Add a new device, ivshmem-flat, which is similar to the ivshmem PCI but
does not require a PCI bus. It's meant to be used on machines like those
with Cortex-M MCUs, which usually lack a PCI/PCIe bus, e.g. lm3s6965evb
and mps2-an385.
The device currently only supports the sysbus bus.
The new device, just like the ivshmem PCI device, supports both peer
notification via hardware interrupts and shared memory.
The device shared memory size can be set using the 'shmem-size' option
and it defaults to 4 MiB, which is the default size of shmem allocated
by the ivshmem server.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1134
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
[PMD: Rebased updating Property and using DEFINE_TYPES macro]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241216141818.111255-2-gustavo.romero@linaro.org>
This reverts commit 0cb3ff7c22671aa1e1e227318799ccf6762c3bea.
The original code was right in that long name in LFN directory
entry uses other parts of the entry for the name too, not just
the original "name" field. So it is wrong to limit the offset
to be within the name field. Some other mechanism is needed
to fix the ubsan report and whole messy usage of bytes past the
given field.
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some boards such as vmapple don't do real legacy PCI IRQ swizzling.
Instead, they just keep allocating more board IRQ lines for each new
legacy IRQ. Let's support that mode by giving instantiators a new
"nr_irqs" property they can use to support more than 4 legacy IRQ lines.
In this mode, GPEX will export more IRQ lines, one for each device.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241223221645.29911-9-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* Remove overlapping memory regions of the "next-cube" machine
* Encapsulate the next-cube SCSI related code into a separate device
* QOM-ify the next-rtc device
* Declare m68k devices as big endian instead of native endian
* Disable the CD-ROM drive for the next-cube machine
-----BEGIN PGP SIGNATURE-----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=js2G
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-12-29' of https://gitlab.com/huth/qemu into staging
* Rework "next-cube" to bring it up-to-date with current coding standards/APIs
* Remove overlapping memory regions of the "next-cube" machine
* Encapsulate the next-cube SCSI related code into a separate device
* QOM-ify the next-rtc device
* Declare m68k devices as big endian instead of native endian
* Disable the CD-ROM drive for the next-cube machine
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmdw93wTHGh1dGhAdHV4
# ZmFtaWx5Lm9yZwAKCRAu2dd0/nAttdVOEACEqPMTb5cea/fsI6x29dxx0btnNZaB
# MhN72qmmGS1GMr03u6hGMrIPgkFa/HQL86SAUxWDt4qg3XJKpJ8p9KLqFm393Dgi
# UEZnvzhX2NP23Cf4M0EaHSAeQOfaYdsgOzivo+7fQUIkpXaRpmu+3VIjvhUESSOb
# 37p1kqdjXf73t7aUMBXA2hCZctm+vOOKdJd25MfrhZp6Yvxly90P2QW+lKzFBUIp
# d2uyZ/FaBXKiGWHMTmpbloIvL6sP8ag/e+deRfKQlBlC3lVpTyREvAKoNret5Rgt
# uYQ1Erbo7Bz8BKrwFrlObbGxn1WoaoCmiPJGzPtn8mfQ33QwS8B3+Np5OfgvinAR
# B6YBXNBIenjUFgJKY9jSXy4IlzfFc4mMKn6kgTv+y9srf9Np1EgmkYuOXxxytPzP
# fE+blTWXgj6EvhUYNtqDgaN0NdW+4YSbr2Lzy/ZNGX7eLJ5S9PZdSU7gb2T+2y2N
# sdAkPiXP1lmTzPkG9gzQ0EljO36gOgSpKWjxf72NvluVGoTBLtKqB8NmVO1YnyVC
# 0/QA/SxZGjsT8MMlhjheWg+lCKRjzTpjfw4C8CvukSsiOHX4pnX9yRreJ2s7z6W3
# 26SxK1nIvn3VODXhXAgB23zHZlgk/lWSJXUuBOsnAk5YMgy7KyDn6r92FNBhj+e2
# 3O0SEi9HC/wUKw==
# =js2G
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 29 Dec 2024 02:17:16 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "huth@tuxfamily.org"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-12-29' of https://gitlab.com/huth/qemu: (35 commits)
next-cube: add my copyright to the top of the file
next-cube: rename old_scr2 and scr2_2 in next_scr2_rtc_update()
next-cube: move next_rtc_cmd_is_write() and next_rtc_data_in_irq() functions
next-cube: add rtc-power-out named gpio to trigger the NEXT_PWR_I interrupt
next-cube: add rtc-cmd-reset named gpio to reset the rtc state machine
next-cube: use named gpio output for next-rtc data
next-cube: move rtc-data-in gpio from next-pc to next-rtc device
next-cube: move reset of next-rtc fields from next-pc to next-rtc
next-cube: QOMify NeXTRTC
next-cube: don't use rtc phase value of -1
next-cube: use named gpio to read RTC data bit in scr2
next-cube: use named gpio to set RTC data bit in scr2
next-cube: always use retval to return rtc read values
next-cube: separate rtc read and write shift logic
next-cube: use qemu_irq to drive int_status in next_scr2_rtc_update()
next-cube: rename typedef struct NextRtc to NeXTRTC
next-cube: convert next-pc device to use Resettable interface
next-cube: rearrange NeXTState declarations to improve readability
next-cube: remove unused next.scr memory region
next-cube: add empty slots for unknown accesses to next.scr memory region
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This series has involved rewriting and/or updating a considerable part of the
next-cube emulation so update the copyright in next-cube.c to reflect this.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-34-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Rename them to old_scr2_rtc and scr2_rtc to reflect that they contain the previous
and current values of the SCR2 RTC bits.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-33-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move these functions in next-cube.c so that they are with the rest of the
next-rtc functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-32-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This allows us to decouple the next-pc and next-rtc devices from each
other in next_rtc_data_in_irq().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-31-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This allows us to decouple the next-pc and next-rtc devices from each
other in next_scr2_rtc_update().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-30-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add a named gpio output for the next-rtc data and then update
next_rtc_data_in_irq() to drive the IRQ directly. This enables the next-rtc to
next-pc data to be wired up using the standard qdev gpio APIs.
At the same time rename the pc-rtc-data-in gpio to rtc-data-in which is possible
now that the previous rtc-data-in gpio has been moved to the next-rtc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-29-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add a new rtc-data-out gpio to the next-pc device and wire it up to the next-rtc
rtc-data-in gpio using the standard qdev gpio APIs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-28-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-27-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is to allow the RTC functionality to be maintained within its own separate
device rather than as part of the next-pc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-26-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The rtc phase value of -1 is directly equivalent to using a phase value of 0 so
simplify the logic to use an initial rtc phase of 0.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-25-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is in preparation for moving NeXTRTC to its own separate device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-24-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is in preparation for moving NeXTRTC to its own separate device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-23-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Instead of shifting out rtc read values from individual rtc registers, change
the logic so that rtc read commands are executed when the last bit of the rtc
command is received and the result stored in retval. This simplifies the rtc
read logic such that the shift out logic can be consolidated for rtc phases
between 8 and 16.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-22-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Introduce a new next_rtc_cmd_is_write() function to determine if an rtc command
is a read or write, and start by using it to avoid shifting the rtc input value
if a rtc read command is executed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Rather than directly clear bit 3 in int_status in next_scr2_rtc_update(), use
a qemu_irq to drive the equivalent NEXT_PWR_I signal.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This brings the capitalisation in line with the other NeXTCube definitions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the NeXTState, next_dma and TYPE_NEXT_MACHINE definition to the same area
at the top of next-cube.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Now that the next.scr memory region is unused it can be removed and the next-pc
devices mapped directly within the machine init function. This is the last
remaining overlapping memory region within the NeXTCube machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The next.scr memory is now effectively unused, however there are 3 separate region
accesses still logged that occur when booting a NeXTStep disk image. Use the
empty_slot device to capture and ignore memory accesses to these 3 memory regions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the en ethernet MMIO accesses to a separate memory region on the next-pc
device instead of being part of the next.scr MMIO memory region.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the timer MMIO accesses to a separate memory region on the next-pc device
instead of being part of the next.scr MMIO memory region.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Since the ESCC is part of the next-pc device, move the ESCC to be a QOM child
of the next-pc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Since the ESCC device exists within the memory range of the next.scr memory region, map
the ESCC device registers as a subregion of the next.scr memory region instead of
directly to the system address space.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The dummy floppy disk device is part of the next-pc device, and not related to
the NeXTCube SCRs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The SCSI 4020/4021 logic refers to the offset of the SCSI CSRs within the NeXTCube
address space. Due to the previously overlapping memory regions, there were
duplicate MMIO accessors in the next.scr memory region for these registers but
this has now been resolved.
Move the remaining SCSI 4020/4021 logic from the next-pc device to the next-scsi
device, with the exception that the SCSI 4021 register now returns its previous
value like a normal register instead of a hardcoded 0x40 value. This also matches
how the registers are implemented in the Previous emulator.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The SCSI CSRs are located within the SCSI subsystem of the NeXT PC (Peripheral
Contoller) which is now modelled as a separate QEMU device. Add a new memory
region subregion to contain the SCSI CSRs that simply store and retrieve the
register values.
Add a new VMStateDescription for the next-scsi device to enable the SCSI CSRs
to be migrated.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This device is intended to hold the ESP SCSI controller and the NeXT SCSI CSRs.
Start by creating the device and moving the ESP SCSI controller to be an
embedded child device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move initialisation of the memory regions and GPIOs from next_pc_realize() to
the new next_pc_init() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This reflects that the SCSI interface exists within the NeXT Peripheral
Controller (PC).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the ESP SCSI and SCSI CSR registers to the new next.scsi container memory
region.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Change the start of the next.mmio memory region so that it follows on directly
after the next.dma memory region. Increase the address offsets in
next_mmio_read() and next_mmio_write(), and reduce the size of the next.mmio
memory region accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is a dummy value for the SCSI CSR which appears to have no effect when
removed. Eventually the reads/writes to this register will be directed
towards the WIP implementations in next_scr_readfn() and next_scr_writefn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The NeXT-Cube does not have a CD-ROM drive by default, and the
kernel does not seem to deal with the empty drive very well, so
let's disable the CD-ROM drive for this machine.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241214091720.49779-1-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
These devices are only used by the M68K target, which is only
built as big-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_BIG_ENDIAN (besides, the
DEVICE_LITTLE_ENDIAN case isn't tested). Simplify directly
using DEVICE_BIG_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241106184612.71897-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Fixes: 644e3c5d812 ("missing vmx features for Skylake-Server and Cascadelake-Server")
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 93dcc9390e5ad0696ae7e9b7b3a5b08c2d1b6de6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
TCG trace-events were deprecated before the v6.2 release,
and removed for v7.0.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit b4859e8f33a7d9c793a60395f792c10190cb4f78)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use the same style for deprecated / removed commands.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 916f50172baa91ddf0e669a9d6d2747055c0e610)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Hardcoded 32 bytes is used for vbsrl emulation check, there is
problem when options lsx=on,lasx=off is used for vbsrl.v instruction
in TCG mode. It injects LASX exception rather LSX exception.
Here actual operand size is used.
Cc: qemu-stable@nongnu.org
Fixes: df97f338076 ("target/loongarch: Implement xvreplve xvinsve0 xvpickve")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit d41989e7548397b469ec9c7be4cee699321a317e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Standard simpoint tool reqeusts that index of basic block index starts from 1.
Signed-off-by: ckf104 <1900011634@pku.edu.cn>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Trivial fix for the following ticket:
CID 1568580: Incorrect expression (EVALUATION_ORDER)
In "table_size = table_size = n_vectors * 16U",
"table_size" is written twice with the same value.
Cc: qemu-trivial@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Resolves: Coverity CID 1568580
Fixes: 01c1caa9d1 ("hw/riscv/virt.c, riscv-iommu-sys.c: add MSIx support")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 644e3c5d812 ("missing vmx features for Skylake-Server and Cascadelake-Server")
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
TCG trace-events were deprecated before the v6.2 release,
and removed for v7.0.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
