'hppa-system-mfdiag-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa 64-bit mfdiag improvements
The 64-bit hppa qemu emulation still fails to boot 64-bit HP-UX.
This patch series improves the emulation a lot, since it enables us to boot
64-bit HP-UX installer silently up until an endless loop where the machine
reports that it's up an running (it crashed before). This still needs further
analysis, but it's a big step forward.
Main changes to archieve this includes:
- Implementing diagnose registers (especially %dr2 for space-register hashing)
- a new SeaBIOS-hppa version 18, which includes those fixes and enhancements:
- Fix IRT table entries to use slot number
- Increase PCI alignment for memory bars to 64k
- Fix PDC_CACHE/PDC_CACHE_RET_SPID return value
- Allow up to 256 GB RAM on 64-bit machines
V2:
- fix linux-user build by adding missing "#ifndef CONFIG_USER_ONLY ... #endif"
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5yWTwAKCRD3ErUQojoP
# X1p5AP4iSfKlBsUZrww2/M1ArqB9jZuJBO1kdZ7OcCN2Jn0yxgEAx0CPUof7NnZV
# EY7u3Qq4E8ZnOk4XgHt06bsdNcJN+gc=
# =RoAh
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 31 Jan 2025 04:22:23 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-system-mfdiag-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 18
target/hppa: Implement space register hashing for 64-bit HP-UX
target/hppa: 64-bit CPUs start with space register hashing enabled
target/hppa: Add instruction decoding for mfdiag and mtdiag
target/hppa: Drop diag_getshadowregs_pa2 and diag_putshadowregs_pa2
target/hppa: Add CPU diagnose registers
disas/hppa: implement mfdiag/mtdiag disassembly
hppa: Sync contents of hppa_hardware.h header file with SeaBIOS-hppa
MAINTAINERS: Add myself as HPPA maintainer
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that sd_enable() has been removed, SD::enable is set to true in
sd_instance_init() and then never changed. So we can remove it.
Note that the VMSTATE_UNUSED() size argument should be '1', not
'sizeof(bool)', as noted in the CAUTION comment in vmstate.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-12-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The sdcard_legacy.h header defines function prototypes for the "legacy"
SD card API, which was used by non-qdevified SD controller models.
We've now converted the only remaining non-qdev SD controller, so
we can drop the legacy API.
Entirely unused functions:
sd_init(), sd_set_cb(), sd_enable()
Functions which now become static inside sd.c (they are the
underlying implementations of methods on SDCardClass):
sd_do_command(), sd_write_byte(), sd_read_byte()
Removal of sd_init() means that we can also remove the
me_no_qdev_me_kill_mammoth_with_rocks flag, the codepaths that were
only reachable when it was set, and the inserted_cb and readonly_cb
qemu_irq lines that went with that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250128104519.3981448-11-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The SDCardClass has an 'enable' method, but nothing actually invokes it.
The underlying implementation is sd_enable(), which is documented
in sdcard_legacy.h as something that should not be used and was only
present for the benefit of the now-removed nseries boards. Unlike
all the other method pointers in SDCardClass, this one doesn't have
an sdbus_foo() function wrapper in hw/sd/core.c.
Remove the unused method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-10-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is a very old source file, and still has some lingering
hard-coded tabs; untabify it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-9-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The coverswitch qemu_irq is never connected to anything, and the only thing
we do with it is set it in omap_mmc_reset(). Remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-8-peter.maydell@linaro.org>
[PMD: Remove unused 'coverswitch' field]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Our style for other conversions of OMAP devices to qdev has been to
inline the creation and wiring into omap310_mpu_init() -- see for
instance the handling of omap-intc, omap-gpio and omap_i2c. Do
the same for omap-mmc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-7-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The approach we've settled on for handling the omap_clk wiring for
OMAP devices converted to QDev is to have a function omap_foo_set_clk()
whose implementation just sets the field directly in the device's
state struct. (See the "TODO" comment near the top of omap.h.)
Make omap_mmc do the same.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the OMAP MMC controller to the new SDBus API:
* the controller creates an SDBus bus
* instead of sd_foo functions on the SDState object, call
sdbus_foo functions on the SDBus
* the board code creates a proper TYPE_SD_CARD object and attaches
it to the controller's SDBus, instead of the controller creating
a card directly via sd_init() that never gets attached to any bus
* because the SD card object is on a bus, it gets reset automatically
by the "traverse the qbus tree resetting things" code, and we don't
need to manually reset the card from the controller reset function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-5-peter.maydell@linaro.org>
[PMD: Include "hw/sd/sd.h" instead of "hw/sd/sdcard_legacy.h",
create bus in omap_mmc_initfn() instead of omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The omap_mmc device has three outbound qemu_irq lines:
* one actual interrupt line
* two which connect to the DMA controller and are signalled for
TX and RX DMA
Convert these to a sysbus IRQ and two named GPIO outputs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-4-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Mechanically convert the remaining uses of 'struct omap_mmc_s' to
'OMAPMMCState'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Do a minimal conversion of the omap_mmc device model to QDev.
In this commit we do the bare minimum to produce a working device:
* add the SysBusDevice parent_obj and the usual type boilerplate
* omap_mmc_init() now returns a DeviceState*
* reset is handled by sysbus reset, so the SoC reset function
doesn't need to call omap_mmc_reset() any more
* code that should obviously be in init/realize is moved there
from omap_mmc_init()
We leave various pieces of cleanup to later commits:
* rationalizing 'struct omap_mmc_s *' to 'OMAPMMCState *'
* using gpio lines rather than having omap_mmc_init() directly
set s->irq, s->dma
* switching away from the legacy SD API and instead having
the SD card plugged into a bus
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-2-peter.maydell@linaro.org>
[PMD: Do not add omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
1 -> ELFDATA2MSB
TARGET_BIG_ENDIAN -> TARGET_BIG_ENDIAN ? ELFDATA2MSB : ELFDATA2LSB
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-7-philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
1 -> ELFDATA2MSB
Note, this allow removing the target_words_bigendian() call
in the GENERIC_LOADER device, where we pass ELFDATANONE.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-6-philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-5-philmd@linaro.org>
Last use of load_elf_ram() was removed in commit 188e255bf8e
("hw/s390x: Remove the possibility to load the s390-netboot.img
binary"), remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20250127113824.50177-3-philmd@linaro.org>
load_elf_ram_sym() with load_rom=true, sym_cb=NULL is
equivalent to load_elf_as(). Replace by the latter to
simplify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-2-philmd@linaro.org>
The variable is uint64_t so needs %PRIu64 instead of %d.
Fixes: 3ae7eb88c47 ("ehci: fix overflow in frame timer code")
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250124124713.64F8C4E6031@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This has been useful when debugging and unsure if the guest is
generating i2c traffic.
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250121105935.3069035-1-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There are a fixed number of PCI IRQs, known beforehand.
Allocate them within PCIMultiSerialState, and initialize
using qemu_init_irq(), allowing to remove the legacy
qemu_allocate_irqs() and qemu_free_irqs() calls.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121182828.45088-1-philmd@linaro.org>
The FPGA exposes a fixed set of IRQs. Hold them in the FPGA
state and initialize them in place calling qemu_init_irqs().
Move r2d_fpga_irq enums earlier so we can use NR_IRQS within
the r2d_fpga_t structure. r2d_fpga_init() returns r2d_fpga_t,
and we dereference irq from it in r2d_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121182445.35309-1-philmd@linaro.org>
No need to dynamically allocate IRQ when we know before hands
how many we'll use. Declare the 2 of them in IPackDevice state
and initialize them in the DeviceRealize handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121155526.29982-4-philmd@linaro.org>
Split IPACK Kconfig key as {IPACK, TPCI200, IP_OCTAL_232}
- IPack is a bus
- TPCI200 is a PCI device providing an IPack bus
- IP-Octal232 is an IPack device plugged on an IPack bus
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20250121155526.29982-3-philmd@linaro.org>
While qemu_init_irq() initialize a single IRQ,
qemu_init_irqs() initialize an array of them.
Suggested-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121155526.29982-2-philmd@linaro.org>
loongson3_bootp.c doesn't contain any target-specific code
and can be build generically, move it to common_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-12-philmd@linaro.org>
Propagate %processor_id from mips_loongson3_virt_init() where
we have a reference to the first vCPU, so use it instead of
the &first_cpu global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-11-philmd@linaro.org>
Remove one &first_cpu use in hw/mips/loongson3_bootp.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-10-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-9-philmd@linaro.org>
Remove one use of the 'current_machine' global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-8-philmd@linaro.org>
Propagate the %cpu_count from the machine file, allowing
to remove the "hw/boards.h" dependency (which is machine
specific) from loongson3_bootp.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-7-philmd@linaro.org>
MemMapEntry is declared in "exec/hwaddr.h", cpu_to_le32() in
"qemu/bswap.h". These headers are indirectly included via "cpu.h".
Include them explicitly in order to avoid when removing "cpu.h":
In file included from ../../hw/mips/loongson3_bootp.c:27:
hw/mips/loongson3_bootp.h:234:14: error: unknown type name 'MemMapEntry'
234 | extern const MemMapEntry virt_memmap[];
| ^
hw/mips/loongson3_bootp.c:33:18: error: call to undeclared function 'cpu_to_le32'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
33 | c->cputype = cpu_to_le32(Loongson_3A);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-6-philmd@linaro.org>
Pass the first vCPU as argument, allowing to remove
another &first_cpu global use.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-5-philmd@linaro.org>
'loaderparams' is declared statically. Let fw_conf_init()
access its 'cpu_freq' and 'ram_size' fields.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-4-philmd@linaro.org>
Create vCPUs from the last one to the first one.
No need to use the &first_cpu global since we already
have it referenced.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250115232952.31166-3-philmd@linaro.org>
main_cpu_reset() is misleadingly named "main": it resets
all vCPUs, with a special case for the first vCPU.
Factor generic_cpu_reset() out of main_cpu_reset(),
allowing to remove one &first_cpu use.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-2-philmd@linaro.org>
rx_gdbsim_init() has access to the single CPU via:
RxGdbSimMachineState {
RX62NState {
RXCPU cpu;
...
} mcu;
} s;
Directly use that instead of the &first_cpu global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250110180442.82687-1-philmd@linaro.org>
* Fix the broken aarch64_tcg_plugins test
* Add test for 64-bit mac99 machine
* Add a Linux-based test for the 40p machine
* Fix issues with record/replay of some s390x instructions
* Fix node.js crashes on emulated s390x due to a bug in the MVC instruction
* Enable virtio-balloon-pci and virtio-mem-pci on s390x
* Fix a libslirp v4.9.0 compilation problem
-----BEGIN PGP SIGNATURE-----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=rEzl
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2025-01-30' of https://gitlab.com/thuth/qemu into staging
* Convert more avocado tests to the functional framework
* Fix the broken aarch64_tcg_plugins test
* Add test for 64-bit mac99 machine
* Add a Linux-based test for the 40p machine
* Fix issues with record/replay of some s390x instructions
* Fix node.js crashes on emulated s390x due to a bug in the MVC instruction
* Enable virtio-balloon-pci and virtio-mem-pci on s390x
* Fix a libslirp v4.9.0 compilation problem
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmebewIRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUfZQ//WHrZNVQNe0d+wOtAa5Zj4X9RpadHeGO9
# WCKtBWZ1tDADHiVkZzU6L6q/LYM5FcAOE+Kah/xr8rtf6he+LCYQ0RDHbgY6/oUE
# t9TkIeph59+MMvBXWJ8flngaoVtxe8l2aYem8wk3ATPZtHyMQAZ5PAjY3+WYQAGc
# gm13k1AMD4mA6mBUOs67QSitTqBQsunKpb1IvpyBjtv9NBl61L8h5hWn0bsxa8yC
# 3KKZhw6Nclc8RVe33e6ZDrHrBi9klORd6Z+7fJ4w8Yj+C48ogfbQx+Zvb82jXhRe
# 2qGdVb6cF7LVQ5D3pECBK7yo4Lkd7MYnNvn+EmbTXhj1y5MSPdokP6k0ZWkhhkCP
# 2kIY0o5tFipdxkdDpCptU3gYJLdQFbNX2MqDFY0KeurLDGe4o6jIoRNmdZ67TJei
# zleLlcEatoyRqpCKqTNMDVeWgza3ngykhiQIrG9PMPCRQET0N4qY6db35hzDujLI
# NVuI1traCLawfCDYiMnU59dOxWSHy1bwSfnUxhZ92+Fl3AOb6c6PzhpkIGl/grwT
# 8T8EcjFyA4hpaHHKjCeNgSrKt9N0Ka2G3l9oF8eWwJm4KAlwtYBDvfVb+juGBP9+
# 8gW0lXA8tYy/P5XgPQ0N5Z8coc1xUrYBhC7v70ud3ponMmmTdhRnosey2cOFUGsN
# /U7avgXIm0Q=
# =rEzl
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Jan 2025 08:13:38 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2025-01-30' of https://gitlab.com/thuth/qemu:
net/slirp: libslirp 4.9.0 compatibility
tests/functional/test_mips_malta: Convert the mips big endian replay tests
tests/functional/test_mips64el_malta: Convert the mips64el replay tests
tests/functional/test_mipsel_malta: Convert the mipsel replay tests
tests/functional: Add the ReplayKernelBase class
tests/functional: Add a decorator for skipping long running tests
tests/functional: Extend PPC 40p test with Linux boot
s390x/s390-virtio-ccw: Support plugging PCI-based virtio memory devices
virtio-mem-pci: Allow setting nvectors, so we can use MSI-X
virtio-balloon-pci: Allow setting nvectors, so we can use MSI-X
hw/s390x/s390-virtio-ccw: Fix a record/replay deadlock
tests/tcg/s390x: Test modifying code using the MVC instruction
target/s390x: Fix MVC not always invalidating translation blocks
target/s390x: Fix PPNO execution with icount
tests/functional/test_mips_malta: Fix comment about endianness of the test
tests/functional: Add a ppc64 mac99 test
tests/functional: Fix the aarch64_tcg_plugins test
tests/functional: Convert the migration avocado test
tests/functional: Fix broken decorators with lamda functions
tests/functional/qemu_test/decorators: Fix bad check for imports
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
