In 99% cases, after QEMU migrates to dest host, it tries to detect the
target VM runstate using global_state_get_runstate().
There's one outlier so far which is Xen that won't send global state.
That's the major reason why global_state_received() check was always there
together with global_state_get_runstate().
However it's utterly confusing why global_state_received() has anything to
do with "let's start VM or not".
Provide a helper to explain it, then we have an unified entry for getting
the target dest QEMU runstate after migration.
Suggested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20241206230838.1111496-2-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Commit f5f48a7891 ("migration/multifd: Separate SYNC request with
normal jobs") changed the multifd source side to stop sending data
along with the MULTIFD_FLAG_SYNC, effectively introducing the concept
of a SYNC-only packet. Relying on that, commit d7e58f412c
("migration/multifd: Don't send ram data during SYNC") later came
along and skipped reading data from SYNC packets.
In a versions timeline like this:
8.2 f5f48a7 9.0 9.1 d7e58f41 9.2
The issue arises that QEMUs < 9.0 still send data along with SYNC, but
QEMUs > 9.1 don't gather that data anymore. This leads to various
kinds of migration failures due to desync/missing data.
Stop checking for a SYNC packet on the destination and unconditionally
unfill the packet.
>From now on:
old -> new:
the source sends data + sync, destination reads normally
new -> new:
source sends only sync, destination reads zeros
new -> old:
source sends only sync, destination reads zeros
CC: qemu-stable@nongnu.org
Fixes: d7e58f412c ("migration/multifd: Don't send ram data during SYNC")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2720
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20241213160120.23880-2-farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
It's not straightforward to see why src QEMU needs to sync multifd during
setup() phase. After all, there's no page queued at that point.
For old QEMUs, there's a solid reason: EOS requires it to work. While it's
clueless on the new QEMUs which do not take EOS message as sync requests.
One will figure that out only when this is conditionally removed. In fact,
the author did try it out. Logically we could still avoid doing this on
new machine types, however that needs a separate compat field and that can
be an overkill in some trivial overhead in setup() phase.
Let's instead document it completely, to avoid someone else tries this
again and do the debug one more time, or anyone confused on why this ever
existed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20241206224755.1108686-8-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The src flush condition check is over complicated, and it's getting more
out of control if postcopy will be involved.
In general, we have two modes to do the sync: legacy or modern ways.
Legacy uses per-section flush, modern uses per-round flush.
Mapped-ram always uses the modern, which is per-round.
Introduce two helpers, which can greatly simplify the code, and hopefully
make it readable again.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20241206224755.1108686-7-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Multifd never worked with postcopy, at least yet so far.
Remove the sync processing there, because it's confusing, and they should
never appear. Now if RAM_SAVE_FLAG_MULTIFD_FLUSH is observed, we fail hard
instead of trying to invoke multifd code.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20241206224755.1108686-6-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
RAM_SAVE_FLAG_MULTIFD_FLUSH message should always be correlated to a sync
request on src. Unify such message into one place, and conditionally send
the message only if necessary.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20241206224755.1108686-5-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Firstly, we're going to use the multifd flag soon in multifd code, so ram.c
isn't gonna work.
Secondly, we have a separate RDMA flag dangling around, which is definitely
not obvious. There's one comment that helps, but not too much.
Put all RAM save flags altogether, so nothing will get overlooked.
Add a section explain why we can't use bits over 0x200.
Remove RAM_SAVE_FLAG_FULL as it's already not used in QEMU, as the comment
explained.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20241206224755.1108686-4-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Teach multifd_send_sync_main() to sync with threads only.
We already have such requests, which is when mapped-ram is enabled with
multifd. In that case, no SYNC messages will be pushed to the stream when
multifd syncs the sender threads because there's no destination threads
waiting for that. The whole point of the sync is to make sure all threads
finished their jobs.
So fundamentally we have a request to do the sync in different ways:
- Either to sync the threads only,
- Or to sync the threads but also with the destination side.
Mapped-ram did it already because of the use_packet check in the sync
handler of the sender thread. It works.
However it may stop working when e.g. VFIO may start to reuse multifd
channels to push device states. In that case VFIO has similar request on
"thread-only sync" however we can't check a flag because such sync request
can still come from RAM which needs the on-wire notifications.
Paving way for that by allowing the multifd_send_sync_main() to specify
what kind of sync the caller needs. We can use it for mapped-ram already.
No functional change intended.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20241206224755.1108686-3-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Commit 637280aeb2 ("migration/multifd: Avoid the final FLUSH in
complete()") stopped sending the RAM_SAVE_FLAG_MULTIFD_FLUSH flag at
ram_save_complete(), because the sync on the destination side is not
needed due to the last iteration of find_dirty_block() having already
done it.
However, that commit overlooked that multifd_ram_flush_and_sync() on the
source side is also not needed at ram_save_complete(), for the same
reason.
Moreover, removing the RAM_SAVE_FLAG_MULTIFD_FLUSH but keeping the
multifd_ram_flush_and_sync() means that currently the recv threads will
hang when receiving the MULTIFD_FLAG_SYNC message, waiting for the
destination sync which only happens when RAM_SAVE_FLAG_MULTIFD_FLUSH is
received.
Luckily, multifd is still all working fine because recv side cleanup
code (mostly multifd_recv_sync_main()) is smart enough to make sure even
if recv threads are stuck at SYNC it'll get kicked out. And since this
is the completion phase of migration, nothing else will be sent after
the SYNCs.
This needs to be fixed because in the future VFIO will have data to push
after ram_save_complete() and we don't want the recv thread to be stuck
in the MULTIFD_FLAG_SYNC message.
Remove the unnecessary (and buggy) invocation of
multifd_ram_flush_and_sync().
For very old binaries (multifd_flush_after_each_section==true), the
flush_and_sync is still needed because each EOS received on destination
will enforce all-channel sync once.
Stable branches do not need this patch, as no real bug I can think of
that will go wrong there.. so not attaching Fixes to be clear on the
backport not needed.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20241206224755.1108686-2-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
>From Commit 90fa121c6c07 ("migration/multifd: Inline page_size and
page_count") onwards page_size is not part of MutiFD*Params but uses
an inline constant instead.
However, it missed updating an old usage, causing a compile error.
Fixes: 90fa121c6c07 ("migration/multifd: Inline page_size and page_count")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20241203124943.52572-1-shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Only qemu_create_machine_containers() uses the
machine_containers[] array, restrict the scope
to this single user.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250102211800.79235-9-philmd@linaro.org>
The "concrete_class" field of InterfaceClass is only ever written, and as far
as I can tell is not particularly useful when debugging either; remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20250107111308.21886-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now there's no user of container_get(), remove it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-14-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Use object_get_container() whenever applicable across the tree.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-13-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a helper to fetch a root container (under object_get_root()). Sanity
check on the type of the object.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20241121192202.4155849-12-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Use machine_get_container() whenever applicable across the tree.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-11-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a helper to fetch machine containers. Add some sanity check around.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20241121192202.4155849-10-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Currently, qdev_get_machine() has a slight misuse on container_get(), as
the helper says "get a container" but in reality the goal is to get the
machine object. It is still a "container" but not strictly.
Note that it _may_ get a container (at "/machine") in our current unit test
of test-qdev-global-props.c before all these changes, but it's probably
unexpected and worked by accident.
Switch to an explicit object_resolve_path_component(), with a side benefit
that qdev_get_machine() can happen a lot, and we don't need to split the
string ("/machine") every time. This also paves way for making the helper
container_get() never try to return a non-container at all.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-9-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When a QDev instance is realized, qdev_get_machine() ends up called.
In the next commit, qdev_get_machine() will require a "machine"
container to be always present. To satisfy this QOM containers design,
Implement qdev_create_fake_machine() which creates a fake "machine"
container for user emulation.
On system emulation, qemu_create_machine() is called from qemu_init().
For user emulation, since the TCG accelerator always calls
tcg_init_machine(), we use it to hook our fake machine creation.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250102211800.79235-2-philmd@linaro.org>
It is no longer used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250104-reuse-v18-14-c349eafd8673@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
vfio_pci_size_rom() distinguishes whether rombar is explicitly set to 1
by checking dev->opts, bypassing the QOM property infrastructure.
Use -1 as the default value for rombar to tell if the user explicitly
set it to 1. The property is also converted from unsigned to signed.
-1 is signed so it is safe to give it a new meaning. The values in
[2 ^ 31, 2 ^ 32) become invalid, but nobody should have typed these
values by chance.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250104-reuse-v18-13-c349eafd8673@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ39pJgAKCRAfewwSUazn
0YpMAQCNV9KJJ8f8EaXAw5a87mnmlcP0vRi5gZiyv1ZV9gRqPgEAhzCn/rnzpzd+
H3B1fRlD1xmaQ8IqRugQ4vfDBd9CyQY=
=OG4d
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250109' of https://gitlab.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ39pJgAKCRAfewwSUazn
# 0YpMAQCNV9KJJ8f8EaXAw5a87mnmlcP0vRi5gZiyv1ZV9gRqPgEAhzCn/rnzpzd+
# H3B1fRlD1xmaQ8IqRugQ4vfDBd9CyQY=
# =OG4d
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Jan 2025 01:13:58 EST
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250109' of https://gitlab.com/bibo-mao/qemu:
hw/intc/loongarch_extioi: Add irq routing support from physical id
hw/intc/loongarch_extioi: Remove num-cpu property
hw/intc/loongarch_extioi: Get cpu number from possible_cpu_arch_ids
target/loongarch: Only support 64bit pte width
hw/loongarch/boot: Support Linux raw boot image
hw/core/loader: Use ssize_t for efi zboot unpacker
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
data->data can be NULL when len is 0. Strictly speaking, the behavior
of memcpy() in such a scenario is undefined so UBSan complaints.
Satisfy UBSan by checking if len is 0 before memcpy().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
The system GSIs are not designed for sharing. One device might assert a
shared interrupt with qemu_set_irq() and another might deassert it, and
the level from the first device is lost.
This could be solved by refactoring the x86 GSI code to use an OrIrq
device, but that still wouldn't be ideal.
The best answer would be to have a 'resample' callback which is invoked
when the interrupt is acked at the interrupt controller, and causes the
devices to re-trigger the interrupt if it should still be pending. This
is the model that VFIO in Linux uses, with a 'resampler' eventfd that
actually unmasks the interrupt on the hardware device and thus triggers
a new interrupt from it if needed.
As things stand, QEMU currently doesn't use that VFIO interface
correctly, and just bashes on the resampler for every MMIO access to the
device "just in case". Which requires unmapping and trapping the MMIO
while an interrupt is pending!
For the Xen callback GSI, QEMU does something similar — a flag is set
which triggers a poll on *every* vmexst to see if the GSI should be
deasserted.
Proper resampler support would solve all of that, but is a task for
later which has already been on the TODO list for a while.
Since the Xen event channel GSI support *already* has hooks into the PC
gsi_handler() code for routing GSIs to PIRQs, we can use that for a
simpler bug fix.
So... remember the externally-driven state of the line (from e.g. PCI
INTx) and set the logical OR of that with the GSI. As a bonus, we now
only need to enable the polling of vcpu_info on vmexit if the Xen
callback GSI is the *only* reason the corresponding line is asserted.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/2731
Fixes: ddf0fd9ae1fd ("hw/xen: Support HVM_PARAM_CALLBACK_TYPE_GSI callback")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
The simliar with IPI interrupt controller, physical cpu id is used
for irq routing for extioi interrupt controller.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Since cpu number can be acquired from possible_cpu_arch_ids(),
num-cpu property is not necessary. Here remove num-cpu property
for object TYPE_LOONGARCH_EXTIOI_COMMON object.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Supported CPU number can be acquired from function
possible_cpu_arch_ids(), cpu-num property is not necessary.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
iFrom LoongArch Reference Manual pte width can be 64bit, 128bit
or more. Instead real hardware only supports 64bit pte width.
For 12bit pte, there is no detail definition for all 128bit
from manual.
Here only 64bit pte width is supported for simplicity, will add
this in later if real hw support it and there is definition for
all the bits from manual.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Support booting such image by parsing header as per Linux's
specification [1].
This enabled booting vmlinux.efi/vmlinuz.efi shipped by
distros without supplying BIOS.
[1]: https://docs.kernel.org/arch/loongarch/booting.html
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Convert to use sszie_t to represent size internally to avoid
large image overflowing the size.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
When unplugging the CPU, the test tries to check for a successful
unplug by changing to the /sys/devices/system/cpu/cpu1 directory
to see whether that fails. However, the "cd" could be faster than
the unplug operation in the kernel, so there is a race condition
and the test sometimes fails here.
Fix it by trying to change the directory in a loop until the the
CPU has really been unplugged.
While we're at it, also add a "cd .." before unplugging to make
the console output a little bit less confusing (since the path
is echoed in the shell prompt).
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Message-ID: <20250107115245.52755-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we introduced the deprecation rule of keeping deprecated features
for two more releases, we had to state that we would not remove features
by surprise that had already been marked as deprecated before. Nowadays,
this paragraph is not needed anymore, so we can remove it now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250103145702.597139-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been marked as deprecated two releases ago, so it should
be fine now to remove this command line option.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250103155411.721759-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the s390-ccw-virtio-2.8 machine has been removed, we don't
need the "adapter_routes_max_batch" property anymore and can remove it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20250103144232.520383-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The s390-ccw-virtio-2.8 machine is older than 6 years, so according to
our machine support policy, it can be removed now.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20250103144232.520383-10-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the last machine type that disabled cpu_model_allowed has
been removed, we can also remove the cpu_model_allowed flag itself
and all the related conditional code.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20250103144232.520383-9-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The s390-ccw-virtio-2.7 machine is older than 6 years, so according to
our machine support policy, it can be removed now.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20250103144232.520383-8-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the s390-ccw-virtio-2.6 and older machine types have been
removed, the "css_dev_path" property of the css-bridge is also not
used anymore and thus can be removed.
This way we finally get rid of the problem that has been described
in: https://gitlab.com/qemu-project/qemu/-/issues/2213
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20250103144232.520383-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the old machine types that used this property have been
removed, we can remove the property and the corresponding code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20250103144232.520383-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Only s390-ccw-virtio-2.6 and older used to set this switch to "off",
for newer machine types it is always enabled. Since we removed the
old machine types now, we can also remove the switch in the code and
assume that it is always enabled now.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20250103144232.520383-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The s390-ccw-virtio-2.6 machine is older than 6 years, so according to
our machine support policy, it can be removed now.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20250103144232.520383-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This property was only set to "off" by the old s390-ccw-virtio-2.4
machine type which has now been removed. So we can now remove the
property and the related code, too.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20250103144232.520383-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
They are older than 6 years, so according to our machine support
policy, they can be removed now.
This removes the requirements for the storage keys "migration-enabled"
property which will be removed in the next patch. It also removes
the code that sets "max_revision" to 0 for some CCW devices, but the
relating code in virtio-ccw.c indicates that 0 could have also been in
use for other machines types < 5.1, so further clean-up for code related
to "max_revision" won't be done yet (see also commit d55f518248f -
"virtio: skip legacy support check on machine types less than 5.1").
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20250103144232.520383-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Compiling the s390x tests on Fedora, which has the s390x cross-compiler
installed, fails with:
In file included from qemu/tests/tcg/s390x/console.c:8:
qemu/tests/tcg/s390x/../../../pc-bios/s390-ccw/sclp.c:11:10: fatal error: string.h: No such file or directory
11 | #include <string.h>
This is because Fedora does not have a cross-libc. Since console.c
already uses the SLOF libc implementation, add the respective headers
to the include path.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241216133819.78583-1-iii@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
--feature is an option for cargo but not for rustc.
Reported-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure the error log of fsfreeze hooks
when freeze/thaw/snapshot could be logged
to system logs if the default logfile of
qga can't be written or other situations
Signed-off-by: Dehan Meng <demeng@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20241225083744.277374-1-demeng@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
